IKEA LINDÅSEN 105.158.00 Shelf instructions manual

The IKEA LINDÅSEN 105.158.00 is a versatile wall-mounted shelf system designed for storage and display. It features a clean Scandinavian design, sturdy construction, multiple mounting options, and adjustable components for flexible use in various rooms. Below are key sections for safety, parts list, assembly, installation, use, care, and troubleshooting.

Parts & Tools Checklist

Before assembly, verify all parts are included. Key components: Shelf boards, Brackets, Mounting rails, Screws, Wall plugs, Allen key.

Tools needed: Phillips screwdriver, drill, level, pencil, measuring tape.

Safety Instructions

Read all instructions before assembly and installation.

1. Use two people for assembly and mounting to prevent injury.
2. Ensure wall structure can support shelf weight (see weight limits).
3. Mount only to solid walls (wood studs, concrete, brick). Avoid drywall alone.
4. Keep small parts away from children to avoid choking hazard.
5. Do not climb or stand on the shelf.

WARNING! Incorrect installation can cause shelf to fall, resulting in injury or damage. Use appropriate wall anchors and verify wall type.

Assembly Steps

Assemble shelf components before wall mounting.

1. Attach brackets to shelves: Align bracket (C) with pre-drilled holes on underside of shelf board (A). Secure with short screws (F) using Allen key.
2. Repeat for all shelf boards (A and B).
3. Attach mounting rails to brackets: Slide bracket into rail (D) and tighten set screw with Allen key.
4. Check all connections are tight and brackets are perpendicular to shelves.

Tip: Do not fully tighten screws until all parts are aligned.

Wall Installation

Mount assembled shelf unit to wall securely.

1. Locate studs: Use stud finder to locate wood studs or mark solid wall areas.
2. Mark positions: Hold rail against wall, use level to ensure horizontal. Mark screw holes with pencil.
3. Drill holes: Drill pilot holes at marks using drill bit size recommended for wall plugs.
4. Insert wall plugs: Tap plastic plugs (G) into holes until flush with wall.
5. Mount rails: Align rail holes with wall plugs, insert long screws (E) and tighten with screwdriver.
6. Attach shelf unit: Hang assembled shelf brackets onto mounted rails. Ensure locking mechanism engages.
7. Final check: Test stability by applying gentle downward pressure. Re-tighten if needed.

CAUTION! If drilling into tile, use appropriate bit to avoid cracking. Check for hidden wires/pipes before drilling.

Adjusting & Configuring

Shelf height and layout can be adjusted.

• Height adjustment: Loosen set screws on brackets, slide shelf up/down on rail, re-tighten.
• Horizontal spacing: Brackets can be moved along rail before final tightening.
• Orientation: Shelves can be mounted horizontally or vertically depending on rail orientation.
• Multiple units: Rails can be extended or multiple units combined side-by-side.

Use level after any adjustment to ensure shelves are even.

Weight Limits & Use

Adhere to maximum load capacities for safe use.

Do not place: Heavy appliances, aquariums, or excessive weight on one side. Avoid placing near heat sources or in damp areas unless treated for moisture.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

1. Dust regularly with soft, dry cloth.
2. For stains, use mild soap solution and damp cloth, then dry immediately.
3. Do not use abrasive cleaners, scouring pads, or solvents.
4. Check tightness of screws and brackets every 6 months.

CAUTION! Excessive moisture can damage finish. Do not soak or steam clean.

Disassembly & Moving

To disassemble for moving or reconfiguration:

1. Remove items from shelves.
2. Unscrew shelf brackets from rails by loosening set screws.
3. Remove rails from wall by unscrewing long screws.
4. Fill wall holes with appropriate filler if not reusing.
5. Pack parts in original packaging if available.

Label parts during disassembly for easier reassembly.

Warranty Information

IKEA limited warranty: 10 years from date of purchase. Covers manufacturing defects in materials and workmanship under normal household use. Does not cover damage from improper assembly, installation, misuse, or accidents. Proof of purchase required. For warranty claims, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

Need help? Visit IKEA assembly support online or call 1-888-888-4532.