IKEA LETTAN 193.898.21 Mirror instructions manual

The IKEA LETTAN 193.898.21 is a rectangular wall mirror designed for bathroom or hallway use, featuring a simple frame and safety backing. It requires wall mounting using appropriate hardware (not included). Below are key sections for safety, parts list, assembly, installation, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Mounting Instructions 5. Specifications 6. Care & Maintenance 7. Troubleshooting 8. Warranty Information

Parts & Hardware

Package contents: Mirror panel with protective film, Frame sections (if applicable), Mounting brackets, Screws and wall plugs (check local regulations for wall type).

Part	Description	Quantity
Mirror panel	Rectangular safety glass with backing	1
Frame (if included)	Plastic or metal frame sections	4
Mounting brackets	Metal brackets for wall attachment	2
Screws	For securing brackets to wall	4
Wall plugs	Anchors for solid walls	4
Protective film	Removable film on mirror surface	1

Note: Hardware may vary by region. Use appropriate fixings for your wall type (plasterboard, concrete, wood).

Safety Instructions

WARNING! Serious injury or damage can occur if not installed properly.

Weight: Mirror is heavy. Use two people for handling and assembly.
Mounting surface: Ensure wall can support mirror weight. Use studs or appropriate wall anchors.
Children: Keep away from assembly area. Do not let children climb on or hang from mirror.
Glass safety: Do not strike or apply excessive pressure. If glass breaks, wear gloves and dispose carefully.
Tools: Use correct tools (drill, level, screwdriver). Wear safety glasses when drilling.

CAUTION! Check local building codes for mirror installation requirements.

Assembly Steps

Assemble on soft, flat surface to avoid scratches.

Unpack all parts and check against parts list.
If frame is separate: Connect frame sections according to diagram (usually snap or screw together).
Place mirror panel gently into frame (if applicable). Ensure protective film faces outward.
Secure mirror with provided clips or fasteners (do not overtighten).
Attach mounting brackets to back of mirror/frame using provided screws.
Verify all connections are secure before attempting to mount.

Tip: Leave protective film on until after mounting to prevent smudges.

Mounting Instructions

Mounting requires drill, level, pencil, measuring tape, and appropriate wall anchors.

Choose location: Ensure wall is flat, sturdy, and away from moisture sources (unless bathroom-rated).
Mark bracket positions: Hold mirror against wall at desired height. Use level to ensure straight. Mark screw holes.
Drill holes: Use drill bit size recommended for your wall anchors. Insert wall plugs.
Mount brackets: Screw brackets securely into wall, leaving slight gap for mirror hooks.
Hang mirror: With helper, lift mirror and engage brackets onto wall brackets.
Secure: If provided, install anti-tip screws at bottom to prevent tilting.
Remove protective film: Peel off slowly from corner.

WARNING! Double-check bracket security. Mirror must not wobble or tilt forward.

Specifications

Model: LETTAN 193.898.21
Dimensions: Approximately 60cm x 80cm (23.6" x 31.5")
Weight: Approximately 8 kg (17.6 lbs)
Material: Safety glass with protective backing, plastic/metal frame
Finish: Clear mirror with silver or black frame (varies)
Mounting: Wall-mounted, horizontal or vertical orientation
Intended use: Indoor residential use only
Safety standards: Complies with applicable glass safety regulations

Care & Maintenance

Clean only with soft, damp cloth and mild glass cleaner. Avoid abrasive materials.

Dust regularly with microfiber cloth.
For smudges: Spray cleaner on cloth, not directly on mirror.
Wipe gently in circular motion; dry with clean cloth.
Avoid ammonia-based cleaners on frame (if plastic).
Do not use sharp objects or excessive pressure.

CAUTION! Never spray water or cleaner directly on edges or backing to prevent moisture damage.

Troubleshooting

Issue	Possible Cause	Solution
Mirror not level	Uneven wall or incorrect marking	Remove and re-mark using level; ensure brackets aligned.
Brackets loose	Insufficient wall anchor support	Use larger anchors or mount into stud; tighten screws.
Frame not fitting	Parts misaligned during assembly	Disassemble and reassemble following diagram exactly.
Protective film hard to remove	Film aged or adhesive strong	Use hairdryer on low heat to warm edge; peel slowly.
Mirror wobbles	Anti-tip screws not installed	Install bottom security screws; check bracket engagement.

Note: If glass is cracked or chipped, do not use. Contact IKEA for replacement.

Warranty Information

IKEA Limited Warranty: This product is covered by IKEA's standard warranty terms. Refer to IKEA warranty card or website for details specific to your country.

Duration: Varies by region (typically 1-10 years for mirrors).
Coverage: Manufacturing defects in materials or workmanship.
Not covered: Damage from improper installation, accidents, misuse, or normal wear.
Claim process: Keep receipt and product label. Contact IKEA customer service.
Support: Visit www.ikea.com or your local IKEA store for assistance.

Recycling: Dispose of packaging and product according to local recycling regulations.