IKEA MÅNALG 005.057.12 Wall Lamp instructions manual

The IKEA MÅNALG 005.057.12 is a modern wall lamp designed for ambient lighting, featuring a simple installation process, energy-efficient LED light source, and a sleek design suitable for various room settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: LED light source, wall mounting bracket, power cord, installation screws, and user manual.

Safety Information

Read all instructions before installation and use.

1. Ensure power is turned off at the circuit breaker before installation.
2. Install only on a stable, dry wall surface away from moisture.
3. Do not install near heat sources or flammable materials.
4. Use only the provided screws and mounting hardware.
5. Do not disassemble the lamp or attempt to repair the LED module.

WARNING! Risk of electric shock. Installation should be performed by a qualified electrician if you are unsure. Keep out of reach of children.

Package Contents

Unpack and verify all components are present.

1. Wall lamp unit (with integrated LED)
2. Wall mounting bracket
3. Power cord with plug
4. Installation screws and wall plugs
5. User manual (this document)

CAUTION! If any parts are missing or damaged, contact IKEA customer service before proceeding.

Installation Instructions

Follow these steps for proper installation.

1. Turn off power at the circuit breaker.
2. Decide on mounting location: Ensure wall is sturdy and near a power outlet.
3. Hold mounting bracket against wall, mark screw holes with a pencil.
4. Drill holes at marked points, insert wall plugs if needed.
5. Secure mounting bracket to wall using provided screws.
6. Attach the lamp unit to the mounting bracket as per diagram.
7. Connect the power cord to the lamp terminals (if applicable) and route cord neatly.
8. Plug power cord into a grounded electrical outlet.
9. Restore power and test the lamp.

Tip: Use a level to ensure bracket is straight before drilling.

Specifications

• Model: MÅNALG 005.057.12
• Light Source: Integrated LED
• Power Consumption: [Insert wattage, e.g., 5W]
• Luminous Flux: [Insert lumens, e.g., 400 lm]
• Color Temperature: Warm white (2700K)
• Input Voltage: 100-240V AC, 50/60Hz
• Dimensions (W x H x D): [Insert dimensions, e.g., 15 x 20 x 10 cm]
• Weight: [Insert weight, e.g., 0.5 kg]
• Material: Plastic, metal
• Protection Class: IP20 (for indoor use only)
• Estimated Lifespan: 25,000 hours

Mounting and Setup

Detailed mounting guidance.

Tools Required: Drill, screwdriver, pencil, level, measuring tape.

Mounting Height: Recommended 150-170 cm from floor for optimal lighting. Ensure cord length reaches outlet without tension. Cord Management: Use cable clips to secure cord along wall if needed. Final Check: Ensure lamp is firmly attached and does not wobble.

Operation

Using the wall lamp.

1. Plug into outlet: Lamp turns on when power is supplied (if no separate switch).
2. If equipped with a switch: Use switch on cord or wall to turn on/off.
3. Light is not dimmable unless specified as dimmable model.
4. For continuous use, ensure adequate ventilation around lamp.

WARNING! Do not cover lamp or place objects directly against it during operation to prevent overheating.

Care & Maintenance

Unplug before cleaning. Use a dry, soft cloth to wipe exterior. Do not use liquids, chemicals, or abrasive cleaners.

CAUTION! LED module is not user-serviceable. Do not attempt to replace or repair. If light fails, contact IKEA for support.

Regulatory Information

Complies with relevant safety standards (e.g., IEC/EN 60598). CE marked. This product contains a light source of energy efficiency class [insert class, e.g., A++]. Disposal: Do not dispose of with household waste. Recycle according to local regulations for electronic products. For more information, contact IKEA or visit www.ikea.com.

Troubleshooting

Support: For further assistance, visit www.ikea.com or contact your local IKEA store.