IKEA LACK 204.989.37 TV Stand instructions manual

The IKEA LACK 204.989.37 is a modern, low-profile TV stand designed for living rooms and bedrooms. It features a clean, minimalist design with a durable particleboard and fiberboard construction, finished with a white or black lacquer. The stand includes a spacious top surface for TVs up to 55 inches, an open shelf for media devices, and cable management holes for organized wiring. Below are key sections for safety, assembly, installation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Placement 4. Specifications 5. Parts & Hardware 6. Connecting Devices & Cable Management 7. Weight Limits & Compatibility 8. Safety Precautions 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Main panel (top), side panels, back panel, shelf, pre-attached legs, and hardware kit.

FeatureDescription
Top SurfaceSpacious area for TV and decorative items
Open ShelfFor media players, game consoles, or storage
Cable Management HolesRear holes to route cables neatly
Pre-attached LegsSturdy legs for stable elevation
Minimalist DesignClean lines suitable for various decors
Durable ConstructionParticleboard and fiberboard with lacquer finish
Easy AssemblyTool-free or minimal tools required
Weight CapacitySupports TVs up to 55 inches (check weight limit)
Finish OptionsWhite or black lacquer
DimensionsSee Specifications section

Assembly Instructions

Unpack all parts and hardware. Lay components on a soft surface to avoid scratches.

  1. Identify parts: Main panel (top), two side panels, back panel, shelf, four legs.
  2. Attach legs: If not pre-attached, screw legs into bottom of side panels.
  3. Connect side panels to top: Use provided cam locks or screws to secure side panels to top panel.
  4. Install back panel: Slide or screw back panel into slots on side panels.
  5. Insert shelf: Place shelf onto supports between side panels.
  6. Secure all connections: Tighten all screws and cam locks firmly.

WARNING! Assemble on a flat, stable surface. Use two people for larger steps to prevent tipping.

Installation & Placement

Choose location carefully before placing TV stand.

  1. Select stable surface: Place on even, hard flooring (not carpet alone).
  2. Position away from heat: Keep away from radiators, heaters, or direct sunlight.
  3. Ensure ventilation: Allow space behind stand for cable routing and device airflow.
  4. Load TV: With assistance, center TV on top surface, ensuring it does not overhang.
  5. Add devices: Place media players on shelf, routing cables through management holes.

CAUTION! Do not place heavy objects on shelf exceeding weight limit. Ensure TV is centered and secure.

Specifications

Parts & Hardware

Included in package (illustrated in manual).

Main Parts: Top panel (1), Side panels (2), Back panel (1), Shelf (1), Legs (4).

Hardware: Cam locks (4-6), Screws (various lengths), Dowels, Allen key (if required).

Assembly: Follow step-by-step diagrams. Ensure all cam locks are turned to locked position (click sound). Tighten screws firmly but do not overtighten to avoid stripping.

Connecting Devices & Cable Management

Use rear cable holes to organize wires.

  1. Route power cords: Pass through left or right cable hole.
  2. Connect devices: HDMI, audio cables from shelf devices to TV.
  3. Bundle excess: Use ties (not included) to bundle cables behind stand.
  4. Keep cables clear: Ensure no cables are pinched or strained.

Tip: Label cables for easy identification. Keep power cords separate from signal cables to reduce interference.

Weight Limits & Compatibility

Adhere to specified limits for safety.

  1. Top surface: Max 66 lbs (30 kg) distributed evenly.
  2. Shelf: Max 33 lbs (15 kg) for media devices.
  3. TV size: Compatible with most flat-panel TVs up to 55 inches, provided weight and base dimensions do not exceed stand top.
  4. Check TV manual: Verify TV base fits within stand top dimensions (55.1" width).
  5. Do not overload: Exceeding weight limits can cause instability or damage.

WARNING! Never place CRT (tube) TVs or excessively heavy objects on this stand. Ensure TV is secured per manufacturer instructions (straps if provided).

Safety Precautions

Prevent tipping and ensure secure placement.

Anti-tip: For added safety, especially with children or pets, secure stand to wall using furniture straps (not included). Placement: Keep away from high-traffic areas where it may be bumped. Heat & Moisture: Avoid humid areas like bathrooms to prevent material damage.

Care & Cleaning

Use gentle methods to maintain finish.

Dust regularly with soft, dry cloth. For stains, dampen cloth with water and mild detergent, wring well, wipe gently, then dry immediately. Do not use abrasive cleaners, solvents, or scouring pads.

CAUTION! Avoid excessive moisture. Never spray liquids directly onto stand. Protect from sharp objects and heavy impacts.

Warranty Information

IKEA limited warranty applies. Refer to IKEA terms of sale or warranty card included with purchase. For support, visit www.ikea.com or contact your local IKEA store. Keep receipt for warranty claims.

Troubleshooting

SymptomPossible CauseCorrective Action
Stand wobblesUneven floor or loose assemblyCheck floor level; tighten all screws and cam locks.
Shelf sagsOverloadedRemove excess weight to stay under 33 lbs limit.
Scratches on surfaceRough objects or draggingUse felt pads under items; avoid sliding devices.
DiscolorationSunlight or chemical exposureMove away from direct sun; clean only with recommended methods.
Difficulty assemblingMisaligned partsDisassemble step and re-align according to diagram.

Replacement Parts: Contact IKEA for missing or damaged parts (provide article number 204.989.37).

Service: www.ikea.com or local IKEA customer service.

IKEA LACK 204.989.37 TV Stand instructions manual © - All Rights Reserved 2025