IKEA LJUSTER 402.687.56 LED Light instructions manual

The IKEA LJUSTER 402.687.56 is a modern LED light fixture designed for indoor use, featuring energy-efficient LED technology, adjustable brightness, and a sleek Scandinavian design. It includes a wall mount, power adapter, and remote control for convenient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Remote Control 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel, Remote Control, Wall mount bracket, Power adapter, Mounting screws.

Feature	Description
LED Panel	Energy-efficient, long-lasting LED light source
Remote Control	For wireless operation of brightness and on/off
Wall Mount Bracket	For secure mounting on walls
Power Adapter	Converts AC power to DC for LED operation
Brightness Adjustment	Multiple brightness levels (e.g., 25%, 50%, 75%, 100%)
Design	Sleek, minimalist Scandinavian design
Power Button	Turns light on/off manually
Mounting Holes	Pre-drilled holes for easy installation
Input Port	For connecting power adapter
Indicator Light	Shows power status

Installation

Unpack and inspect contents. Ensure you have a drill, screwdriver, and level.

Choose location: Select a wall area near a power outlet, away from moisture.
Mark mounting points: Use bracket as template to mark screw holes on wall.
Drill holes: Drill holes for wall plugs (if needed).
Attach bracket: Secure bracket to wall using provided screws.
Mount light: Hang LED panel onto bracket, ensuring it clicks into place.
Connect power: Plug adapter into light's input port, then into wall outlet.

WARNING! Ensure power is off during installation. Use appropriate wall anchors for your wall type.

First-Time Setup

After installation, power on the light and pair remote control.

Power on: Plug adapter into outlet; light should turn on at default brightness.
Pair remote: Point remote at light, press and hold POWER button for 3 seconds until light blinks.
Test functions: Use remote to adjust brightness and turn light on/off.
Adjust angle: Tilt light panel to desired direction (if adjustable).

CAUTION! Do not touch LED panel with wet hands. Ensure mounting is secure.

Specifications

Model: LJUSTER 402.687.56
Light Source: LED, non-replaceable
Power Consumption: 15W
Brightness: Adjustable, equivalent to 1200 lumens max
Color Temperature: 3000K (Warm White)
Input Voltage: 100-240V AC, 50/60Hz
Output: 12V DC via adapter
Dimensions: 40cm x 20cm x 5cm (approx.)
Weight: 1.5 kg
Operating Temp: 0°C to 40°C

Controls and Settings

Manual control via power button on light. Remote control: POWER, Brightness +/-, Timer.

Remote Functions: POWER (on/off), Brightness + (increase), Brightness - (decrease), Timer (set auto-off: 30 min, 60 min, 90 min).

Brightness Levels: 25%, 50%, 75%, 100% (cycle through with Brightness +). Timer: Press TIMER to select duration; light turns off automatically. Reset: Unplug power for 10 seconds to reset to factory settings.

Connecting to Power

Use only provided power adapter.

Ensure light is off before connecting.
Plug adapter into light's DC input port.
Plug adapter into wall outlet (100-240V AC).
Turn on via power button or remote.

Tip: Use a surge protector for added safety. Do not use damaged cords.

Using the Remote Control

Remote operates up to 5 meters away.

Point remote directly at light's front panel.
Press POWER to turn on/off.
Press Brightness + or - to adjust light level.
Press TIMER to set auto-off (30/60/90 min); press again to cancel.
If unresponsive, replace batteries (2x AAA).

WARNING! Keep remote away from water. Dispose of batteries properly.

Maintenance

Unplug before cleaning. Wipe with dry, soft cloth; do not use chemicals.

CAUTION! Do not disassemble LED panel. No user-serviceable parts inside.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power connection	Check if adapter is plugged in; try different outlet.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to light.
Dim light	Brightness setting	Press Brightness + to increase level.
Flickering	Loose connection	Ensure adapter is fully plugged into light and outlet.
Overheating	Ventilation	Ensure light has space around it; do not cover.

Reset: Unplug power for 10 seconds, then reconnect.

Service: Contact IKEA customer service or visit www.ikea.com.