IKEA MALM 090.226.82 Bed Frame instructions manual

The IKEA MALM 090.226.82 is a queen-size bed frame featuring a clean, modern design with a high-gloss white finish. It includes a sturdy slatted bed base (LURÖY) for mattress support, underbed storage space, and requires assembly. The frame is constructed from particleboard, fiberboard, and ABS plastic. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Step-by-Step Assembly 4. Product Specifications 5. Care & Maintenance 6. Mattress Compatibility 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

All components included in the package. Verify contents before starting assembly.

Part Name	Quantity	Description/ID
Side Rail (Long)	2	High-gloss white, pre-drilled holes
Headboard	1	With integrated panel
Footboard	1	Lower profile than headboard
Center Support Beam	1	Metal, adjustable length
Slatted Bed Base (LURÖY)	1 set	Wooden slats with fabric straps
Cam Lock Bolts	8	For connecting side rails to head/footboards
Screws	16	For reinforcing joints and center beam
Plastic Caps	8	To cover cam lock bolts
Allen Key	1	Included tool

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

Assemble on a soft, clean surface to avoid scratches.
Use two people for lifting and assembly to prevent injury.
Check all connections are tight and secure before use.
Do not exceed the maximum weight limit (see Specifications).
Keep small hardware away from children during assembly.

WARNING! An improperly assembled bed frame can collapse. Inspect all connections periodically.

Step-by-Step Assembly

Estimated assembly time: 45-60 minutes. Tools needed: Allen key (provided), Phillips screwdriver (not included).

Prepare Parts: Lay out all components as shown in the manual diagram.
Attach Headboard & Footboard: Connect side rails to headboard and footboard using cam lock bolts. Hand-tighten initially.
Install Center Support Beam: Attach the metal center beam to the side rails using provided screws. Ensure it is centered.
Secure Frame: Fully tighten all cam lock bolts with the Allen key. Insert plastic caps to cover bolts.
Place Slatted Bed Base: Unroll the LURÖY slatted base onto the frame ledge. Ensure the curved side faces up.
Final Check: Gently shake the frame to ensure no movement. All parts should feel solid.

Tip: Do not overtighten bolts, as this may strip the particleboard.

Product Specifications

Model: MALM 090.226.82
Size: Queen (60" W x 80" L)
Overall Height: 12" (from floor to top of side rail)
Headboard Height: 36"
Material: Particleboard, Fiberboard, ABS plastic, Steel
Finish: High-gloss White
Max Load: 300 lbs distributed weight (excluding mattress)
Slatted Base Type: LURÖY (wood with polyester fabric)
Underbed Clearance: 5.5"
Warranty: Limited 10-year warranty (see terms)

Care & Maintenance

To maintain appearance and longevity of your MALM bed frame.

Clean with a damp cloth and mild detergent. Wipe dry immediately.
Avoid abrasive cleaners, scouring pads, or solvents.
Protect from direct sunlight and heat sources to prevent discoloration.
Tighten bolts and screws every 6 months to maintain stability.
Do not drag the frame across the floor; lift to move.

CAUTION! Do not use wax or polish on the high-gloss finish.

Mattress Compatibility

Designed for use with a standard queen-size mattress (60" x 80").

Compatible with innerspring, memory foam, latex, and hybrid mattresses.
The LURÖY slatted base provides adequate ventilation and support.
Ensure mattress thickness does not exceed 14" for proper guardrail safety.
For foam mattresses, a bunkie board or solid foundation is not required.

Note: Mattress sold separately.

Troubleshooting

Issue	Possible Cause	Solution
Frame wobbles or squeaks	Loose connections	Tighten all cam lock bolts and screws with Allen key.
Slats sliding or falling	Slats not properly seated on ledge	Re-center slatted base; ensure fabric straps are intact.
Headboard/footboard not aligned	Cam locks not fully engaged	Disassemble step, re-insert bolts, turn clockwise until "click".
Scratches on finish	Assembly on hard surface	Use a blanket during assembly. Minor scratches can be touched up with a white furniture marker.
Missing part	Package incomplete	Contact IKEA customer service with product number and receipt.

Warranty & Support

This IKEA MALM bed frame is covered by a limited 10-year warranty against manufacturing defects. Warranty does not cover damage from improper assembly, accidents, modification, or normal wear and tear.

For Support:
Visit: www.ikea.com
Customer Service: 1-888-888-4532
Have your product number (090.226.82) and receipt ready.

Recycling: Disassemble and recycle components according to local regulations. Particleboard can often be recycled as wood waste.