IKEA MICKE 402.447.51 Drawer Unit instructions manual

The IKEA MICKE 402.447.51 is a versatile drawer unit designed for home office or storage use. It features a clean white finish, smooth-gliding drawers, and a sturdy construction. Below are key sections for safety, parts list, assembly, installation, use, care, and troubleshooting.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Installation & Placement 5. Using the Drawer Unit 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware

Before assembly, check that you have all parts listed below.

Part Name	Quantity	Description/Image Ref.
Drawer Unit Frame	1	Main body with pre-drilled holes
Drawer Fronts	3	White, with pre-attached handles
Drawer Baskets	3	Metal mesh baskets
Back Panel	1	Fiberboard panel
Cam Locks	6	Plastic locking pins
Screws	20	Various sizes for frame and drawers
Drawer Slides	6	Left and right side pairs
Allen Key	1	Included tool for assembly

Safety Information

Read all instructions before assembly and use.

Adult Assembly: This product requires assembly. Assemble only with help from another adult.
Stable Surface: Place on a flat, stable, and level surface to prevent tipping.
Weight Limit: Do not exceed 33 lbs (15 kg) per drawer. Do not place TV or heavy appliances on top.
Child Safety: Do not let children climb or hang on drawers. Keep small hardware away from children during assembly.
Tool Use: Use only the included Allen key. Do not overtighten screws.

WARNING! To prevent serious injury from tipping, this furniture must be used with the wall attachment device provided.

Assembly Instructions

Follow steps in order. Allow approximately 45-60 minutes for assembly.

Prepare Workspace: Unpack all parts on a clean, soft surface to avoid scratches.
Assemble Frame: Connect side panels to top and bottom panels using cam locks. Tighten with screws.
Attach Back Panel: Place back panel into grooves on frame. Secure with provided screws.
Install Drawer Slides: Attach slide rails to inner sides of frame as per markings.
Assemble Drawers: Connect drawer basket sides to front/back pieces. Attach drawer front to basket.
Mount Drawers: Insert drawers into slides, ensuring they click into place and glide smoothly.
Final Check: Ensure all screws are tight and drawers open/close properly.

Tip: Do not fully tighten cam locks until all frame parts are aligned.

Installation & Placement

Location: Place in a dry area away from direct heat sources or humidity.
Wall Attachment: MUST be attached to wall using included anti-tip bracket and screws into wall studs.
Leveling: Check that unit is level using a spirit level. Adjust by placing shims under feet if necessary.
Clearance: Allow at least 2 inches (5 cm) clearance behind for ventilation and cable management.

CAUTION! Never place near radiators, stoves, or other heat sources.

Using the Drawer Unit

Designed for office supplies, documents, crafts, or personal items.

Opening/Closing: Pull drawer front handle gently. Push closed until it clicks.
Weight Distribution: Place heavier items in bottom drawer, lighter items on top.
Organization: Use dividers or small containers inside drawers for better organization.
Avoid Overloading: Do not force drawer shut if overfilled.

Note: Drawers have a safety stop to prevent full extension and tipping when loaded.

Care & Maintenance

Clean with a damp cloth and mild detergent. Dry immediately.

Surface: Wipe with soft, damp cloth. Do not use abrasive cleaners or solvents.
Drawer Slides: Periodically check for smooth operation. Clean slides with dry cloth if dusty.
Hardware: Tighten any loose screws or cam locks as needed.

CAUTION! Never use steel wool or harsh chemicals. Avoid excessive moisture.

Specifications

Model: MICKE 402.447.51
Color: White
Dimensions (W x H x D): 28 ¾ x 37 ¾ x 18 ½" (73 x 96 x 47 cm)
Drawer Dimensions (each): Approx. 25 ½ x 5 ½ x 15 ¾" (65 x 14 x 40 cm)
Material: Particleboard, Fiberboard, Plastic, Steel
Weight Capacity: 33 lbs (15 kg) per drawer
Net Weight: 44 lbs (20 kg)
Required Tools: Allen key (included), Phillips screwdriver (not included for wall attachment)

Troubleshooting

Issue	Possible Cause	Solution
Drawer won't close	Overloaded or misaligned slides	Remove some items; check slide alignment and reseat drawer.
Drawer sticks or is rough	Dirt on slides or damaged roller	Clean slides with dry cloth; ensure no obstructions.
Unit wobbles	Uneven floor or loose screws	Place on level surface; tighten all frame screws and cam locks.
Gaps between panels	Cam locks not fully tightened	Use Allen key to turn cam locks clockwise until tight.
Back panel loose	Screws not fully secured	Tighten all screws holding back panel.
Wall attachment difficult	Not finding wall stud	Use a stud finder. Attach bracket firmly into stud.

Note: If parts are missing or damaged, contact IKEA customer service.

Warranty & Support

IKEA limited warranty applies. See IKEA warranty terms for details.

Contact: For missing parts, assembly help, or product issues:

Visit: www.ikea.com
Call IKEA Customer Support: 1-888-888-4532
Visit your local IKEA store with your receipt and product information.

Recycling: Dispose of packaging responsibly. Recycle cardboard and plastic. For furniture disposal, check local recycling guidelines.