IKEA LIATORP 801.166.00 TV Stand instructions manual

The IKEA LIATORP 801.166.00 is a classic TV stand with a timeless design, featuring a sturdy construction, glass doors, and ample storage space. It is designed to support TVs up to a specified weight and size, providing a stable and stylish base for your entertainment setup. Below are key sections for safety, assembly, installation, care, and troubleshooting.

1. Safety Information 2. Package Contents & Tools Needed 3. Assembly Instructions 4. Installation & Placement 5. Specifications 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Safety Information

Read all instructions before assembly and use. Keep for future reference.

Warning	Description
Weight Limit	Do not exceed the maximum TV weight specified in the manual.
Stability Risk	To prevent tip-over, secure the TV stand to the wall using the provided anti-tip device.
Assembly Surface	Assemble on a soft, clean surface to avoid scratching parts.
Glass Components	Handle glass doors with care; avoid impacts and do not overtighten screws.
Children Safety	Do not let children climb or hang on the unit.

Package Contents & Tools Needed

Unpack all parts and check against the list. Contact IKEA if any parts are missing.

Main Components: Side panels (2), Top panel (1), Bottom shelf (1), Back panel (1), Glass doors (2), Door hinges, Handles, Drawer fronts, Drawer runners.
Hardware Pack: Screws, Cam locks, Dowels, Wall attachment device.
Tools Needed: Phillips screwdriver, Hammer (for dowels), Measuring tape, Level.

IMPORTANT! Do not discard packaging until assembly is complete and verified.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until the structure is aligned.

Frame Assembly: Connect side panels to the bottom shelf using cam locks and dowels. Attach the back panel for stability.
Top Panel: Secure the top panel to the side panels with provided screws.
Drawer Installation: Attach drawer runners to the inner sides. Slide in drawer boxes and attach fronts.
Door Installation: Mount hinges to the side panels. Attach glass doors and adjust for alignment. Install handles.
Final Check: Ensure all screws are tightened. Check that doors and drawers open smoothly.

CAUTION! Use two people for lifting and positioning larger panels.

Installation & Placement

Location: Place on a flat, level floor away from direct sunlight and heat sources.
Wall Attachment: MUST secure the TV stand to the wall using the included anti-tip bracket to prevent tipping.
TV Mounting: Ensure your TV's weight and VESA pattern are compatible. Center the TV on the stand.
Cable Management: Use the openings in the back panel to route cables neatly.

Tip: Leave adequate space behind the unit for ventilation and cable access.

Specifications

Model: LIATORP 801.166.00
Color/Finish: Black-Brown/Glass
Dimensions (W x H x D): Approx. 47 ¼ x 19 ¼ x 18 ⅞ inches (120 x 49 x 48 cm)
Max. TV Weight: 110 lbs (50 kg)
Max. TV Size: Recommended for TVs up to 65 inches
Material: Particleboard, Fiberboard, Acrylic paint, Tempered glass
Weight (empty): Approx. 88 lbs (40 kg)

Care & Maintenance

Clean regularly to maintain appearance and longevity.

Wooden Surfaces: Wipe with a soft, slightly damp cloth. Dry immediately. Do not use abrasive cleaners.
Glass Doors: Clean with a glass cleaner and a soft, lint-free cloth.
Hardware: Periodically check and tighten screws and hinges if necessary.

CAUTION! Never use harsh chemicals, solvents, or scouring pads. Avoid excessive moisture.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Doors not closing properly	Hinges misaligned	Adjust hinge screws to realign the door.
Drawer sticking or not sliding	Runners misaligned or obstructed	Check alignment of runners; ensure no objects are blocking the path.
Unit wobbles	Floor uneven or legs not adjusted	Use a level to check; adjust furniture glides if available.
Screws not tightening	Stripped threads or incorrect screw	Do not force. Verify you are using the correct screw from the hardware pack.
Glass door feels loose	Hinge screws loose	Tighten screws on the hinge. Do not overtighten.

Reminder: The unit must be secured to the wall to prevent tipping.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty booklet included in the packaging or available at IKEA stores for full terms and conditions.

For assembly help, missing parts, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the specific product page online for digital manuals and guides.

Note: Keep your receipt as proof of purchase.