IKEA LOMMARP 305.085.25 Bookcase instructions manual

The IKEA LOMMARP 305.085.25 is a classic bookcase with a timeless design, featuring adjustable shelves, sturdy construction, and a finish that complements various interior styles. This manual provides essential information for safe assembly, proper use, care, and troubleshooting of your bookcase. Below are key sections covering safety, parts identification, assembly steps, usage guidelines, and maintenance.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Adjusting Shelves 6. Care & Maintenance 7. Weight Limits & Placement 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Side panels, top/bottom panels, back panel, shelves, shelf supports, screws, cam locks, dowels, wall attachment device.

Part Description	Quantity	Identification Code
Side panel (left)	1	A
Side panel (right)	1	B
Top panel	1	C
Bottom panel	1	D
Back panel (fiberboard)	1	E
Adjustable shelves	4	F
Shelf support pins	16	G
Cam lock screws	8	H
Cam locks	8	I
Wooden dowels	8	J
Wall attachment bracket	1 set	K

Safety Information

Read all instructions before assembly. Ensure a safe environment.

Assembly requires two people due to size and weight.
Keep small parts away from children to prevent choking.
Assemble on a soft surface (e.g., carpet) to avoid scratching panels.
Use only provided IKEA hardware; substitutions may compromise stability.

WARNING! To prevent tip-over accidents that can result in serious injury or death, this bookcase MUST be securely anchored to the wall using the provided wall attachment device.

Assembly Instructions

Follow steps in order. Use the included Allen key for cam locks.

Prepare: Unpack all parts. Identify using codes above. Lay panels flat.
Connect side and top/bottom panels: Insert dowels (J) into side panels (A, B). Attach top (C) and bottom (D) panels, aligning dowel holes. Tighten cam locks (I) using screws (H).
Install back panel: Place bookcase face down on soft surface. Position back panel (E) into grooves. Secure with provided nails or screws into pre-drilled holes.
Install shelf supports: Insert shelf support pins (G) into desired holes on side panels for adjustable shelf positions.
Attach shelves: Place shelves (F) onto support pins.
Secure to wall: Locate wall studs. Attach bracket (K) to wall, then to top rear of bookcase as per diagram. Ensure bookcase is level and secure.

CAUTION! Do not stand or climb on the bookcase. Do not overtighten screws.

Specifications

Model: LOMMARP
Article Number: 305.085.25
Dimensions (W x H x D): 31 ½" x 77 ½" x 15 ¾" (80cm x 197cm x 40cm)
Material: Particleboard, Fiberboard, Foil, Plastic edging
Color: Black-Brown
Weight: Approximately 88 lbs (40 kg) assembled
Max Load per Shelf: 33 lbs (15 kg) evenly distributed
Adjustable Shelves: Yes, multiple height positions
Wall Attachment: Required, hardware included

Adjusting Shelves

Shelves can be repositioned to accommodate items of different heights.

Remove all items from the shelf and the shelf above it.
Lift shelf slightly and pull forward to disengage from support pins.
Remove shelf support pins from current holes using pliers if necessary.
Insert pins into desired holes on side panels (ensure same height on both sides).
Place shelf onto new pins, ensuring it is level and fully seated.

Tip: For stability, always use at least four support pins per shelf.

Care & Maintenance

Clean with a damp cloth wrung out in mild soapy water. Wipe dry immediately.

Daily Cleaning: Dust with a soft, dry cloth.
Stain Removal: Use a mild detergent. Do not use abrasive cleaners, scouring pads, or solvents.
Protection: Avoid prolonged exposure to direct sunlight, high humidity, or heat sources.
Check Tightness: Periodically check and tighten cam locks and wall attachment.

CAUTION! Never soak or pour liquids directly onto surfaces. Do not use wax or polish.

Weight Limits & Placement

Proper loading and placement ensure longevity and safety.

Place heaviest items on lower shelves.
Distribute weight evenly across each shelf. Do not exceed 33 lbs (15 kg) per shelf.
Place bookcase on a level, solid floor. Do not place on uneven or soft flooring that may cause instability.
Ensure wall attachment is secured into solid wall material (e.g., wood studs, masonry).

WARNING! Overloading shelves or improper placement can cause bookcase to tip over or shelves to collapse.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bookcase wobbles	Uneven floor; loose connections; wall bracket not installed	Check floor level; tighten all cam locks and screws; ensure wall attachment is properly installed and tight.
Shelf sags or bows	Weight limit exceeded	Remove items immediately. Redistribute weight to lower shelves or use multiple bookcases. Do not use damaged shelf.
Cam lock won't tighten	Dowel misaligned; cross-threaded screw	Disassemble step. Ensure dowel is fully inserted into receiving hole. Start screw by hand before tightening with tool.
Back panel loose	Nails/screws not fully seated	Carefully push panel into groove and secure with additional fasteners if needed.
Scratches on surface	Assembly on hard surface; abrasive cleaning	Assemble on carpet or blanket. For minor scratches, use a matching furniture touch-up pen.

Warranty & Support

IKEA Limited Warranty: Refer to the IKEA warranty leaflet included in packaging for full terms. Generally covers material and manufacturing defects.

Missing Parts? Contact IKEA customer service with article number (305.085.25) for replacement parts.

Assembly Help: Visit the IKEA website for assembly video tutorials.

Contact: IKEA Customer Support: 1-800-434-4532 (IKEA) or visit www.ikea.com.