IKEA MAXIMERA 891.594.78 Low Drawer instructions manual

The IKEA MAXIMERA 891.594.78 is a low-profile drawer designed for seamless integration into compatible IKEA kitchen and storage systems. It features smooth-gliding runners, a robust construction, and a modern design. This manual provides essential information for safety, assembly, installation, use, care, and troubleshooting.

1. Product Overview & Contents 2. Safety Information 3. Assembly Instructions 4. Installation Guide 5. Specifications 6. Adjustments & Use 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Product Overview & Contents

Key components: Drawer front panel, drawer box, MAXIMERA runner system, assembly screws, and installation hardware.

Component	Description
Drawer Front Panel	Finished front piece, attaches to drawer box
Drawer Box	Main body of the drawer, pre-assembled or flat-packed
MAXIMERA Runners (Pair)	Smooth, full-extension gliding mechanism
Assembly Screws	For attaching front panel to drawer box
Mounting Brackets/Clips	For securing drawer to cabinet frame
Instruction Manual	This document

Safety Information

Read all instructions before assembly and installation.

Work Area: Assemble on a clean, flat, stable surface.
Lifting: The drawer front and box can be heavy; lift with care.
Tools: Use correct tools (e.g., screwdriver, drill) to avoid injury and damage.
Secure Installation: Ensure the drawer and runners are firmly attached to the cabinet to prevent tipping or falling.
Children: Do not allow children to play with or climb on the installed drawer.

WARNING! Improper installation can lead to injury or damage. Ensure the cabinet structure can support the drawer's weight when fully loaded.

Assembly Instructions

Follow these steps if the drawer box requires assembly.

Unpack: Lay out all parts and hardware. Check against the contents list.
Assemble Box: Connect the drawer bottom to the side and back panels using provided screws or connectors. Ensure corners are square.
Attach Runners: Slide the runner mechanism onto the designated slots or screw points on the sides of the drawer box. Ensure they are level and parallel.
Attach Front Panel: Align the drawer front panel with the drawer box. Use the provided screws from inside the drawer box to secure the front panel. Do not overtighten.
Check Function: Gently slide the drawer on the runners to ensure smooth movement before installation in the cabinet.

Tip: A soft mallet can help tap parts together without damaging surfaces.

Installation Guide

Installing the drawer into a compatible IKEA cabinet or a cabinet prepared with the correct runner mounting points.

Prepare Cabinet: Ensure the cabinet interior is clean and the mounting points for the runners are accessible.
Mount Cabinet Runners: Attach the counterpart of the MAXIMERA runner system to the inside side walls of the cabinet according to the cabinet's instructions. Use a level.
Insert Drawer: Align the drawer's runners with the cabinet runners. Push the drawer into the cabinet until it clicks into place.
Secure Drawer: Use any provided clips or screws to lock the drawer front to the cabinet frame for stability.
Final Adjustment: Open and close the drawer several times. Adjust the runner mounting or front panel alignment if needed for smooth operation and even gaps.

CAUTION! Do not force the drawer into place. If it does not slide in easily, check runner alignment.

Specifications

Product Name: MAXIMERA Low Drawer
Article Number: 891.594.78
Type: Low-profile drawer for base cabinets
Runner System: MAXIMERA full-extension, soft-closing
Load Capacity: Refer to IKEA product page or packaging for maximum weight limit.
Material: Particleboard, foil, plastic, steel (runners)
Finish: Various finishes available (e.g., white, gray, wood effect)
Compatibility: Designed for specific IKEA kitchen systems (e.g., SEKTION). Check compatibility before purchase.

Adjustments & Use

After installation, minor adjustments may be needed for perfect operation.

Height Adjustment: Some runner systems allow vertical adjustment via screws at the rear of the runner. Use to level the drawer.

Front Panel Alignment: If the drawer front is uneven, loosen the screws holding it to the drawer box slightly, adjust position, and retighten.

Soft-Close Feature: The MAXIMERA runner includes a soft-closing mechanism. It should close gently without slamming. If it fails, check for obstructions or damaged runners.

Daily Use: Distribute weight evenly. Avoid overloading beyond the specified capacity. Use both hands to open/close if heavily loaded.

Care & Maintenance

Unload the drawer before cleaning or maintenance.

Cleaning: Wipe the interior and exterior with a damp, soft cloth. Use mild soap if needed. Dry immediately.
Runners: Keep runners free of debris. Wipe with a dry cloth. Do not lubricate unless specified by IKEA.
Avoid: Abrasive cleaners, scouring pads, strong chemicals, and excessive moisture.

CAUTION! Water or liquids can damage the particleboard. Clean spills immediately.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer does not slide smoothly	Misaligned runners, overloaded, debris	Check alignment, reduce load, clean runners.
Drawer front is crooked	Loose or uneven mounting screws	Loosen front panel screws, align, retighten evenly.
Drawer falls out or doesn't stay closed	Runners not fully engaged, broken mechanism	Remove and re-insert drawer. Check for broken parts.
Soft-close not working	Obstruction, worn damper	Check for blockages. Damper may need replacement.
Squeaking noise	Dry runners, loose parts	Check for loose screws. Wipe runners with a dry cloth.

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty terms for details.

Spare Parts: For replacement runners, screws, or other parts, visit your local IKEA store or contact IKEA customer service with the article number (891.594.78).

Support: For assembly help or product questions:
• Visit: www.ikea.com
• Contact your local IKEA store
• Use the IKEA Assembly Instructions app

Recycling: Dispose of packaging and the product responsibly according to local regulations.