IKEA LEDSJÖ 703.286.26 Wall Lamp instructions manual

The IKEA LEDSJÖ 703.286.26 is a modern, energy-efficient LED wall lamp designed for indoor use. It features a sleek design, integrated LED light source, and is intended for wall mounting. Below are key sections covering safety, features, installation, operation, care, and troubleshooting.

Features at a Glance

Key components: LED light source, wall mounting bracket, power cord, and mounting hardware.

Feature	Description
Light Source	Integrated, non-replaceable LED
Power Consumption	Low energy consumption
Mounting	Designed for wall mounting
Design	Sleek, modern appearance
Operation	On/Off via wall switch or inline switch (if included)
Dimmability	Check product label; not all models are dimmable
IP Rating	For indoor use only
Materials	Metal and/or plastic construction

Safety Information

Read all instructions before installation and use.

1. Disconnect Power: Always turn off power at the circuit breaker before installation or maintenance.
2. Correct Voltage: Ensure your home's voltage matches the lamp's rating (e.g., 120V AC).
3. Professional Installation: If unsure, hire a qualified electrician.
4. Do Not Modify: Never modify the lamp or its components.
5. Keep Dry: For indoor use only. Do not expose to moisture or outdoor elements.
6. Heat: LED generates less heat but ensure adequate ventilation.

WARNING! Risk of electric shock. Installation involves working with electrical wiring. If not qualified, seek professional help.

Package Contents

Unpack carefully and verify all parts are included.

• LEDSJÖ Wall Lamp unit (1)
• Mounting bracket (1)
• Screws and wall plugs (set)
• Instruction manual (this sheet)
• Note: Power cord is attached to the lamp. Additional parts may vary by region.

If any part is missing or damaged, contact IKEA customer service or return to store.

Specifications

• Model: LEDSJÖ 703.286.26
• Light Source: Integrated LED
• Luminous Flux: [Value] lumens (check product label)
• Color Temperature: [Value] Kelvin (e.g., 2700K warm white)
• Power Consumption: [Value] Watts
• Input Voltage: 120V AC, 60Hz (for North America)
• Dimensions: [Height] x [Width] x [Depth] cm/inches
• Weight: [Value] kg/lbs
• Material: [e.g., Steel, Plastic]
• Finish: [e.g., White, Black]
• Dimmable: Yes/No (If yes, compatible with leading-edge or trailing-edge dimmers)
• Expected Lifetime: [Value] hours

Installation Instructions

Tools required: Screwdriver, drill, pencil, level, wire strippers (if connecting wires), voltage tester.

1. Turn Off Power: Switch off power at the main circuit breaker for the installation area.
2. Mark Position: Hold mounting bracket against wall at desired height. Use a level to ensure it's straight. Mark screw holes with a pencil.
3. Drill Holes: Drill holes at marked points. Insert wall plugs if drilling into drywall or masonry.
4. Attach Bracket: Align bracket with holes and secure it to the wall using provided screws.
5. Electrical Connection (if required):
   • If lamp requires hardwiring: Connect the lamp's wires (typically black/live, white/neutral, green or yellow/green earth) to your household wiring. Use wire nuts to secure connections. Follow local electrical codes.
   • If lamp has a plug: Ensure a suitable outlet is nearby.
6. Attach Lamp: Place the lamp onto the mounted bracket. It may click into place or require securing with small screws (provided).
7. Final Check: Ensure all screws are tight and the lamp is secure. Keep wires neatly tucked away.

CAUTION! Do not restore power until installation is complete and the lamp is fully assembled.

Operation

1. Power On: Restore power at the circuit breaker.
2. Switch On: Use the wall switch connected to the lamp's circuit, or the inline switch on the cord (if present).
3. Dimming (if applicable): If the lamp is dimmable, use a compatible dimmer switch to adjust light level. Do not use with non-dimmable switches as it may cause damage.

Note: The LED light source is integrated and cannot be replaced separately. If the light fails, the entire unit may need replacement.

Care & Maintenance

To ensure longevity and safety:

1. Cleaning: Turn off and let the lamp cool. Wipe with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth. Do not use abrasive cleaners, chemicals, or solvents.
2. Inspection: Periodically check that the lamp is securely mounted and that screws are tight.
3. Do Not Immerse: Never submerge the lamp in water or other liquids.

CAUTION! Always disconnect power before cleaning or performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power is off Faulty wall switch Loose connection	Check circuit breaker/power outlet. Test switch with another lamp. Turn off power and check all wire connections.
Lamp flickers	Incompatible dimmer (if used) Loose connection	Ensure a compatible dimmer is used. Check and secure all connections.
Light output is dim	Dimmer set to low (if used) End of LED life	Adjust dimmer to full brightness. If lamp is old, the LED may be nearing end of life.
Lamp is loose on wall	Loose screws Insufficient wall support	Tighten mounting screws. Ensure bracket is fixed to a wall stud or use appropriate anchors.
Unusual noise or smell	Electrical fault	IMMEDIATELY turn off power at the breaker. Do not use. Contact a qualified electrician.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for specific terms and duration.

For assistance:
Visit: www.ikea.com
Contact your local IKEA store.
Have your product name (LEDSJÖ) and article number (703.286.26) ready.

Disposal Information

This product contains electronic components and must not be disposed of with household waste.

At the end of its life, please:

1. Return it to an IKEA store for recycling, or
2. Dispose of it at a designated electronic waste (e-waste) recycling facility in accordance with local regulations.

This helps conserve resources and protects the environment.