IKEA LERSTA 201.109.03 Floor Lamp instructions manual

The IKEA LERSTA 201.109.03 is a modern, adjustable floor lamp featuring a durable metal construction, a flexible gooseneck arm for precise light direction, an energy-efficient E27 bulb socket (max 15W LED or equivalent), a stable weighted base, and a convenient foot switch for on/off control. Designed for home office, living room, or bedroom use. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Instructions 3. Assembly Instructions 4. Specifications 5. Operation & Adjustments 6. Bulb Replacement 7. Care & Maintenance 8. Warranty Information 9. Troubleshooting

Parts & Components

Key components included in the package: Lamp base, Flexible gooseneck arm, Lamp shade, E27 bulb socket assembly, Foot switch, Power cord, Assembly hardware (screws, washers), Instruction manual.

Part Name	Description
Lamp Base	Weighted metal base for stability
Gooseneck Arm	Adjustable metal arm for directing light
Lamp Shade	Fabric or metal shade (model dependent)
E27 Socket	Standard screw-type bulb socket
Foot Switch	Integrated on/off switch on power cord
Power Cord	Insulated cord with plug
Assembly Hardware	Screws and washers for assembly

Safety Instructions

Read all instructions before assembly and use.

Electrical Safety: Use only with 100-240V AC, 50/60Hz. Ensure power cord is undamaged.
Bulb Specification: Use only E27 base bulbs, max 15W LED or equivalent. Do not exceed wattage.
Placement: Place on stable, level surface away from heat sources and water.
Children: Keep out of reach of young children. Lamp can tip over if pulled.
Maintenance: Unplug lamp before cleaning or replacing bulb.

WARNING! Risk of electric shock or fire if used improperly. Do not modify cord or plug.

Assembly Instructions

Estimated assembly time: 10-15 minutes. Tools required: Phillips screwdriver (included if specified).

Prepare Base: Place weighted base on a soft surface to prevent scratches.
Attach Gooseneck: Insert the threaded end of the gooseneck arm into the hole on the base. Secure with provided washer and screw from underneath. Tighten firmly.
Attach Socket Assembly: Slide the socket assembly onto the top of the gooseneck arm. Align the pre-drilled holes and secure with the small screws provided.
Attach Lamp Shade: Place the lamp shade over the socket assembly. For clip-on shades, squeeze the clips and attach to the socket ring. For screw-on shades, twist clockwise until snug.
Route Cord: Run the power cord down the gooseneck arm and out from the base. Ensure it is not pinched.
Final Check: Ensure all connections are tight and the lamp stands upright without wobbling.

CAUTION! Do not overtighten screws. Ensure the lamp is unplugged during assembly.

Specifications

Model: LERSTA 201.109.03
Type: Adjustable Floor Lamp
Material: Metal base and arm, Fabric/Metal shade
Bulb Socket: E27 (max 15W LED or equivalent, bulb not included)
Power Supply: 100-240V AC, 50/60Hz
Cord Length: Approximately 1.8 meters (6 feet)
Switch Type: Foot switch (on/off)
Adjustability: Flexible gooseneck arm
Dimensions (HxW): Approx. 140 cm H x 30 cm W (varies by model)
Weight: Approx. 3.5 kg

Operation & Adjustments

Plug the lamp into a standard wall outlet. Use the foot switch to turn the lamp ON/OFF.

Adjusting the Light: Gently bend the gooseneck arm to direct the light where needed. The arm is designed to hold its position.

Positioning: Place the lamp on a stable surface near a power outlet. Ensure the cord is not a tripping hazard.

Tip: For task lighting, position the lamp so the light shines over your shoulder onto your work surface to reduce glare.

Bulb Replacement

Unplug the Lamp: Always disconnect from power before replacing the bulb.
Allow to Cool: If the lamp was on, let the old bulb cool completely.
Remove Shade (if necessary): For some models, you may need to remove the shade to access the bulb. Twist or unclip carefully.
Replace Bulb: Unscrew the old bulb counterclockwise. Screw in the new E27 bulb clockwise until snug. Do not exceed 15W LED or equivalent.
Reattach Shade & Test: Reattach the shade if removed. Plug in the lamp and test with the foot switch.

WARNING! Use only the specified bulb type to prevent overheating and damage.

Care & Maintenance

Cleaning: Unplug the lamp. Wipe the base and arm with a soft, dry cloth. For fabric shades, use a vacuum cleaner with a soft brush attachment. For metal shades, a damp cloth can be used, then dried immediately.

Storage: If storing, disassemble in reverse order of assembly and pack in original box if possible.

CAUTION! Do not immerse any part of the lamp in water or use abrasive cleaners. Do not use solvents.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on the IKEA website for your country. The warranty typically covers material and manufacturing defects under normal household use for a specified period.

For warranty service, contact your local IKEA store with your proof of purchase (receipt).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check wall outlet; replace bulb; ensure plug is fully inserted and foot switch is pressed firmly.
Lamp flickers	Loose bulb / Faulty bulb / Poor socket contact	Turn off and unplug. Tighten bulb. If problem persists, try a different bulb.
Lamp is unstable/wobbly	Base not assembled tightly / Uneven surface	Ensure the gooseneck arm is screwed tightly into the base. Place on a level surface.
Gooseneck arm won't hold position	Arm over-extended / Wear over time	Do not bend the arm beyond its natural range. The tension may lessen with extensive use.
Overheating	Bulb wattage too high / Blocked vents	Immediately unplug. Use only a 15W max LED or equivalent bulb. Ensure shade is not blocking socket ventilation.

Disposal: Dispose of the lamp and bulbs according to local electronic waste (e-waste) regulations. Do not dispose of with household trash.

Customer Support: For missing parts or further assistance, contact your local IKEA store or visit www.ikea.com.