IKEA LÖVMÅNAD 005.184.51 Work Lamp instructions manual

The IKEA LÖVMÅNAD 005.184.51 is a modern, adjustable work lamp designed for focused task lighting. It features a flexible gooseneck arm, energy-efficient LED light source with adjustable brightness, a stable weighted base, touch-sensitive controls, and a minimalist Scandinavian design. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Package Contents & Specifications 2. Safety Information 3. Assembly Instructions 4. Operation & Controls 5. Positioning & Adjustment 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Package Contents & Specifications

Before assembly, verify all parts are present.

Component	Quantity	Description
Weighted Base	1	Provides stability
Gooseneck Arm	1	Flexible, adjustable arm
Lamp Head with LED	1	Integrated, non-replaceable LED module
Power Adapter	1	Input: 100-240V AC, Output: 12V DC
Mounting Hardware	1 set	Screws (if applicable for base attachment)
Instruction Manual	1	This document

Light Source: Integrated LED, 4000K (cool white), 600 lumens.
Dimmable: Yes, via touch control.
Power Consumption: 7W max.
Input: 12V DC.
Arm Reach: Up to 50 cm (20 inches).
Base Diameter: 15 cm (6 inches).

Safety Information

WARNING! To reduce the risk of fire, electric shock, or injury:

Read all instructions before assembly and use.
This lamp is for indoor use only.
Use only the provided 12V DC power adapter. Do not use with other adapters.
Do not place the lamp near water or in damp locations.
Do not cover the lamp or place materials over it during operation.
Unplug the lamp before cleaning or when not in use for extended periods.
Do not attempt to disassemble or replace the integrated LED light source.
Keep out of reach of children.
Ensure the lamp is placed on a stable, level surface.

CAUTION! The gooseneck arm is flexible but do not bend it forcefully beyond its natural range.

Assembly Instructions

Assembly requires no tools. Follow these steps:

Prepare the Base: Place the weighted base on your desired work surface (desk, table).
Attach the Gooseneck Arm: Insert the threaded end of the gooseneck arm into the socket on the base. Turn clockwise until hand-tight. Do not over-tighten.
Attach the Lamp Head: Screw the lamp head onto the top of the gooseneck arm. Turn clockwise until snug.
Connect Power: Plug the DC connector from the power adapter into the port on the base or lower section of the arm. Plug the AC adapter into a standard wall outlet.

Tip: Ensure all connections are secure before plugging in.

Operation & Controls

The lamp features a touch-sensitive control panel, usually located on the base or the lamp head.

Control Action	Function
Single Touch	Turns the lamp ON/OFF.
Touch and Hold	Adjusts brightness (increases while holding, decreases on second hold, or cycles).
Double Touch (if available)	Cycles through color temperature modes (e.g., Warm White, Cool White).

To Turn On: Briefly touch the control area. The lamp will turn on at the last brightness setting.
To Adjust Brightness: Touch and hold the control area. Release at your desired brightness level. Some models may require you to touch and hold again to decrease.
To Turn Off: Briefly touch the control area again.

Note: The lamp may have a memory function that recalls the last brightness setting.

Positioning & Adjustment

The flexible gooseneck arm allows for precise light placement.

Directing the Light: Gently bend the gooseneck arm to position the lamp head. Aim the light directly at your work area (e.g., keyboard, book, craft project).
Avoiding Glare: Position the lamp so the light source is not directly visible to your eyes. It should illuminate the task, not shine into your face.
Optimal Distance: For reading, position the lamp head 30-40 cm (12-16 inches) from the page.
Stable Base: The weighted base is designed to stay in place. Ensure the surface is clean and dry for maximum grip.

Tip: For even lighting, combine the task lamp with ambient room lighting.

Care & Maintenance

Unplug the lamp from the wall outlet before cleaning.

Cleaning the Exterior: Wipe the base, arm, and lamp head with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
Cleaning the LED Lens: Use a soft, dry cloth to gently dust the light-emitting surface.
Storage: If storing, loosely coil the gooseneck arm. Store in a cool, dry place.

CAUTION! Never immerse any part of the lamp in water or other liquids. Do not use the lamp if the cord or adapter is damaged.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage / Faulty outlet	Ensure power adapter is firmly plugged into lamp and wall outlet. Try a different outlet.
Light is dim or flickering	Loose connection / Adapter issue	Check all connections (adapter to lamp, adapter to wall). Ensure you are using the correct IKEA adapter.
Touch controls are unresponsive	Dirty control surface / Static electricity	Wipe the control area with a dry cloth. Touch with dry fingers. Unplug for 1 minute, then reconnect.
Lamp becomes warm	Normal operation	Some warmth is normal, especially at high brightness. Ensure vents (if any) are not blocked.
Lamp is unstable	Base not on level surface / Arm over-extended	Place on a flat, stable surface. Reposition the arm to better balance the weight.

Reset: Unplug the lamp from the wall for 60 seconds, then plug it back in.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at IKEA stores and www.IKEA.com.

Recycling: Do not dispose of this product with household waste. At the end of its life, recycle it according to local regulations for electronic equipment.

For Support:
Visit: www.IKEA.com
Contact your local IKEA store.
Have the product name (LÖVMÅNAD) and article number (005.184.51) ready.