IKEA LAMPAN 200.554.21 Table Lamp instructions manual

The IKEA LAMPAN 200.554.21 is a compact, energy-efficient table lamp designed for home and office use. It features a simple, modern design with a white plastic shade and base, uses an E14 bulb (max 7W LED or 15W CFL), includes an in-line switch on the power cord, and requires assembly. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Assembly Instructions 4. Installation & Setup 5. Specifications 6. Operation 7. Care & Cleaning 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: White plastic shade and base, E14 bulb socket, in-line switch on power cord, pre-assembled lamp holder.

Feature	Description
Shade & Base	Made of durable, white plastic
Bulb Socket	E14 (small Edison screw) type
Recommended Bulb	Max 7W LED or 15W CFL (not included)
Switch	In-line switch on power cord for easy on/off
Power Cord Length	Approximately 1.8 meters (6 feet)
Assembly Required	Minimal assembly needed
Design	Compact and modern, suitable for desks, bedside tables, etc.

Safety Information

Read all instructions before assembly and use.

Use only with recommended bulb types (max 7W LED or 15W CFL). Do not exceed wattage.
Ensure lamp is unplugged before assembly, installing/changing bulb, or cleaning.
Place lamp on a stable, level surface away from edges where it could be knocked over.
Keep away from water, moisture, and heat sources.
Do not cover the lamp or place material over the shade while in use.
This lamp is for indoor use only.

WARNING! Risk of electric shock or fire if used improperly. Do not modify cord or plug. If cord is damaged, discontinue use and contact IKEA.

Assembly Instructions

Unpack all parts and check contents. You should have: lamp base, lamp shade, lamp holder (pre-assembled with socket), power cord with switch, and any required screws.

Attach the base: If base is separate, align it with the bottom of the lamp holder and secure it (usually snaps or screws into place).
Attach the shade: Place the shade over the lamp holder. It typically aligns with grooves or clips and is secured by turning it clockwise until it locks.
Check stability: Ensure all parts are firmly connected and the lamp stands upright without wobbling.

Note: Do not plug in the lamp or install the bulb until assembly is complete.

Installation & Setup

Choose a location on a stable, flat surface near a power outlet.
Install the bulb: Screw an E14 bulb (max 7W LED or 15W CFL) into the socket. Do not overtighten.
Plug the power cord into a standard 120V AC (or local voltage) wall outlet.
Turn on the lamp using the in-line switch on the cord.

Tip: For best light distribution, position the lamp so the shade opening points toward the area you wish to illuminate.

Specifications

Model: LAMPAN 200.554.21
Type: Table Lamp
Material: Plastic (shade and base)
Color: White
Bulb: 1 x E14 socket (small Edison screw)
Max Wattage: 7W LED or 15W CFL (bulb not included)
Power Supply: 120V AC, 60Hz (or local standard)
Cord Length: ~1.8 m (6 ft)
Switch: In-line on cord
Dimensions (approx.): Height: 30 cm (11.8 in), Base diameter: 15 cm (5.9 in)
Weight: ~0.5 kg (1.1 lb)

Operation

Operation is simple via the in-line switch.

To turn on: Press the switch on the power cord to the "I" or ON position.
To turn off: Press the switch to the "O" or OFF position.
Adjusting light: The light direction is fixed. For different lighting effects, you can use bulbs with different color temperatures (warm white, cool white).

Note: The lamp may become warm during extended use. This is normal. Ensure adequate ventilation around the lamp.

Care & Cleaning

Always unplug the lamp before cleaning.

Use a soft, dry cloth to wipe the shade and base.
For stubborn marks, use a slightly damp cloth with mild soap. Do not use abrasive cleaners or solvents.
Ensure the lamp is completely dry before plugging it back in.
To clean the bulb (when cool and unplugged), wipe gently with a dry cloth.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off; faulty outlet	Check/replace bulb; ensure plug is secure; turn switch ON; try another outlet.
Lamp flickers	Loose bulb; incompatible/dimming bulb	Turn off, check and tighten bulb; ensure bulb type is correct (non-dimmable LED in non-dimmable fixture).
Lamp gets very hot	Bulb wattage too high; enclosed space	Use only recommended max wattage bulb; ensure lamp is in a well-ventilated area.
Shade is loose	Not properly attached during assembly	Unplug lamp. Turn shade clockwise until it locks securely into place.
Unusual smell/smoke	Electrical fault; foreign object in socket	Immediately unplug lamp. Do not use. Contact IKEA support.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with the product or available at IKEA stores.

For spare parts, assembly help, or other support:

Visit the IKEA website: www.ikea.com
Contact your local IKEA store.
Refer to the product-specific page online for more information.

Disposal: Dispose of this product and any used bulbs according to local environmental regulations for electronic waste.