IKEA MIKROKLIN 204.884.86 Table Lamp instructions manual

The IKEA MIKROKLIN 204.884.86 is a modern table lamp designed for ambient lighting. It features a sleek design, energy-efficient LED light source, adjustable brightness, touch control, and a stable base. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Assembly Instructions 5. Installation & Setup 6. Operation Guide 7. Care & Maintenance 8. Technical Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: LED light source, touch-sensitive base, adjustable brightness levels, stable weighted base, and modern minimalist design.

Feature	Description
Light Source	Integrated, non-replaceable LED
Brightness Control	Touch-sensitive with 3 levels (Low, Medium, High)
Power Supply	Plug-in adapter (included)
Base Material	Weighted metal for stability
Shade Material	Fabric or plastic diffuser (model dependent)
Control Method	Touch sensor on base or cord
Color Temperature	Warm white (approx. 2700K)
Dimensions	Height: ~40cm, Base diameter: ~15cm
Warranty	Limited warranty as per IKEA policy

Package Contents

Unpack and verify all parts are present before assembly.

Lamp base (weighted)
Lamp stem/column
Lamp shade
Power adapter with cord
Touch control module (if separate)
Assembly hardware (screws, if required)
Instruction manual (this document)

WARNING! Do not discard packaging until assembly is complete and lamp is functioning.

Safety Information

Read all instructions before assembly and use.

Use only with included power adapter.
Do not place near heat sources or in damp locations.
Ensure lamp is on a stable, flat surface.
Do not attempt to disassemble or modify the lamp.
Keep out of reach of children during assembly.
Unplug before cleaning or when not in use for extended periods.

CAUTION! LED light source is not user-replaceable. Do not attempt to open the light unit.

Assembly Instructions

Follow steps in order. Assembly requires no tools.

Place the weighted base on a flat, stable surface.
Insert the lamp stem into the socket on the base. Twist clockwise until secure.
Attach the lamp shade to the top of the stem. Align and press gently until it clicks into place.
Route the power cord through the designated channel in the stem (if applicable).
Connect the power adapter to the lamp's input port.
Plug the adapter into a standard 120V AC wall outlet.

Tip: Ensure all connections are firm but do not over-tighten.

Installation & Setup

Location: Place on a stable table, desk, or nightstand away from edges.
Power: Use only the provided adapter. Do not use with dimmer switches.
First Use: Plug in. The lamp is ready for touch operation.
Touch Control: The sensor is located on the base or on the cord switch. Touch to cycle brightness.

Note: Lamp may have a slight delay when turning on/off due to touch sensor design.

Operation Guide

Touch control operation:

Turn On: Touch the sensor once. Lamp turns on to Low brightness.
Change Brightness: Touch again to cycle: Low → Medium → High → Off.
Turn Off: Touch until the lamp turns off, or unplug from outlet.
Memory Function: Lamp may remember last brightness setting when turned off and on again (model dependent).

WARNING! Do not use wet hands on the touch sensor. Ensure hands are dry.

Care & Maintenance

Unplug lamp before cleaning.

Use a soft, dry cloth to wipe the base and shade.
For fabric shades, use a vacuum with brush attachment to remove dust.
Do not use abrasive cleaners, solvents, or water.
Store in a dry place if not in use for long periods.

CAUTION! Never immerse the lamp, base, or cord in water or other liquids.

Technical Specifications

Model: MIKROKLIN 204.884.86
Power Consumption: Max 7W (LED)
Input Voltage: 100-240V AC, 50/60Hz (via adapter)
Output (Adapter): 12V DC, 0.5A
Light Output (Luminous Flux): ~500 lumens (max)
Color Rendering Index (CRI): >80
Lifespan: Approx. 25,000 hours
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Certifications: ETL listed, RoHS compliant

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / faulty outlet	Check power connection; try another outlet.
Touch control not responding	Wet hands / sensor dirty	Dry hands; clean sensor with dry cloth.
Light flickers	Loose connection / adapter issue	Check all connections; ensure adapter is fully plugged in.
Lamp turns off by itself	Overheating / auto-off feature	Ensure lamp is in a well-ventilated area; check if model has auto-off timer.
Dim light on all settings	Adapter not providing full power	Use only the original IKEA adapter.

Reset: Unplug for 60 seconds, then plug back in.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores.

Support: For assistance, contact IKEA customer service at 1-888-888-4532 or visit www.ikea-usa.com. Have the model number (204.884.86) and purchase details ready.

Recycling: Dispose of according to local regulations for electronic waste. Do not dispose of with household trash.