IKEA LEDLJUS 003.574.53 String Lights instructions manual

The IKEA LEDLJUS 003.574.53 is a decorative indoor string light set with energy-efficient LED bulbs, designed for creating ambient lighting. It features a plug-in power supply, multiple light points on a flexible wire, and is intended for temporary decorative use. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Installation & Setup 5. Operation 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: LED string lights, plug-in power adapter/transformer, and flexible wire for shaping.

Feature	Description
LED Bulbs	Energy-efficient, long-life LED lights
Power Supply	Plug-in adapter for standard outlet
Wire Length	Flexible wire for easy placement and shaping
Indoor Use Only	Designed for indoor decorative lighting
Low Heat Emission	LEDs remain cool to the touch during operation

Safety Information

Read all instructions before installation and use.

For indoor use only. Do not use outdoors or in damp/wet locations.
Do not place near heat sources, open flames, or flammable materials.
Ensure the power adapter is plugged into a properly grounded outlet.
Do not overload electrical circuits.
Keep out of reach of children and pets to prevent entanglement or electric shock.
Do not cut, modify, or attempt to repair the string lights.

WARNING! Risk of electric shock. Unplug before handling, cleaning, or when not in use for extended periods.

Package Contents

LED string lights (1 set)
Plug-in power adapter/transformer (1)
Instruction manual (this sheet)

Note: Inspect contents upon unpacking. Do not use if any parts are damaged or missing.

Installation & Setup

Unpack and carefully untangle the string lights.
Plan the layout. The flexible wire can be shaped around objects, along shelves, or across walls.
Plug the power adapter into a standard 120V AC electrical outlet.
Connect the string light plug to the adapter output socket.
Arrange the lights as desired, ensuring the wire is not pinched, stretched, or placed under tension.
Do not secure the wire with staples, nails, or sharp fasteners that could damage insulation.

Tip: Test the lights after plugging in before final placement.

Operation

To turn on: Ensure the adapter is plugged into a live outlet. The lights should illuminate immediately.

To turn off: Unplug the adapter from the wall outlet. Do not pull on the wire to disconnect.

Usage Notes:

Designed for temporary decorative use. It is recommended not to leave the lights on continuously for more than 24 hours.
If the lights become warm (not typical for LEDs), unplug immediately and allow to cool.

Care & Maintenance

Unplug the lights and allow to cool before cleaning or storing.

Wipe the wire and bulbs gently with a dry, soft cloth.
Do not use liquids, solvents, or abrasive cleaners.
For storage, loosely coil the lights. Do not wrap tightly or kink the wire.
Store in a cool, dry place away from direct sunlight.

CAUTION! Never immerse the lights, wire, or adapter in water or other liquids.

Specifications

Product Code: 003.574.53
Light Source: Integrated LEDs (non-replaceable)
Input Voltage: 120V AC, 60Hz
Output via Adapter: Low voltage DC (see adapter label)
Power Consumption: Low energy use (see packaging for exact wattage)
Cable Length: Approximately [Length] feet/meters (refer to packaging)
Number of Lights: [Number] LEDs per string
Color Temperature: Warm white / Cool white (as per product variant)
Certifications: ETL listed or equivalent for US market

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lights do not turn on	Adapter not plugged in / faulty outlet	Check that adapter is firmly plugged into a working outlet. Try a different outlet.
Partial string dark	Loose connection / damaged wire	Check connections between string and adapter. Inspect wire for cuts or breaks. Do not attempt repair; discontinue use if damaged.
Adapter is warm/hot	Overheating / ventilation blocked	Unplug immediately. Ensure adapter is in an open area, not covered by fabrics or furniture. Allow to cool completely.
Flickering lights	Loose connection / adapter issue	Ensure all plugs are secure. If problem persists, the adapter or string may be faulty.

Important: If the product is damaged, malfunctions, or you suspect an electrical problem, stop using it immediately and unplug.

Warranty & Support

This IKEA product is covered by the IKEA limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on the IKEA website.

For customer service, spare parts, or more information:

Visit: www.ikea.com
Contact your local IKEA store.
Have the product name (LEDLJUS) and article number (003.574.53) ready.

Disposal: At end of life, do not dispose with household waste. Recycle according to local regulations for electronic products.