IKEA LISABO 702.976.58 Table instructions manual

The IKEA LISABO 702.976.58 is a modern, lightweight table featuring a durable ash veneer tabletop and powder-coated steel legs. Designed for easy assembly with a minimalistic aesthetic, it is suitable for dining, working, or as a side table. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Assembly Instructions 4. Safety & Warnings 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part NameQuantityDescription
Tabletop1Ash veneer, rectangular shape
Legs4Powder-coated steel, black finish
Mounting brackets4Steel, pre-attached to tabletop underside
Leg screws8Hex head, included with washers
Allen key1For tightening leg screws
Protective pads4Self-adhesive, for leg bottoms

Tools Required

Only the included Allen key is needed for assembly.

Note: Do not use power tools, as overtightening may damage the threads.

Assembly Instructions

Assemble on a soft, clean surface to avoid scratches. Estimated time: 15-20 minutes.

  1. Prepare the tabletop: Place it upside down on a padded surface (e.g., carpet or blanket).
  2. Attach the legs: Align each leg with its corresponding mounting bracket under the tabletop.
  3. Insert screws: Hand-tighten two screws per leg using the Allen key. Do not fully tighten yet.
  4. Check alignment: Ensure all legs are perpendicular to the tabletop.
  5. Final tightening: Fully tighten all screws securely with the Allen key.
  6. Attach protective pads: Peel and stick one pad to the bottom of each leg.
  7. Flip the table: Carefully turn the table right-side up.

Tip: For stability, ensure all screws are tightened evenly.

Safety & Warnings

Follow these precautions to ensure safe assembly and use.

WARNING! Overtightening screws may strip the threads or damage the veneer.

Care & Maintenance

Proper care will extend the life and appearance of your table.

  1. Cleaning: Wipe the tabletop with a damp, soft cloth. Dry immediately. Do not use abrasive cleaners, solvents, or steel wool.
  2. Protection: Use coasters under glasses and placemats under hot dishes to prevent marks and heat damage.
  3. Legs: Dust with a dry cloth. If needed, clean with mild soapy water and dry thoroughly.
  4. Scratches: Minor scratches on the veneer can be concealed with a matching wood touch-up pen (available separately).

CAUTION! Never soak the table or allow liquids to pool on the surface.

Specifications

Troubleshooting

IssuePossible CauseSolution
Table wobblesUneven floor; loose legsCheck floor level; tighten all leg screws securely.
Legs difficult to attachMisaligned bracketEnsure leg is fully seated in bracket before tightening screws.
Scratches on surfaceImproper handlingAssemble on soft surface; use protective pads under objects.
Missing hardwarePackaging errorContact IKEA customer service for replacement parts.
Stains on veneerLiquid spillWipe immediately with damp cloth; avoid harsh chemicals.

Note: If parts are damaged, do not attempt assembly. Contact IKEA for assistance.

Warranty & Support

This product is covered by IKEA’s limited warranty. Refer to the IKEA warranty leaflet included in the package for full terms and conditions.

Recycling: Dispose of packaging materials responsibly. Check local recycling guidelines.

IKEA LISABO 702.976.58 Table instructions manual © - All Rights Reserved 2025