IKEA MELODI 603.865.32 Lighting instructions manual

The IKEA MELODI 603.865.32 is a ceiling lamp designed for general room lighting. It features a simple, modern design suitable for various interior styles. This manual provides essential information for safe installation, operation, and maintenance of your MELODI lamp. Below are key sections covering safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Installation Instructions 4. Specifications 5. Operation 6. Bulb Replacement 7. Care & Cleaning 8. Regulatory Information 9. Troubleshooting

Features at a Glance

Key components: Ceiling plate, lamp shade, mounting hardware, and electrical cordset.

Feature	Description
Design	Modern, minimalist ceiling lamp
Material	Metal and plastic components
Mounting	Designed for direct ceiling mounting
Light Source	Compatible with various bulb types (see Specifications)
Switch	Operated by wall switch (not included)

Safety Information

Read all instructions before installation and use.

Ensure power is turned OFF at the circuit breaker before installation.
Installation should be performed by a qualified electrician if you are unsure.
Use only bulbs with the correct wattage and base type as specified.
Keep the lamp away from flammable materials.
Do not use the lamp outdoors or in damp locations unless specified.

WARNING! Risk of electric shock. Disconnect power before installation or maintenance. Do not exceed maximum wattage.

Installation Instructions

Install the lamp on a flat, stable ceiling surface.

Turn off power at the main circuit breaker.
Assemble the lamp components as shown in the included diagram.
Attach the mounting bracket to the ceiling electrical box using provided screws.
Connect the lamp wires to the household wiring (black to black, white to white, ground to ground). Secure with wire nuts.
Attach the lamp shade/body to the mounting bracket.
Install the correct bulb (see Specifications).
Restore power and test the lamp.

CAUTION! Ensure all connections are secure and wires are not pinched.

Specifications

Article Number: 603.865.32
Product Name: MELODI
Type: Ceiling Lamp
Max. Wattage: 60W (or as marked on the lamp)
Bulb Base: E26/E27 (Standard)
Recommended Bulbs: LED, CFL, or Incandescent (not exceeding max wattage)
Voltage: 120V AC, 60Hz (or suitable for your region)
Dimensions: Refer to product packaging.

Operation

Operate the lamp using your wall light switch.

Turning On/Off: Use the connected wall switch.

Note: The lamp does not have a built-in switch or dimmer unless specified. If using a dimmer switch, ensure it is compatible with the bulb type (e.g., dimmable LED).

Bulb Replacement

Always turn off power and allow bulb to cool before replacement.

Turn off the lamp at the wall switch and circuit breaker for safety.
Allow the existing bulb to cool completely if it was recently on.
Gently unscrew the old bulb counterclockwise.
Screw in the new bulb of the correct type and wattage clockwise until snug. Do not overtighten.
Restore power and test.

WARNING! Do not touch halogen bulbs with bare hands; use a cloth. Oils can cause hot spots and shorten bulb life.

Care & Cleaning

Turn off and unplug (if applicable) or switch off power before cleaning.

Use a dry, soft cloth to dust the lamp shade and body.
For tougher dirt, use a slightly damp cloth. Wipe dry immediately.
Do not use abrasive cleaners, solvents, or chemicals.

CAUTION! Never immerse the lamp in water or other liquids. Do not clean while the lamp is hot.

Regulatory Information

This product complies with applicable electrical safety standards. For EU market, it bears the CE mark. Waste electrical products should not be disposed of with household waste. Please recycle according to your local regulations. IKEA and MELODI are trademarks of Inter IKEA Systems B.V.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power off / Bulb faulty	Check circuit breaker and wall switch. Replace bulb.
Lamp flickers	Loose bulb / Loose connection	Turn off power. Tighten bulb. Check wiring connections.
Overheating	Bulb wattage too high	Replace with a bulb of correct, lower wattage.
Buzzing sound	Incompatible dimmer / Ballast (if fluorescent)	Ensure dimmer is compatible with bulb type. For fluorescent, ballast may be failing.
Light output is dim	Bulb nearing end of life / Wrong bulb type	Replace bulb. Ensure bulb type (e.g., LED vs incandescent) is suitable.

Support: For further assistance, contact IKEA customer service or visit www.ikea.com.