IKEA LIATORP 304.397.25 Cabinet instructions manual

The IKEA LIATORP 304.397.25 is a versatile cabinet from the LIATORP series, designed for living room, dining room, or hallway storage. It features a classic design with glass doors, adjustable shelves, and a sturdy construction. Below are key sections for safety, parts list, assembly instructions, installation, care, and troubleshooting.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Installation & Placement 5. Adjustments & Features 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are present. Key components: Cabinet frame, glass doors, shelves, back panel, hinges, screws, cam locks, dowels, and mounting hardware.

Part DescriptionQuantityIdentification Code
Cabinet side panel2A
Top/Bottom panel2B
Back panel1C
Adjustable shelf2D
Glass door with frame2E
Hinge set4F
Cam lock screw8G
Dowel12H
Mounting bracket2I
Instruction manual1-

Safety Information

Read all instructions before assembly. Ensure a safe workspace.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Use the included Allen key; do not overtighten screws.
  3. Keep small parts away from children during assembly.
  4. For stability, always secure the cabinet to the wall using the provided brackets and screws.

WARNING! Cabinet is heavy; assemble with two people. To prevent tipping, this furniture must be permanently fixed to the wall.

Assembly Instructions

Follow steps in order. Allow 60-90 minutes for assembly.

  1. Prepare: Unpack all parts, check against list. Lay panels on protective covering.
  2. Frame: Connect side panels (A) to bottom panel (B) using dowels (H) and cam locks (G). Attach top panel similarly.
  3. Back panel: Insert back panel (C) into grooves on rear of frame. Secure with provided nails or screws.
  4. Shelves: Insert adjustable shelves (D) onto shelf support pins. Position as desired.
  5. Doors: Attach hinges (F) to cabinet sides as marked. Hang glass doors (E). Adjust door alignment using hinge screws.
  6. Final check: Ensure all cam locks are fully tightened. Doors should open and close smoothly.

CAUTION! Do not force parts. If something doesn't fit, check orientation and step again.

Installation & Placement

Adjustments & Features

Doors: Adjust hinge screws to align doors and set closing tension. Shelves: Move shelf support pins to change height. Glass Care: Clean with a soft, lint-free cloth and glass cleaner. Avoid abrasive materials.

Tip: For smooth operation, periodically check hinge tightness.

Care & Maintenance

Wood surfaces: Dust with a soft, dry cloth. For stains, use a damp cloth with mild soap; dry immediately. Glass: Use a dedicated glass cleaner. Avoid harsh chemicals.

CAUTION! Do not use wax, polish, or abrasive cleaners on surfaces. Never soak the furniture with water.

Troubleshooting

SymptomPossible CauseCorrective Action
Doors not alignedHinges loose or misadjustedTighten hinge screws; adjust door height/ depth per hinge instructions.
Cabinet wobblesFloor uneven or not attached to wallPlace on level surface; ensure wall attachment brackets are securely fixed.
Shelf won't stayShelf support pins not fully insertedEnsure pins are clicked securely into holes on both sides.
Cam lock won't tightenDowel misalignedLoosen, realign panels so dowel enters cam lock hole, then retighten.
Scratches on assemblyLack of protective surfaceAssemble on carpet or cardboard. Minor scratches can be touched up with IKEA repair markers.

Note: For missing parts or damaged components, contact IKEA customer service with article number (304.397.25).

Warranty & Support

Refer to the IKEA limited warranty included with your purchase. This product is designed for residential use. For assembly support, missing parts, or further assistance, visit www.ikea.com or contact your local IKEA store.

Service: IKEA Customer Support: 1-888-888-4532 (US).

IKEA LIATORP 304.397.25 Cabinet instructions manual © - All Rights Reserved 2025