IKEA MAXIMERA 292.149.44 High Drawer instructions manual

The IKEA MAXIMERA 292.149.44 is a high drawer designed for kitchen or bathroom cabinets, featuring smooth-running slides, soft-closing mechanism, and adjustable front panel attachment. It is part of the MAXIMERA series, compatible with various SEKTION cabinet frames. Below are key sections for safety, features, assembly, installation, adjustment, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Assembly Instructions 5. Installation into Cabinet 6. Adjustments & Leveling 7. Front Panel Attachment 8. Care & Maintenance 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Drawer frame, soft-closing runners, adjustable front panel connectors, drawer bottom, assembly screws.

Feature	Description
Soft-closing mechanism	Prevents slamming; ensures quiet operation
Full extension runners	Allows complete access to drawer contents
Adjustable front connectors	For precise alignment of drawer front
Sturdy construction	Made from particleboard with melamine foil
Compatible with SEKTION	Designed for IKEA SEKTION cabinet frames
Easy to clean	Smooth surfaces resist stains
Load capacity	Up to 55 lbs (25 kg) when evenly distributed
Drawer height	High drawer profile for ample storage
Pre-drilled holes	For easy assembly and installation
Reversible design	Can be installed on left or right side

Package Contents

Unpack and verify all parts before starting assembly.

Drawer side panels (2 pieces)
Drawer front/back panel (2 pieces)
Drawer bottom panel (1 piece)
Soft-closing runners with mounting brackets (2 sets)
Front panel connectors (4 pieces)
Assembly screws and cam locks
Instruction manual

WARNING! Check for damaged parts; contact IKEA for replacements if needed.

Tools Required

Tools not included; gather before assembly.

Phillips screwdriver
Hammer (for tapping connectors if needed)
Measuring tape
Pencil
Level

CAUTION! Use correct tools to avoid damaging parts.

Assembly Instructions

Assemble drawer box before installing runners.

Lay side panels flat; attach front/back panels using cam locks.
Insert drawer bottom into grooves on all four sides.
Secure bottom with provided screws if required.
Attach soft-closing runners to drawer sides using screws.
Ensure all connections are tight and square.

Tip: Work on a soft surface to prevent scratching.

Installation into Cabinet

Cabinet Preparation: Ensure cabinet interior is clean and level.
Runner Mounting: Attach runner brackets to cabinet sides at desired height.
Drawer Insertion: Slide drawer onto mounted runners; push until it clicks.
Test Operation: Open and close drawer to verify smooth movement.
Final Check: Ensure drawer is level and aligned within cabinet opening.

Adjustments & Leveling

Use front connectors to adjust drawer front alignment.

Vertical Adjustment: Loosen screws on connectors; move drawer front up/down; retighten.

Horizontal Adjustment: Shift drawer left/right using elongated holes in connectors.

Depth Adjustment: Adjust how far drawer front sits from cabinet frame.

Use level to ensure drawer front is perfectly horizontal after adjustments.

Front Panel Attachment

Attach your chosen front panel (sold separately) to drawer.

Position front panel against drawer front.
Insert front panel connectors into pre-drilled holes in drawer.
Align panel using adjustment screws.
Tighten all screws securely.
Test opening/closing to ensure no interference.

Tip: Have a helper hold panel during alignment.

Care & Maintenance

Clean with damp cloth and mild detergent; dry immediately.

CAUTION! Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive moisture.

Periodically check runner screws for tightness; lubricate runners with silicone spray if needed.

Safety Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © IKEA; trademarks of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA store.

Warranty & Support

IKEA limited warranty applies; see warranty card for details. Keep receipt for proof of purchase. For spare parts or assistance, visit IKEA website or store with product number (292.149.44).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or doesn't close smoothly	Misaligned runners	Loosen runner brackets; realign; retighten.
Front panel uneven	Connectors not adjusted	Adjust vertical/horizontal screws on connectors.
Drawer sags when loaded	Overloaded or bottom not secured	Reduce load; ensure bottom panel is fully seated and screwed.
Soft-close not working	Runner mechanism obstructed	Clean runner track; check for debris; ensure proper installation.
Drawer won't stay closed	Cabinet not level	Level cabinet; adjust drawer front alignment.

Reset: Disassemble and reassemble if major issues persist.

Service: Contact IKEA customer support for further assistance.