IKEA MAXIMERA 092.887.85 Pullout Fittings instructions manual

The IKEA MAXIMERA 092.887.85 is a pull-out fitting system designed for smooth and easy access to the contents of your kitchen drawers. This manual provides essential information for safe installation, adjustment, and maintenance of your MAXIMERA pull-out fittings to ensure optimal functionality and longevity. Below are key sections covering safety, components, installation, adjustment, care, and troubleshooting.

1. Features at a Glance 2. Included Components 3. Safety Information 4. Installation Instructions 5. Adjustment & Leveling 6. Loading & Use 7. Care & Maintenance 8. Troubleshooting 9. Technical Specifications 10. Warranty & Support

Features at a Glance

Key features of the MAXIMERA pull-out system: Full extension for complete access, soft-closing mechanism, adjustable height and leveling, robust construction for heavy loads, and compatibility with various IKEA cabinet frames.

Feature	Description
Full Extension	Drawer pulls out completely for easy access to rear contents
Soft-Close Mechanism	Prevents slamming; ensures quiet and gentle closing
Adjustable Height	Allows precise alignment with cabinet opening
Load Capacity	Designed to support significant weight (refer to specifications)
Mounting Brackets	Included for secure attachment to cabinet sides
Roller System	Smooth ball-bearing rollers for effortless movement
Stopper	Prevents accidental detachment when fully extended

Included Components

Unpack and verify all parts before starting installation.

Left and right pull-out runners (with soft-close mechanism).
Mounting brackets (set of 4).
Screws and fasteners for assembly.
Adjustment keys (if applicable).
Instruction manual (this document).

NOTE: Some components may be pre-attached. Check packaging thoroughly.

Safety Information

Read all instructions before installation and use.

Ensure cabinet is securely fixed to the wall and can support the intended load.
Use appropriate tools (screwdriver, drill, level).
Wear safety glasses when drilling.
Keep children and pets away from the work area.
Do not exceed the maximum load capacity specified.

WARNING! Improper installation can lead to injury or damage. If unsure, consult a professional.

Installation Instructions

Follow these steps for proper installation.

Prepare Cabinet: Ensure interior is clean and free of obstructions. Mark desired height for runners.
Attach Mounting Brackets: Secure brackets to the inner sides of the cabinet using provided screws. Use a level to ensure they are aligned horizontally.
Install Runners: Hook the rear part of the runner onto the mounting bracket. Press down until it clicks into place. Repeat for the other side.
Attach Drawer: Slide the drawer onto the runners, ensuring it engages properly on both sides.
Test Operation: Gently pull the drawer out and push it back in. It should slide smoothly and engage the soft-close mechanism.

Tip: Refer to the included diagram for visual guidance on bracket placement.

Adjustment & Leveling

Fine-tune the drawer for perfect alignment and operation.

Height Adjustment: Loosen the screws on the mounting brackets slightly. Move the drawer up or down as needed, then retighten.
Leveling: If the drawer is uneven, adjust the front height using the adjustment screws located at the front of the runners.
Side-to-Side Alignment: Ensure equal gap on both sides between the drawer and cabinet frame.
Soft-Close Tension (if adjustable): Some models have a screw to adjust closing speed. Turn clockwise to increase tension/speed, counterclockwise to decrease.

CAUTION! Make small adjustments and test frequently.

Loading & Use

For optimal performance and safety.

Distribute weight evenly across the drawer.
Avoid placing extremely heavy items only at the very front or back.
Close the drawer gently; the soft-close mechanism will take over.
Do not slam the drawer or use excessive force.
Ensure items do not protrude beyond the drawer's edges.

WARNING! Overloading can damage the runners and void the warranty.

Care & Maintenance

Regular care ensures smooth operation.

Wipe runners with a dry or slightly damp cloth to remove dust and debris.
Avoid using abrasive cleaners, solvents, or silicone sprays on the mechanism.
Periodically check that all screws and brackets are tight.
If the slide becomes stiff, a small amount of dry lubricant (e.g., Teflon-based) can be applied to the moving parts. Avoid oil-based lubricants.

CAUTION! Do not use water or liquid cleaners directly on the metal runners.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer does not slide smoothly	Misalignment or debris	Check alignment and level; clean the runner tracks.
Drawer sticks or jams	Overloaded or obstructed	Reduce load; check for items catching on sides or cabinet.
Soft-close not working	Mechanism disengaged or damaged	Ensure drawer is properly seated on runners. Check for visible damage.
Drawer sags or is uneven	Loose brackets or incorrect adjustment	Tighten all mounting screws; re-adjust height and leveling.
Rattling noise	Loose components	Tighten all screws on brackets, runners, and drawer.

Note: For persistent issues, contact IKEA support.

Technical Specifications

Product Name: MAXIMERA Pull-out fitting
Article Number: 092.887.85
Extension: Full extension
Closing Action: Soft-close
Load Capacity: Refer to packaging or IKEA website for exact weight limit.
Material: Steel runners, plastic components.
Compatibility: Designed for IKEA cabinet systems (verify specific series).
Installation: Tool required (screwdriver, drill).

Warranty & Support

This IKEA product is covered by a limited warranty. For terms and duration, visit www.ikea.com or check your local store.

For Assembly Support: Visit the IKEA website for assembly videos and guides.

For Spare Parts: Contact your local IKEA store or visit the spare parts section online.

Customer Service: Visit www.ikea.com or contact your local IKEA store.

Safety Standards: Complies with applicable furniture safety standards.