IKEA LACK 204.989.04 TV Table instructions manual

The IKEA LACK 204.989.04 is a modern, minimalist TV table designed for living rooms and entertainment areas. It features a lightweight particleboard construction with a durable ABS plastic edge banding, a high-gloss finish, and concealed metal fittings for stability. The table supports TVs up to 55 inches and includes cable management features. Below are key sections for safety, assembly, installation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Installation & Placement 6. Specifications 7. Care & Maintenance 8. Warranty Information 9. Troubleshooting

Features at a Glance

Key components: High-gloss particleboard top, ABS plastic edge banding, concealed metal fittings, pre-drilled assembly holes, integrated cable management channel.

FeatureDescription
High-gloss finishEasy to clean, modern appearance
ABS plastic edge bandingProtects edges from chipping and damage
Concealed metal fittingsProvides stability and strength without visible screws
Cable management channelKeeps cables organized and hidden
Pre-drilled assembly holesSimplifies assembly process
Lightweight constructionEasy to move and reposition
TV capacitySupports TVs up to 55 inches (maximum weight: 55 lbs)
DimensionsLength: 47 ¼", Width: 15 ¾", Height: 19 ¾"

Package Contents

Unpack and verify all parts before assembly.

  1. Table top (1 piece)
  2. Table legs (4 pieces)
  3. Metal fittings set (4 pieces)
  4. Assembly screws (8 pieces)
  5. Allen key (1 piece)
  6. Cable management clips (2 pieces)
  7. Instruction manual (this document)

WARNING! Check for damage before assembly. Contact IKEA customer service if any parts are missing or damaged.

Safety Instructions

Follow these instructions carefully to ensure safe assembly and use.

  1. Assemble on a soft surface to avoid scratching the finish.
  2. Use two people for assembly to prevent injury and damage.
  3. Do not exceed the maximum weight capacity of 55 lbs.
  4. Ensure the table is placed on a level, stable surface.
  5. Keep away from direct heat sources and moisture.

CAUTION! The table top is heavy; lift with care to avoid back injury.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools required: Allen key (included).

  1. Place the table top upside down on a soft, flat surface.
  2. Insert metal fittings into pre-drilled holes on the underside of the table top.
  3. Align legs with metal fittings and insert screws through leg holes into fittings.
  4. Tighten all screws securely using the included Allen key (do not overtighten).
  5. Turn the table upright and place on level surface.
  6. Attach cable management clips to the rear edge of the table top.

Tip: Ensure all screws are tightened evenly to maintain stability.

Installation & Placement

Specifications

Care & Maintenance

Clean with a soft, dry cloth. For stubborn stains, use a damp cloth with mild soap solution; dry immediately.

DO NOT: Use abrasive cleaners, solvents, or ammonia-based products. Avoid placing hot items directly on surface.

Warranty Information

IKEA provides a 1-year limited warranty covering manufacturing defects. Warranty does not cover damage from improper assembly, misuse, or normal wear and tear. For warranty claims, contact IKEA customer service with proof of purchase.

Troubleshooting

SymptomPossible CauseCorrective Action
Table wobblesUneven floor or loose screwsCheck floor level; tighten all screws securely.
Scratches on surfaceAbrasive cleaning or sharp objectsUse protective pads under objects; avoid dragging items.
Legs not attachingMisaligned fittingsEnsure metal fittings are properly inserted before attaching legs.
Cable clips not holdingClips not fully seatedPress clips firmly into pre-drilled holes until they click.
Surface stainsLiquid spillsClean immediately with damp cloth and mild soap; dry thoroughly.

Customer Service: 1-888-888-4532 (IKEA US) or visit www.ikea.com

IKEA LACK 204.989.04 TV Table instructions manual © - All Rights Reserved 2025