IKEA LÅGTRYCK 905.132.08 Floor Lamp instructions manual

The IKEA LÅGTRYCK 905.132.08 is a modern floor lamp featuring a minimalist design with adjustable height and angle, energy-efficient LED light source, touch-sensitive dimmer control, stable weighted base, and a sleek metal and plastic construction. It provides ambient lighting suitable for living rooms, bedrooms, or reading corners. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Operation & Controls 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Adjustable lamp head, telescopic pole, weighted circular base, integrated touch dimmer, and energy-saving LED module.

Feature	Description
Adjustable Height	Telescopic pole allows height adjustment from 100cm to 150cm
Adjustable Head	Lamp head swivels 180° horizontally and 90° vertically
Touch Dimmer	Touch-sensitive control on the pole for on/off and dimming (3 levels)
LED Light Source	Integrated, non-replaceable LED (3000K warm white, 800 lumens)
Weighted Base	Provides stability to prevent tipping
Power Supply	Internal driver; plugs into standard 120V AC outlet
Materials	Metal pole and base, plastic shade and joints

Package Contents

Unpack and verify all parts are present before assembly.

Lamp base (weighted)
Telescopic pole (2 sections)
Lamp head with integrated LED
Plastic shade
Mounting screws and hex key
Instruction manual

NOTE: If any part is missing or damaged, contact IKEA customer service. Do not attempt assembly.

Safety Instructions

Read all instructions before assembly and use.

Use only with 120V AC, 60Hz power source.
Do not disassemble or modify the lamp.
Keep away from water and damp areas.
Do not place near heat sources or flammable materials.
Ensure the lamp is on a stable, level surface.
This lamp contains non-replaceable LED light source. Do not attempt to replace.
Unplug before cleaning or moving.

WARNING! Risk of electric shock. Do not use if cord or plug is damaged.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools required: Hex key (provided).

Attach Pole to Base: Insert the lower pole section into the base socket. Secure with the provided screw using the hex key.
Extend Pole: Loosen the locking collar on the lower pole. Pull the upper pole section to desired height. Tighten the locking collar.
Attach Lamp Head: Connect the lamp head to the top of the pole. Align the connectors and secure with the screw.
Attach Shade: Slide the plastic shade over the lamp head until it clicks into place.
Route Power Cord: Run the power cord along the pole and out from the base. Plug into wall outlet.

CAUTION! Do not overtighten screws. Ensure all connections are secure before use.

Operation & Controls

Touch-sensitive control located on the pole, approximately 30cm from the base.

Turn On/Off: Single brief touch.
Dimming: Touch and hold to cycle through brightness levels (Low → Medium → High → Low).
Adjustment: Loosen the joint screws to position the lamp head. Tighten to lock in place.
Height Adjustment: Loosen the locking collar, adjust height, re-tighten.

Tip: The lamp remembers the last brightness setting when turned off and on.

Specifications

Model: LÅGTRYCK 905.132.08
Light Source: Integrated LED, 3000K (warm white)
Luminous Flux: 800 lumens
Power Consumption: 10W
Dimming: 3 levels (100%, 60%, 30%)
Height Range: 100cm - 150cm (adjustable)
Base Diameter: 30cm
Weight: 3.5 kg
Input Voltage: 120V AC, 60Hz
Materials: Steel, ABS plastic
Color: Black/White (as per variant)

Care & Maintenance

Unplug lamp before cleaning.

Use a soft, dry cloth to wipe the pole, base, and shade.
For stubborn marks, use a damp cloth with mild soap. Do not use abrasive cleaners.
Ensure no liquid enters the lamp head or joints.
Check and tighten screws periodically to maintain stability.

CAUTION! Do not immerse in water. Do not use solvents or harsh chemicals.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power	Check if plugged in; test outlet with another device.
Touch control unresponsive	Dirty surface/power issue	Clean touch area with dry cloth; unplug for 30 seconds, then reconnect.
Lamp flickers	Loose connection	Check all assembly connections; ensure plug is fully inserted.
Lamp unstable	Base not level/screws loose	Place on level surface; tighten all screws and locking collar.
Light output dim	On lowest dimming setting	Touch and hold to increase brightness.

Note: The LED light source has an estimated lifespan of 25,000 hours and is not user-replaceable.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

For assembly assistance, spare parts, or product support:

Visit: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532
Visit your local IKEA store.

Disposal: Dispose of in accordance with local electronic waste regulations. Do not dispose with household waste.