IKEA MALM 102.036.10 Dressing Table instructions manual

The IKEA MALM 102.036.10 Dressing Table is a sleek, modern furniture piece featuring a white finish, integrated mirror, and spacious drawer. Designed for bedroom or dressing room use, it requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Precautions 4. Assembly Instructions 5. Installation of Mirror 6. Drawer Installation & Adjustment 7. Care & Maintenance 8. Weight Limits & Stability 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Table top, drawer front, drawer sides, back panel, mirror frame, mirror glass, drawer runners, screws, cam locks, dowels.

Part Name	Quantity	Description
Table top	1	Main surface with pre-drilled holes
Drawer front	1	White finished drawer panel
Drawer sides	2	Left and right drawer panels
Back panel	1	Rear support panel
Mirror frame	1	Frame for attaching mirror
Mirror glass	1	Tempered safety mirror
Drawer runners	2	Slide mechanisms for drawer
Screws (4x30mm)	12	For securing panels and runners
Cam locks	6	For connecting panels
Dowels (8mm)	10	For alignment and reinforcement

Tools Required

Not included; gather before starting.

Phillips screwdriver (size #2).
Hammer (for tapping dowels).
Measuring tape.
Level (optional, for final adjustment).

WARNING! Use correct tools to avoid damaging parts or injury.

Safety Precautions

Follow these guidelines for safe assembly and use.

Assemble on soft surface (carpet, blanket) to prevent scratches.
Keep small parts away from children during assembly.
Ensure all screws and cam locks are fully tightened.
Check stability before placing items on table.

CAUTION! Two people recommended for lifting and mirror installation.

Assembly Instructions

Follow steps in order; do not overtighten screws.

Attach legs/supports: Secure back panel to table top using cam locks and dowels.
Assemble drawer: Connect drawer sides to front and back using screws; attach bottom panel.
Install drawer runners: Screw runners to inside of table frame and drawer sides.
Attach mirror frame: Secure frame to back of table top with provided screws.
Final check: Ensure all connections are tight; drawer slides smoothly.

Tip: Refer to included pictogram guide for visual reference.

Installation of Mirror

Mirror Type: Tempered safety glass.
Mounting: Secured within frame; frame attaches to table.
Adjustment: Tilt mechanism allows angle adjustment.
Safety: Ensure mounting screws are tight; avoid overtightening.

Drawer Installation & Adjustment

Drawer uses side-mounted runners for smooth operation.

Installation: Align runners on drawer and cabinet; push drawer into place until click.

Adjustment: If drawer sticks or is uneven, loosen runner screws slightly, adjust alignment, retighten.

Removal: Pull drawer fully out, depress release tabs on both sides, lift drawer out.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

Wipe surface with soft, damp cloth; dry immediately.
For mirror, use glass cleaner and soft cloth; avoid ammonia-based products on frame.
Tighten screws periodically if table becomes loose.

Tip: Do not place wet items directly on surface; use coasters.

Weight Limits & Stability

Maximum load: Table top 25 kg (55 lbs); drawer 10 kg (22 lbs).

WARNING! Do not exceed weight limits; distribute weight evenly. Secure to wall if provided with wall attachment hardware.

Troubleshooting

Issue	Possible Cause	Solution
Drawer sticks	Misaligned runners	Loosen runner screws, realign, retighten.
Table wobbles	Uneven floor or loose screws	Tighten all screws; adjust feet if available; place on level surface.
Mirror loose	Mounting screws not tight	Tighten screws securing frame to table.
Cam lock not holding	Not fully turned or stripped	Ensure cam is turned 90° to lock; replace if damaged.
Parts missing	Packaging error	Contact IKEA customer service for replacement parts.

Note: Do not force parts; reassemble step if alignment issues occur.

Warranty & Support

IKEA limited warranty applies; see warranty card for details. For missing parts or assembly help, contact IKEA customer service or visit www.ikea.com.

Support: 1-888-888-4532; www.ikea.com/us/en/customer-service