IKEA LINDVED 004.338.95 Side Table instructions manual

The IKEA LINDVED 004.338.95 is a compact and stylish side table designed for assembly at home. It features a clean, modern design with a white finish, suitable for use as a bedside table, living room accent piece, or small storage surface. This manual provides step-by-step assembly instructions, safety warnings, care guidelines, and product specifications to ensure proper setup and long-lasting use.

1. Parts & Hardware Included 2. Safety Information 3. Tools Required 4. Step-by-Step Assembly 5. Product Specifications 6. Care & Maintenance 7. Warranty & Support 8. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part Name	Quantity	Description/Part Number
Table Top	1	White, particleboard with melamine foil
Table Legs	4	White, steel
Metal Frame	1	Connects legs to table top
Wooden Dowels	4	8mm diameter
Cam Lock Nuts	4	Includes screws
Protective Felt Pads	4	For leg bottoms
Assembly Instructions	1	This manual

Safety Information

Read all instructions before beginning assembly. Keep children and pets away from assembly area.

Work on a soft surface: Use a carpet or blanket to prevent scratching parts.
Check parts: Ensure no parts are damaged or missing. Do not use damaged parts.
Tighten securely: Ensure all screws and connections are firm but do not overtighten.
Weight limit: Do not exceed the maximum load capacity of 25 kg (55 lbs).

WARNING! Assembly requires two people for safety and stability. Furniture can tip over if not properly assembled or if overloaded. Secure to wall if possible, especially in households with children.

Tools Required

No specialized tools are needed. All necessary hardware is included.

Supplied Allen key (included in hardware pack).
Supplied screwdriver (if included) or a standard Phillips-head screwdriver.
A soft mallet or hammer (optional, for tapping dowels).

Tip: Keep tools and small parts in the packaging until needed to avoid loss.

Step-by-Step Assembly

Follow these steps in order. Refer to the included pictorial guide for visual reference.

Attach legs to frame: Insert the four legs into the corners of the metal frame. Secure each leg with the provided screws using the Allen key. Ensure legs are straight and fully inserted.
Prepare table top: Place the table top upside down on a soft, protected surface. Locate the pre-drilled holes for the frame attachment.
Insert wooden dowels: Gently tap the four wooden dowels into the designated holes on the underside of the table top using a soft mallet or by hand.
Connect frame to top: With help from a second person, align the metal frame (with legs attached) over the dowels on the table top. Lower the frame so the dowels slide into the corresponding holes on the frame.
Secure with cam locks: Under the table top, locate the four cam lock nuts. Insert each screw through the frame into the cam lock. Turn each cam lock 90 degrees clockwise with the Allen key until tight. Ensure all four are securely fastened.
Attach felt pads: Peel the backing from the four felt pads and stick one to the bottom of each leg to protect your floor.
Final check: Turn the table upright. Check stability by gently rocking it. Tighten any loose connections if necessary.

CAUTION! Do not stand or sit on the table. It is not designed to support human weight.

Product Specifications

Product Name: LINDVED
Article Number: 004.338.95
Color: White
Dimensions (Assembled): Width: 55 cm, Depth: 55 cm, Height: 45 cm (approx. 21.7" W x 21.7" D x 17.7" H).
Weight: 7.5 kg (approx. 16.5 lbs).
Max Load: 25 kg (55 lbs) evenly distributed on the table top.
Materials: Particleboard, Fiberboard, ABS plastic, Steel.
Surface: Melamine foil, Powder coating.
Designer: IKEA of Sweden

Care & Maintenance

Proper care will extend the life and appearance of your side table.

Cleaning: Wipe with a damp cloth and a mild detergent. Dry immediately with a soft, clean cloth.
Stains: For stubborn stains, use a mild kitchen cleaner. Never use abrasive cleaners, scouring pads, or solvents.
Protection: Use coasters under glasses and cups to prevent rings and heat marks.
Inspection: Periodically check and tighten screws and cam locks to maintain stability.

CAUTION! Do not place near direct heat sources (radiators, stoves) or in damp areas for extended periods. Avoid prolonged exposure to direct sunlight to prevent fading.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the "Important Information" booklet for full details.

For assembly help, missing parts, or other support:

Visit the IKEA website: www.ikea.com
Contact your local IKEA store.
Use the IKEA Store App for digital assembly instructions.

Note: Keep your receipt as proof of purchase for warranty claims.

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor; Loose connections	Check floor level. Turn table over and tighten all screws and cam locks securely.
Legs won't attach	Misaligned holes	Ensure you are using the correct holes. The frame and legs are keyed; align them properly before inserting screws.
Cam lock won't turn	Misaligned screw	Loosen the screw slightly, ensure the cam lock is in the open position (arrow pointing at screw hole), re-insert screw, then turn cam lock to lock.
Parts missing	Packaging error	Contact your nearest IKEA store or the IKEA customer service hotline with your article number (004.338.95) for replacement parts.
Surface stain	Liquid spill	Clean immediately as per Care instructions. For set-in stains, a mild paste of baking soda and water may help. Test on an inconspicuous area first.

Recycling: At end of life, disassemble and recycle materials according to local regulations. Wood components can often be recycled, metal can be scrapped.

IKEA Customer Service: Find contact details for your country on www.ikea.com.