IKEA LÄCKÖ 092.690.27 Table instructions manual

The IKEA LÄCKÖ 092.690.27 is a versatile table designed for assembly and use in various settings. This manual provides essential information for safety, assembly, setup, care, and troubleshooting. Please read all instructions carefully before beginning assembly.

1. Safety Information 2. Parts & Tools Included 3. Assembly Instructions 4. Setup & Placement 5. Specifications 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Safety Information

Important safety guidelines to ensure proper and safe use of your LÄCKÖ table.

Warning	Description
Weight Capacity	Do not exceed the maximum load of 50 kg (110 lbs).
Assembly Surface	Assemble on a soft, clean surface to avoid scratching parts.
Tool Use	Use only the provided Allen key; do not over-tighten screws.
Stability	Ensure all legs are firmly attached and the table is level before use.
Children	Do not allow children to climb on or hang from the table.

WARNING! Failure to follow safety instructions may result in injury or damage to the product.

Parts & Tools Included

Check that all listed parts are present before starting assembly.

Tabletop: 1 piece, particleboard with melamine foil.
Legs: 4 pieces, steel with epoxy/polyester powder coating.
Mounting Plates: 4 pieces, pre-attached to tabletop underside.
Screws: 16 pieces (M6 x 16 mm).
Allen Key: 1 piece, 4 mm.
Instruction Manual: This document.

Tip: Lay out all parts and compare with the illustrations in the manual.

Assembly Instructions

Follow these steps in order for correct assembly. Estimated time: 15-20 minutes.

Prepare Workspace: Clear an area large enough for the tabletop.
Attach Legs: Turn tabletop upside down on a soft surface. Align a leg with a mounting plate.
Insert Screws: Using the Allen key, insert and tighten the four screws into the pre-drilled holes on the leg bracket. Do not fully tighten yet.
Repeat: Attach the remaining three legs in the same manner.
Final Tightening: Once all legs are attached, go back and fully tighten all screws securely.
Upright Position: Carefully turn the table right-side up.

CAUTION! Do not overtighten screws, as this may strip the threads in the particleboard.

Setup & Placement

Location: Choose a flat, stable surface. Avoid direct sunlight and heat sources.
Leveling: Check that the table does not wobble. If it does, adjust by placing a shim under the shorter leg or tightening connections.
Usage: Suitable for dining, working, or as a side table. Distribute weight evenly.

Tip: Use felt pads under the legs on hardwood or tile floors to prevent scratches and reduce noise.

Specifications

Article Number: 092.690.27
Design: LÄCKÖ series
Dimensions (LxWxH): 100 cm x 60 cm x 74 cm (39 3/8" x 23 5/8" x 29 1/8")
Tabletop Thickness: 2.8 cm (1 1/8")
Material: Tabletop: Particleboard, Melamine foil. Legs: Steel, Epoxy/polyester powder coating.
Color: White
Max Load: 50 kg (110 lbs)
Packaging Weight: Approx. 15 kg (33 lbs)

Care & Maintenance

Proper care will extend the life and appearance of your table.

Cleaning: Wipe with a damp cloth and mild detergent. Dry immediately.
Stains: For stubborn stains, use a mild soap solution. Do not use abrasive cleaners, scouring pads, or solvents.
Protection: Use coasters under glasses and hot pads under hot dishes to prevent marks and heat damage.
Inspection: Periodically check and tighten screws if the table becomes loose.

CAUTION! Never soak the tabletop or allow liquids to pool, as moisture can damage the particleboard core.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table wobbles	Uneven floor or loose legs	Check floor level. Tighten all leg screws securely. Use shim if necessary.
Screw won't tighten	Threads stripped	Do not force. Remove screw, insert a wooden toothpick into the hole, then reinsert and tighten the screw.
Scratches on surface	Abrasive cleaning or sharp objects	Use touch-up markers (available at IKEA) for minor scratches. Prevent future scratches with pads/coasters.
Stain on tabletop	Liquid spill not cleaned promptly	Clean with mild soap and water. For persistent stains, a paste of baking soda and water may help. Test in an inconspicuous area first.
Leg feels loose	Screws not fully tightened	Re-tighten all screws for that leg using the Allen key. Ensure the leg is correctly aligned with the mounting plate.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores for full terms and conditions.

Replacement Parts: For missing or damaged parts, contact your local IKEA store or visit the IKEA website with your article number (092.690.27).

Customer Support: Visit www.ikea.com for assembly guides, product information, and contact details for your region.

Disposal: At end of life, disassemble and dispose of materials according to local recycling regulations. Wood and metal components are often recyclable.