IKEA LAGAN 004.621.52 Refrigerator instructions manual

The IKEA LAGAN 004.621.52 is a freestanding refrigerator designed for home use, featuring adjustable shelves, a crisper drawer for fruits and vegetables, a freezer compartment, temperature control dial, reversible door hinges, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Refrigerator 8. Maintenance & Cleaning 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Refrigerator compartment, Freezer compartment, Adjustable shelves, Crisper drawer, Temperature control dial, Reversible door hinges, Leveling feet.

FeatureDescription
Refrigerator compartmentMain cooling area with adjustable glass shelves
Freezer compartmentFor freezing food items
Adjustable shelvesGlass shelves that can be repositioned
Crisper drawerHumidity-controlled drawer for fruits and vegetables
Temperature control dialAdjusts cooling intensity (1-5 or MIN-MAX)
Reversible door hingesAllows door to open from left or right side
Leveling feetAdjustable feet for stability on uneven floors
Door storageBins on door for bottles and small items
Energy efficiencyDesigned for low power consumption
Interior lightLED light for illumination when door opens

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Remove all packaging materials and tape.
  2. Adjust leveling feet: Use a wrench to raise or lower feet until refrigerator is level.
  3. Set door swing: If needed, reverse door hinges following included diagram.
  4. Position refrigerator: Allow at least 2 inches (5 cm) clearance on all sides for ventilation.
  5. Let it stand: After moving, let refrigerator stand upright for 2 hours before plugging in.

WARNING! Refrigerator is heavy; use two people for lifting. Ensure proper ventilation space.

First-Time Setup

After installation, prepare refrigerator for use.

  1. Clean interior: Wipe inside with mild soapy water, then dry thoroughly.
  2. Plug in: Connect to a dedicated 120V AC outlet.
  3. Set temperature: Turn control dial to middle setting (e.g., 3).
  4. Let cool: Allow 24 hours for refrigerator to reach optimal temperature.
  5. Load food: Once cold, place food items, avoiding overpacking.

CAUTION! Do not block air vents inside. Keep door closed during initial cooling.

Specifications

Controls and Settings

Temperature is controlled via a dial inside the refrigerator compartment.

Temperature Dial: Typically numbered 1-5 or marked MIN to MAX. Higher numbers/colder settings increase cooling.

Recommended Setting: Start at 3 or midpoint. Adjust based on ambient temperature and load.

Freezer Control: Freezer temperature is linked to main dial; colder refrigerator setting = colder freezer.

Shelves: To adjust, lift shelf slightly and reposition on supports.

Door Bins: Can be removed for cleaning by lifting upward.

Connecting to Power

Use a properly grounded outlet.

  1. Ensure refrigerator is off (dial at 0) before plugging in.
  2. Plug power cord directly into wall outlet; avoid extension cords.
  3. Turn dial to desired setting; interior light should turn on when door opens.

Tip: Use a dedicated circuit to prevent overloading.

Using the Refrigerator

Organize food for optimal cooling and efficiency.

  1. Refrigerator compartment: Store dairy, drinks, leftovers on shelves. Use door bins for condiments.
  2. Crisper drawer: Set humidity slider (if present) for fruits (low humidity) or vegetables (high humidity).
  3. Freezer compartment: Use for frozen foods, ice packs. Avoid blocking air vents.
  4. Temperature adjustment: Turn dial clockwise for colder, counter-clockwise for warmer.
  5. Defrosting: Manual defrost may be required if ice buildup exceeds 1/4 inch (0.6 cm).

WARNING! Do not store flammable substances. Keep ventilation openings clear.

Maintenance & Cleaning

Unplug before cleaning. Use mild detergent and water; avoid abrasive cleaners.

  1. Interior: Wipe shelves, drawers, and walls with damp cloth. Dry thoroughly.
  2. Exterior: Clean door and handles with soft cloth.
  3. Condenser coils: Vacuum dust from rear or bottom coils every 6 months.
  4. Door seals: Wipe with water to keep clean and ensure tight seal.
  5. Defrost: If manual defrost, empty refrigerator, place towels, let ice melt naturally.

CAUTION! Never use sharp objects to remove ice. Do not use steam cleaners.

Energy Saving Tips

Regulatory Information

This appliance complies with relevant safety standards. For EU markets, complies with Directive 2014/35/EU (LVD) and 2014/30/EU (EMC). Copyright © IKEA. The IKEA trademark and model name are property of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower/thermostatCheck plug and outlet; ensure dial is not at 0; allow time after first plug-in.
Too cold/too warmTemperature settingAdjust dial; avoid placing near heat source or in direct sunlight.
Noise during operationNormal operation/levelingSome noise is normal; ensure refrigerator is level; check for items vibrating.
Water pooling insideDrain cloggedCheck drain hole at back of refrigerator compartment; clear if blocked.
Door not sealingSeals dirty/obstructedClean door seals; ensure nothing prevents door from closing fully.
Light not workingBulb/switchReplace LED bulb if accessible; check door switch.

Reset: Unplug for 5 minutes, then plug back in.

Service: Contact IKEA customer service or authorized service provider.

IKEA LAGAN 004.621.52 Refrigerator instructions manual © - All Rights Reserved 2025