IKEA MAKRILLA 094.182.25 Plinth instructions manual

The IKEA MAKRILLA 094.182.25 is a kitchen plinth (kickboard) designed to conceal the space beneath base cabinets, providing a finished look while allowing ventilation. It is typically made of particleboard with a foil or melamine finish, cut to standard lengths, and can be trimmed to fit specific cabinet widths. Below are key sections for safety, features, installation, setup, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Plinth panel, mounting clips or brackets, ventilation cut-outs (if applicable), trim strips (optional).

Feature	Description
Material	Particleboard with foil/melamine finish
Standard Length	Typically 78 inches (198 cm) or as per packaging
Height	Standard plinth height (e.g., 4.5 inches/11.5 cm)
Mounting	Clips or brackets for attachment to cabinet feet or frame
Ventilation	Pre-cut holes or slots for airflow (if included)
Finish	Resistant to moisture and easy to clean
Color/Design	Matches IKEA kitchen cabinet ranges
Adjustability	Can be trimmed to width using a saw
Compatibility	Designed for IKEA SEKTION/METOD base cabinets
Packaging	Includes necessary hardware (clips, screws)

Installation

Unpack and inspect contents. Ensure cabinets are level and installed.

Measure cabinet run: Determine total width where plinth will be installed.
Trim plinth if needed: Use a fine-tooth saw to cut to required width.
Attach mounting clips: Fix clips to cabinet feet or frame at even intervals.
Install plinth: Slide plinth into clips, ensuring it is level and flush.
Secure plinth: Tighten clips or screws to hold plinth firmly.

WARNING! Use proper safety equipment (gloves, goggles) when cutting. Ensure cabinets are stable before installation.

First-Time Setup

After installation, check alignment and make adjustments.

Verify level: Use a spirit level to ensure plinth is horizontal.
Check gaps: Ensure even gap between plinth and floor for ventilation.
Adjust clips: Loosen clips to reposition plinth if necessary.
Final tightening: Secure all clips/screws once alignment is correct.
Install trim: Add optional trim strips for a finished look.

CAUTION! Do not overtighten screws to avoid damaging the plinth material.

Specifications

Product Name: MAKRILLA
Article Number: 094.182.25
Type: Plinth/Kickboard
Material: Particleboard, Foil/Melamine
Dimensions (LxH): 78 x 4.5 inches (198 x 11.5 cm) – check packaging
Weight: Approximately 2-3 kg (varies)
Color: As per IKEA range (e.g., white, black, wood effect)
Compatibility: IKEA SEKTION/METOD kitchen systems
Included Hardware: Mounting clips, screws
Warranty: Refer to IKEA warranty terms

Controls and Settings

Not applicable for plinth installation. Refer to cabinet assembly instructions for leveling feet and cabinet adjustments.

Tools Required: Saw (for trimming), screwdriver, spirit level, measuring tape, pencil.

Installation Steps: Measure, cut, attach clips, mount plinth, adjust, secure.

Connecting Devices

Not applicable for plinth installation. Plinth is a passive component.

Ensure no cables or pipes obstruct plinth area.
If ventilation is required, ensure cut-outs align with appliance intakes.
Plumb appliances (dishwasher, oven) before final plinth installation.

Tip: Plan layout to allow access to plumbing/electrical behind plinth if needed.

Playing DVD Media

Not applicable for plinth installation.

This section is not relevant to kitchen plinth installation.
Refer to appliance manuals for dishwasher, oven, or other devices.

WARNING! Do not use plinth as a support for heavy appliances.

Accessibility Features

Not applicable for plinth installation. Ensure plinth height complies with local accessibility standards if required.

Care & Cleaning

Wipe with damp cloth and mild detergent. Avoid abrasive cleaners.

CAUTION! Do not soak or use excessive water; avoid steam cleaning.

Regulatory Information

Complies with relevant furniture safety standards. Material meets low formaldehyde emissions (E1 standard). For support, visit www.ikea.com or contact local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Pinth does not fit	Incorrect measurement or cutting	Re-measure cabinet width; trim plinth carefully.
Pinth not level	Uneven floor or cabinet feet	Adjust cabinet leveling feet; reposition clips.
Clips not holding	Loose screws or incorrect placement	Tighten screws; ensure clips are attached to solid frame.
Gaps visible	Pinth not flush with cabinets	Adjust clip position; ensure plinth is pushed fully into clips.
Ventilation blocked	Cut-outs misaligned	Reposition plinth or add additional ventilation holes.

Replacement: If damaged, order new plinth (094.182.25) from IKEA.

Service: Contact IKEA customer service for missing parts or assembly help.