IKEA LAGERGÅNG 405.424.30 Desk Lamp instructions manual

The IKEA LAGERGÅNG 405.424.30 is a modern desk lamp featuring an adjustable head and arm for directional lighting, an energy-efficient LED light source, a touch-sensitive dimmer for adjustable brightness, a stable weighted base, and a simple on/off switch. Designed for home office or study use. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Adjusting the Lamp 7. Replacing the Light Source 8. Safety Information 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable lamp head, Flexible gooseneck arm, Weighted metal base, Touch dimmer control, Integrated non-replaceable LED module.

Feature	Description
Adjustable Head	Swivels and tilts to direct light where needed
Flexible Arm	Gooseneck design for height and position adjustment
Weighted Base	Provides stability on desk surfaces
Touch Dimmmer	Touch-sensitive control to adjust brightness levels
On/Off Switch	Located at the base for power control
LED Light Source	Energy-efficient, long-life integrated LED module
Power Input	Standard power cord with plug
Finish	Matte black with white interior shade

Assembly Instructions

Unpack all parts and check contents. Ensure you have a clean, flat workspace.

Attach the base: Place the weighted base on a flat surface.
Connect the arm: Insert the gooseneck arm into the socket on the base and tighten the securing knob.
Attach the lamp head: Connect the lamp head to the top of the arm and secure it.
Route the power cord: Guide the cord through the channel in the arm if applicable.
Plug in: Connect the power cord to a standard wall outlet.

WARNING! Ensure the lamp is unplugged during assembly. Do not overtighten connections.

First-Time Setup

After assembly, position the lamp for optimal use.

Place the lamp: Position the weighted base on a stable, level desk surface.
Adjust the arm: Gently bend the gooseneck to achieve the desired height and angle.
Position the head: Tilt and swivel the lamp head to direct light onto your work area.
Power on: Press the on/off switch at the base.
Adjust brightness: Touch and hold the dimmer area to cycle through brightness levels.

CAUTION! Do not bend the arm or head beyond their natural range of motion.

Specifications

Product Name: LAGERGÅNG
Article Number: 405.424.30
Light Source: Integrated LED, non-replaceable
Lumen Output: Adjustable up to 400 lumens
Color Temperature: 2700K (Warm White)
Dimmable: Yes, via touch control
Power Consumption: Max 5W
Input Voltage: 100-240V AC, 50/60Hz
Cord Length: 1.5 meters (approx. 5 feet)
Materials: Metal base and arm, plastic shade

Controls and Operation

Primary controls are located on the lamp base.

On/Off Switch: Mechanical switch on the base. Flip to turn the lamp on or off.

Touch Dimmer: Located on the base or stem. Touch once to turn on/off. Touch and hold to adjust brightness through multiple levels (Low, Medium, High). The lamp will cycle and then turn off at the end of the cycle.

Adjustment Points: The gooseneck arm can be bent by hand. The lamp head can be tilted and swiveled.

Adjusting the Lamp

To achieve the best lighting for your task.

For reading: Position the lamp head approximately 40-50 cm (16-20 inches) from the reading material, angled to avoid glare.
For desk work: Adjust the arm so the light shines evenly across your workspace without casting a shadow from your hands.
For ambient light: Point the head towards a wall or ceiling to create indirect, softer light.

Tip: Avoid looking directly at the LED light source when it is on.

Replacing the Light Source

This lamp uses an integrated, non-replaceable LED module.

The LED light source is built into the lamp head and is not designed to be replaced by the user.
The LED has a very long lifespan (typically 25,000 hours).
If the light fails before the end of its expected life and the lamp is under warranty, contact IKEA customer service.
Do not attempt to open the lamp head, as this will void the warranty and may cause electric shock.

WARNING! Never disassemble the lamp head. There are no user-serviceable parts inside.

Safety Information

Important safety instructions for use.

This lamp is for indoor use only.
Do not use in bathrooms or other humid locations.
Keep away from children. The flexible arm is not a toy.
Do not cover the lamp or place objects on it while in use, as it may overheat.
Unplug the lamp before cleaning or when not in use for extended periods.
Do not use with dimmer wall switches unless specified as compatible.

Care & Cleaning

Unplug the lamp from the outlet before cleaning.

Use a soft, dry cloth to wipe the metal base, arm, and plastic shade.
For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners or solvents.
Ensure no moisture enters any openings or the electrical parts.
Allow the lamp to dry completely before plugging it in again.

CAUTION! Never immerse the lamp in water or other liquids.

Warranty Information

IKEA products are covered by a limited warranty. The specific warranty period may vary by country. Please refer to the IKEA warranty leaflet included with your purchase or visit the IKEA website for your local warranty terms. This warranty covers defects in material and workmanship. It does not cover damage caused by improper use, accidents, or unauthorized modifications. For warranty service, contact your local IKEA store with your proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Switch off	Ensure the lamp is plugged in. Check the wall outlet. Flip the on/off switch to ON.
Touch dimmer not responding	Incorrect touch / Power	Touch the dimmer area firmly with a finger. Ensure the lamp is plugged in and the main switch is ON.
Lamp flickers	Loose connection / Faulty outlet	Check that the plug is fully inserted into the outlet. Try a different wall outlet.
Lamp arm is loose	Connection not tightened	Gently tighten the securing knob at the base of the arm. Do not overtighten.
Light is too dim or uneven	Dimmer setting / LED issue	Adjust brightness using the touch dimmer. If problem persists, the integrated LED may be faulty.

Disposal: Dispose of this product according to local electronic waste regulations. Do not dispose of with household waste.

Customer Service: Visit www.ikea.com or contact your local IKEA store.