IKEA MAXIMERA 092.888.51 Cabinet Frame instructions manual

The IKEA MAXIMERA 092.888.51 is a cabinet frame designed for use with MAXIMERA drawer systems, offering a sturdy and adjustable foundation for kitchen, bathroom, or storage organization. It features pre-drilled holes for easy assembly and mounting, compatibility with various IKEA fronts and handles, adjustable legs for leveling on uneven floors, and a modular design for flexible configuration. Below are key sections for safety, parts overview, assembly, installation, adjustment, and maintenance.

1. Parts & Hardware Overview 2. Safety Information 3. Assembly Instructions 4. Installation & Mounting 5. Adjusting & Leveling 6. Compatible Components 7. Care & Maintenance 8. Specifications 9. Warranty & Support 10. Troubleshooting

Parts & Hardware Overview

Key components included: Cabinet frame panels, adjustable legs, mounting brackets, screws, dowels, cam locks, and assembly instructions.

Part NameDescription
Cabinet Frame PanelsMain body panels (sides, top, bottom, back)
Adjustable Legs (4 pcs)For height adjustment and floor leveling
Mounting BracketsFor securing frame to wall or adjacent units
Screws & DowelsFor panel connections and hardware attachment
Cam LocksFor locking panels together securely
Instruction ManualStep-by-step assembly guide

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

  1. Use proper tools: Phillips screwdriver, hammer, level.
  2. Assemble on a soft surface to avoid scratches.
  3. Check all parts are present before starting.
  4. Keep small parts away from children.

WARNING! Cabinet is heavy; use two people for lifting and mounting. Secure to wall to prevent tipping.

Assembly Instructions

Follow steps in order. Do not overtighten screws.

  1. Attach adjustable legs to bottom panel using provided screws.
  2. Connect side panels to bottom panel using dowels and cam locks.
  3. Insert back panel into grooves on side and bottom panels.
  4. Attach top panel using cam locks to secure structure.
  5. Install mounting brackets to top rear of frame.

CAUTION! Ensure all cam locks are fully turned to locked position for stability.

Installation & Mounting

Tip: Use a level during installation to ensure frame is perfectly horizontal.

Adjusting & Leveling

Adjust legs to compensate for uneven floors.

  1. Place frame in desired location.
  2. Use a level on top surface.
  3. Turn leg adjusters clockwise to raise, counterclockwise to lower.
  4. Re-check level after each adjustment.

Note: All four legs should be in firm contact with floor to prevent wobbling.

Compatible Components

Designed to work with IKEA MAXIMERA system.

Component TypeCompatible Models
Drawer RunnersMAXIMERA soft-closing runners
Drawer FrontsVOXTORP, HITTARP, BODBYN, etc.
Handles/KnobsAll IKEA handles with standard screw spacing
ShelvesAdjustable shelves for MAXIMERA frames

Care & Maintenance

Clean with damp cloth and mild detergent. Avoid abrasive cleaners.

CAUTION! Do not use excessive water; wipe dry immediately. Protect from direct heat sources.

Specifications

Warranty & Support

IKEA limited warranty applies. For missing parts or assembly help, contact IKEA customer service or visit www.ikea.com.

Support: 1-888-888-4532 (IKEA US)

Troubleshooting

IssuePossible CauseSolution
Frame wobblesUneven floor/legs not adjustedRe-adjust all four legs using level.
Drawers not sliding smoothlyRunners misalignedCheck runner installation; ensure they are level and fully seated.
Panels not lockingCam locks not fully turnedTurn cam locks clockwise until "click" is heard.
Missing partsPackage incompleteContact IKEA for replacement parts.
Difficulty mounting to wallNo wall studs locatedUse appropriate wall anchors for drywall.

Note: Always use recommended IKEA hardware for safety and compatibility.

IKEA MAXIMERA 092.888.51 Cabinet Frame instructions manual © - All Rights Reserved 2025