IKEA MALM 204.846.00 4 Drawer Chest instructions manual

The IKEA MALM 204.846.00 is a modern 4-drawer chest designed for bedroom storage. Constructed from particleboard, fiberboard, and ABS plastic, it features a clean white finish, smooth-running drawers with full-extension glides, and a sturdy metal frame. Below are key sections for safety, parts list, assembly, use, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Instructions 4. Product Specifications 5. Drawer Installation & Adjustment 6. Care & Maintenance 7. Stability & Securing 8. Warranty Information 9. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Chest frame panels, drawer fronts, drawer sides/bottoms, metal drawer glides, back panel, screws, cam locks, dowels.

Part Description	Quantity	Image Ref
Main side panel (left)	1	A
Main side panel (right)	1	B
Top panel	1	C
Bottom panel	1	D
Drawer front (large)	4	E
Drawer bottom panel	4	F
Back panel (fiberboard)	1	G
Metal drawer glide set	8	H
Cam lock screws	12	I
Wooden dowels	16	J

Safety Instructions

Read all instructions before assembly. Ensure a clean, spacious work area.

Tip-Over Hazard: This chest can tip over. Always secure it to the wall using the included wall attachment device and hardware.
Assembly: Assemble on a soft surface to avoid scratches. Use correct tools (Allen key included).
Lifting: The assembled unit is heavy. Lift with care and use two people.
Children: Do not let children climb or hang on drawers. Keep small parts away from children during assembly.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure furniture to the wall.

Assembly Instructions

Follow steps in order. Estimated assembly time: 45-60 minutes.

Prepare Panels: Lay side panels (A, B) flat. Insert wooden dowels (J) into pre-drilled holes as shown.
Attach Top & Bottom: Connect top panel (C) and bottom panel (D) to side panels using cam locks (I). Tighten with Allen key.
Install Back Panel: Position back panel (G) into grooves. Secure with provided screws.
Assemble Drawers: Connect drawer sides to front (E) and back using cam locks. Insert drawer bottom (F) into slots.
Install Drawer Glides: Attach metal glides (H) to drawer sides and interior frame slots. Ensure they are level.
Insert Drawers: Slide each drawer into the frame. Test for smooth operation.

CAUTION! Do not overtighten screws or cam locks. Ensure all connections are snug but not forced.

Product Specifications

Product Name: MALM 4-drawer chest.
Article Number: 204.846.00.
Color: White.
Material: Particleboard, Fiberboard, ABS plastic, Steel.
Dimensions (W x H x D): 31 1/2" x 39 3/8" x 18 7/8" (80 x 100 x 48 cm).
Drawer Dimensions (each): 28 3/4" W x 7 7/8" H x 16 1/8" D (73 x 20 x 41 cm).
Weight: 66 lbs (30 kg) unpackaged.
Max Load per Drawer: 22 lbs (10 kg).
Country of Origin: See packaging label.

Drawer Installation & Adjustment

Drawers use full-extension metal glides for smooth operation.

Installation: Align drawer glides with frame glides. Push in until click is heard. To remove, pull drawer to full extension, press release tabs on both sides, and lift out.

Alignment: If drawer sticks or is uneven:

Empty the drawer.
Check that glides are fully seated in frame.
Ensure drawer is square; tighten cam locks if loose.
Adjust by slightly loosening glide screws on the frame, repositioning, and retightening.

Care & Maintenance

Clean with a damp cloth wrung out in mild soapy water. Wipe dry immediately.

Surfaces: Do not use abrasive cleaners, scouring pads, or solvents.
Drawers: Periodically check glide mechanisms for dust; clean with a dry cloth.
Protection: Use coasters under lamps or vases to prevent moisture damage.

CAUTION! Avoid prolonged exposure to direct sunlight or high humidity to prevent warping or color fading.

Stability & Securing

Wall Attachment is MANDATORY. Use the included tip-over restraint device.

Locate a solid wall stud.
Position the chest in its final location against the wall.
Attach the metal bracket to the back panel of the chest using provided screws.
Secure the bracket to the wall stud using a screw (not included, suitable for your wall type).
Test stability by gently pulling forward on the top drawer.

WARNING! Never place a TV or other heavy objects on top of this chest. The included restraint is designed for the chest only.

Warranty Information

IKEA limited warranty. Refer to the IKEA warranty booklet included with purchase or available at IKEA stores.

Coverage: 10-year limited warranty against manufacturing defects in materials and workmanship for everyday use in a residential setting.

Support: For missing parts, assembly questions, or warranty claims, contact IKEA Customer Service at 1-888-888-4532 or visit www.IKEA-usa.com. Have the article number (204.846.00) ready.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or won't close	Misaligned glides, overloaded	Realign glides; reduce weight; ensure drawer is square.
Chest wobbles	Uneven floor, loose connections	Adjust leveling (if applicable); tighten all cam locks and screws; ensure wall attachment is secure.
Cam lock won't tighten	Cross-threaded, misaligned dowels	Disassemble, ensure dowels are fully inserted, reconnect carefully.
Scratches on surface	Assembly damage	Use touch-up paint (available at IKEA); assemble on soft blanket.
Missing part	Packaging error	Contact IKEA Customer Service with article number for replacement.

Reassembly: If moving, disassemble in reverse order. Keep hardware organized. Re-secure to wall at new location.

Service: 1-888-888-4532; www.IKEA-usa.com