IKEA MICKE 602.447.45 Desk instructions manual

The IKEA MICKE 602.447.45 is a versatile and compact desk designed for home offices, study areas, or workspaces. It features a clean white finish, cable management solutions, and a sturdy construction suitable for computers, monitors, and other office essentials. Below are key sections for safety, assembly, features, setup, care, and troubleshooting.

Features at a Glance

Key components: Tabletop, frame with legs, cable management net, adjustable feet, pre-drilled holes for easy assembly.

Assembly Instructions

Unpack and inspect all parts. Assemble on a soft surface to avoid scratches.

1. Lay tabletop upside down on a protected surface.
2. Attach legs to frame using provided screws and Allen key.
3. Secure frame to tabletop using pre-drilled holes and screws.
4. Attach cable management net to underside of tabletop.
5. Install adjustable feet by screwing into bottom of legs.
6. Turn desk right-side up and check stability.

WARNING! Desk is heavy; use two people for assembly. Ensure all screws are tightened securely.

First-Time Setup

After assembly, position desk in desired location.

1. Adjust feet: Use a wrench to turn feet until desk is level.
2. Load weight evenly: Distribute items across tabletop surface.
3. Organize cables: Route cables through management net.
4. Check stability: Ensure desk does not wobble; re-adjust feet if necessary.

CAUTION! Do not exceed maximum weight capacity. Place desk on a flat, stable surface.

Specifications

• Model: MICKE 602.447.45
• Color: White
• Dimensions (W x D x H): 105 cm x 50 cm x 75 cm (41.3" x 19.7" x 29.5")
• Tabletop Thickness: 2.5 cm (1")
• Material: Particleboard, foil, steel
• Weight Capacity: 50 kg (110 lbs)
• Assembly Required: Yes
• Tools Included: Allen key
• Warranty: 10-year limited warranty
• Country of Origin: See packaging label

Parts and Hardware

All parts are included in packaging. Refer to assembly guide for part numbers.

Main Parts: Tabletop (1), Frame (1), Legs (4), Cable Management Net (1), Adjustable Feet (4).

Hardware: Screws (12), Dowels (4), Allen key (1). Picture: White laminate finish, steel frame. Assembly: Pre-drilled holes, step-by-step instructions. Safety: Weight limits, stability checks. Care: Cleaning instructions, scratch prevention.

Connecting Cable Management

Cable net attaches under tabletop. Route cables through net to keep organized.

1. Ensure desk is unloaded before attaching cable net.
2. Hook net onto pre-installed hooks under tabletop.
3. Route power cords, USB cables, etc., through net openings.
4. Adjust net tension to hold cables securely without sagging.

Tip: Use cable ties for additional organization if needed.

Adjusting and Leveling

Adjust feet to stabilize desk on uneven floors.

1. Loosen feet: Turn counterclockwise to lower, clockwise to raise.
2. Use level: Place spirit level on tabletop to check evenness.
3. Adjust individually: Turn each foot until desk is level.
4. Re-tighten: Ensure feet are snug against floor.
5. Test stability: Apply light pressure to corners; desk should not wobble.

WARNING! Do not overtighten feet; this may damage floor or desk legs.

Safety Features

Sturdy Construction: Steel frame supports weight evenly. Anti-tip Design: Wide leg base for stability. Weight Limit: Clearly marked maximum capacity.

Care & Cleaning

Use soft, damp cloth for cleaning. Avoid abrasive cleaners or solvents.

CAUTION! Do not use harsh chemicals; avoid excessive moisture. Protect from direct heat sources.

Warranty Information

10-year limited warranty. Covers manufacturing defects under normal use. Warranty does not cover damage from misuse, improper assembly, or modifications. For warranty claims, contact IKEA customer service with proof of purchase. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Reassembly: If needed, disassemble in reverse order and reassemble carefully.

Service: www.ikea.com or contact local IKEA store for parts or assistance.