IKEA LAUTERS 204.049.05 Table Lamp instructions manual

The IKEA LAUTERS 204.049.05 is a modern table lamp designed for ambient lighting. It features a metal base, a fabric shade, an integrated on/off switch on the cord, and uses a maximum E26/E27 7W LED bulb (not included). Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Metal base, Fabric shade, Cord with integrated switch, Bulb socket (E26/E27).

Parts & Tools Required

Inspect all parts from packaging before assembly.

1. Base: 1 metal base unit.
2. Shade: 1 fabric lamp shade.
3. Cord Set: 1 pre-assembled cord with switch and socket.
4. Hardware: Any included screws or fasteners (if applicable).
5. Tools: No tools required for basic assembly. A screwdriver may be needed only if parts are secured with screws.
6. Bulb: 1 x E26/E27 LED bulb, max 7W (not included).

NOTE: Ensure you have a compatible LED bulb before assembly.

Assembly Instructions

Follow these steps to assemble your lamp. Ensure the lamp is unplugged during assembly.

1. Prepare Workspace: Clear a flat, stable surface.
2. Attach Shade to Base: Align the shade's frame with the top of the lamp base. Gently press or twist (if designed) until it clicks or sits securely. Do not force.
3. Secure Cord (if required): If the cord is separate, thread it through the base's channel and ensure the switch is accessible. Most models are pre-assembled.
4. Install Bulb: Screw a compatible max 7W LED bulb into the socket. Do not overtighten.
5. Final Check: Ensure all parts are firmly connected and the shade is straight.

WARNING! Do not plug in or turn on the lamp until assembly is complete and a bulb is installed.

Specifications

• Product Name: LAUTERS
• Article Number: 204.049.05
• Type: Table Lamp
• Base Material: Metal
• Shade Material: Fabric
• Bulb: 1 x E26/E27 base, Max 7W LED (not included)
• Switch: Integrated on/off switch on cord
• Cord Length: ~1.8 m (6 ft)
• Input Voltage: 120V AC, 60Hz (for North America)
• Dimensions (approx.): Height: 40 cm (15.75"), Base Diameter: 15 cm (5.9")

Operation & Controls

The lamp is operated via the rocker switch on the power cord.

To Turn On: Press the "I" side of the switch on the cord.

To Turn Off: Press the "O" side of the switch on the cord.

Note: This lamp does not have a dimmer function. For adjustable light, use a dimmable LED bulb with an external dimmer switch (not provided).

Bulb Replacement

1. Ensure the lamp is turned OFF and UNPLUGGED from the wall outlet.
2. Allow the existing bulb to cool completely if it was recently on.
3. Gently grip the bulb and turn it counterclockwise to remove it from the socket.
4. Insert a new E26/E27 LED bulb with a maximum wattage of 7W. Turn clockwise until snug. Do not overtighten.
5. Plug the lamp back in and test with the switch.

CAUTION! Use only LED bulbs with a maximum rating of 7W. Higher wattage or incompatible bulb types (like incandescent or halogen) may cause overheating and damage.

Placement & Usage

For optimal performance and safety:

1. Place on a stable, level, and heat-resistant surface (e.g., bedside table, desk, shelf).
2. Keep away from edges where it could be knocked over.
3. Ensure the cord is not pinched, frayed, or placed under rugs or heavy furniture.
4. Do not place near direct heat sources (radiators, stoves) or in excessively humid areas (bathrooms).
5. This lamp is for indoor use only.

Safety Information

WARNING! To reduce the risk of fire, electric shock, or injury:

• Always unplug the lamp before assembly, cleaning, or bulb replacement.
• Use only the specified LED bulb (max 7W).
• Do not operate the lamp if the cord or plug is damaged.
• Do not use the lamp with a dimmer switch unless using a dimmable LED bulb and compatible dimmer.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction.
• Children should be supervised to ensure they do not play with the appliance.

Care & Cleaning

1. Unplug the lamp from the wall outlet and allow it to cool completely.
2. Base: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.
3. Shade: Gently vacuum with a soft brush attachment or dust with a dry, soft cloth. Do not immerse in water or use liquid cleaners.
4. Cord: Wipe with a dry cloth. Ensure it is completely dry before plugging back in.

CAUTION! Never immerse the lamp, base, or cord in water or other liquids.

Warranty & Support

Refer to the IKEA warranty terms provided with your purchase or available at IKEA stores and www.IKEA.com. This product is designed and intended for household use only.

For product support, assembly help, or spare parts:

• Visit: www.IKEA.com
• Contact your local IKEA store.
• Refer to your original purchase receipt for warranty details.

Troubleshooting

Disposal: Dispose of this product and any used bulbs according to your local electronic waste (e-waste) and recycling regulations.