IKEA MÅLERÅS 004.462.37 Ledge instructions manual

The IKEA MÅLERÅS 004.462.37 is a wall-mounted picture ledge designed for displaying photos, books, and decorative items. Made from particleboard, fiberboard, and ABS plastic, it features a clean, minimalist design suitable for various room styles. Below are key sections for safety, assembly, installation, use, care, and warranty information.

1. Product Overview 2. Included Parts 3. Tools Required 4. Safety Instructions 5. Assembly Instructions 6. Wall Installation 7. Use and Loading 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Product Overview

Key features: Wall-mounted design, concealed mounting system, smooth finish, and versatile display space.

Feature	Description
Dimensions	Length: 45 ¼" (115 cm), Depth: 3 ⅛" (8 cm), Height: 3 ⅛" (8 cm)
Material	Particleboard, Fiberboard, ABS plastic
Color/Finish	White, smooth lacquered finish
Weight Capacity	Max 11 lbs (5 kg) evenly distributed
Mounting	Wall-mounted, includes mounting hardware
Design	Minimalist, clean lines
Intended Use	Indoor use only, for displaying lightweight items

Included Parts

Check that all parts are included before starting assembly.

Ledge shelf (1 piece)
Mounting bracket (1 piece)
Wall anchors (4 pieces)
Screws (4 pieces)
Instruction manual (this document)

IMPORTANT! Do not discard any parts. Contact IKEA if any parts are missing.

Tools Required

You will need the following tools (not included):

Phillips screwdriver
Pencil
Level
Measuring tape
Drill (for hard walls)
Hammer (for wall anchors)

CAUTION! Use appropriate tools to avoid damaging the product or wall.

Safety Instructions

Read all instructions before assembly and installation.

Assemble on a soft surface to prevent scratches.
Ensure wall is suitable for mounting (avoid plasterboard without studs).
Use wall anchors provided for solid mounting.
Do not exceed the maximum weight limit.
Keep away from heat sources and direct sunlight.
Do not allow children to climb or hang on the ledge.

WARNING! Improper installation can cause the ledge to fall, resulting in injury or damage. If unsure, seek professional help.

Assembly Instructions

The ledge comes partially assembled. Follow these steps:

Place the mounting bracket on a flat surface.
Align the ledge shelf with the bracket slots.
Slide the shelf onto the bracket until it clicks into place.
Ensure the shelf is secure and does not wobble.

Tip: Do not force parts. If they do not fit easily, check alignment.

Wall Installation

Installing the ledge securely on the wall is critical.

Decide on the desired height and location.
Use a pencil to mark the screw holes using the bracket as a template.
Use a level to ensure the marks are straight.
Drill holes at the marked points (if needed for your wall type).
Insert wall anchors into the holes (tap gently with a hammer if needed).
Align the mounting bracket with the holes and secure with screws using a screwdriver.
Ensure the bracket is firmly attached to the wall.
Hang the assembled ledge onto the mounted bracket.
Test stability by applying gentle downward pressure.

CAUTION! Ensure the wall can support the weight. For plasterboard, locate and mount into studs for maximum security.

Use and Loading

Designed for displaying lightweight decorative items.

Recommended Items: Photo frames, small books, plants in lightweight pots, decorative figurines.
Max Weight: Do not exceed 11 lbs (5 kg) total. Distribute weight evenly.
Avoid: Heavy objects, liquids, items that could fall easily.
Placement: Keep items centered and away from the edge to prevent tipping.

WARNING! Overloading can cause the ledge to detach from the wall. Regularly check the mounting stability.

Care & Maintenance

To keep your ledge looking new:

Dust regularly with a soft, dry cloth.
For stains, use a damp cloth with mild soap. Wipe dry immediately.
Do not use abrasive cleaners, scouring pads, or chemical solvents.
Avoid prolonged exposure to moisture or direct sunlight to prevent warping or fading.

CAUTION! Never soak the ledge or allow liquid to pool on the surface.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Ledge is wobbly	Loose bracket or screws	Tighten all screws. Ensure wall anchors are secure.
Shelf won't click onto bracket	Misalignment or obstruction	Check alignment of slots. Remove any debris.
Wall anchors won't hold	Wrong wall type or damaged anchor	Use appropriate anchors for your wall (e.g., toggle bolts for plasterboard).
Finish is scratched	Abrasive cleaning or impact	Use gentle cleaning methods. Small scratches can be touched up with matching paint.
Items slide off	Uneven surface or overloading	Ensure ledge is level. Place items securely and avoid overloading.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details.

Support: For assembly help, missing parts, or other inquiries:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the IKEA app for digital assembly instructions.

Recycling: At end of life, disassemble and recycle materials according to local regulations.