IKEA LÖVMÅNAD 805.184.47 Work Lamp instructions manual

The IKEA LÖVMÅNAD 805.184.47 is an adjustable work lamp designed for focused task lighting. It features a flexible gooseneck arm, a stable clamp base for secure attachment to desks or shelves, an energy-efficient LED light source, a touch-sensitive dimmer for adjustable brightness, and a neutral color temperature optimized for concentration. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Assembly Instructions 5. Installation & Mounting 6. Operation & Controls 7. Specifications 8. Care & Cleaning 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Adjustable gooseneck arm, Clamp base with protective pad, Integrated LED panel, Touch-sensitive dimmer control, Power adapter.

Feature	Description
Gooseneck Arm	Fully flexible for precise light positioning
Clamp Base	Securely attaches to surfaces up to 2.4 inches thick
LED Light Source	Energy-efficient, long-lasting, cool operation
Touch Dimmer	Adjust brightness with touch controls (Low/Med/High/Off)
Color Temperature	4000K neutral white light, reduces eye strain
Power Input	100-240V AC, 50/60Hz via included adapter
Cable Length	1.5m (5 ft) power cable

Safety Information

Read all instructions before assembly and use.

For indoor use only. Not suitable for damp or wet locations.
Ensure the clamp is securely fastened to a stable, level surface.
Do not exceed the maximum clamping thickness of 2.4 inches (60mm).
Unplug the lamp before cleaning or performing any maintenance.
Use only the provided power adapter. Do not modify the cord.
Keep away from children. The flexible arm is not a toy.

WARNING! Risk of electric shock. Do not open the housing. Contains no user-serviceable parts.

Package Contents

Unpack and verify all parts are present before discarding packaging.

Lamp head with integrated LED (1 pc)
Gooseneck arm (1 pc)
Clamp base assembly (1 set)
Protective rubber pad (for clamp)
Power adapter (1 pc)
Instruction manual (this document)
Mounting screws (optional, for alternative mounting)

Note: Contact IKEA customer service if any parts are missing.

Assembly Instructions

Assemble on a clean, soft surface to avoid scratches.

Attach Gooseneck to Base: Insert the threaded end of the gooseneck into the socket on the clamp base. Turn clockwise until hand-tight. Do not over-tighten.
Attach Lamp Head: Screw the lamp head onto the top of the gooseneck arm. Ensure it is secure.
Attach Protective Pad: Peel off the backing and apply the rubber pad to the inside jaw of the clamp.
Route the Cable: Guide the power cable from the lamp head down through the groove in the gooseneck and out from the base.

CAUTION! Do not bend the gooseneck at extreme angles repeatedly, as this may damage the internal wiring.

Installation & Mounting

The lamp is designed for clamp mounting. Ensure the surface is strong enough to support the lamp.

Loosen the clamp screw to open the jaws.
Position the clamp on the edge of your desk, shelf, or tabletop.
Tighten the clamp screw firmly by hand until the lamp is stable and does not wobble. Do not use tools.
Plug the power adapter into a standard wall outlet.

Tip: For a permanent installation, you can use the provided screws to mount the base directly to a surface (requires drilling).

Operation & Controls

Power on the lamp by plugging it in. The touch controls are located on the base or lamp head (model dependent).

Touch Control Operation:

Single Tap: Turn lamp ON to the last brightness setting.
Tap and Hold (2 sec): Cycle through brightness levels (Low → Medium → High).
Single Tap while ON: Turn lamp OFF.

Adjusting the Light: Gently bend the gooseneck arm to direct light exactly where needed. The arm will hold its position.

Note: The LED may feel warm during operation; this is normal.

Specifications

Model: LÖVMÅNAD 805.184.47
Light Source: Integrated non-replaceable LED
Luminous Flux: 400 lumens
Color Temperature: 4000K (Neutral White)
CRI (Color Rendering Index): >80
Dimmable: Yes, 3 levels (via touch control)
Power Consumption: 6W max
Input Voltage: 100-240V AC, 50/60Hz
Clamp Thickness Range: Up to 60mm (2.4 inches)
Arm Reach: Approx. 40cm (16 inches)
Product Dimensions (HxWxD): Approx. 45 x 15 x 15 cm
Weight: 1.2 kg

Care & Cleaning

Unplug the lamp and allow it to cool before cleaning.

Wipe the exterior with a soft, slightly damp cloth. Use mild soap if necessary.
Dry immediately with a clean, dry cloth.
Clean the LED diffuser panel gently with a dry, soft cloth to remove dust.

CAUTION! Do not use abrasive cleaners, solvents, or chemicals. Do not immerse any part of the lamp in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Loose connection	Check if the power adapter is plugged into the outlet and the lamp. Try a different outlet.
Light is dim or flickering	Touch control issue / Power issue	Ensure your finger is clean and dry when using touch controls. Check power connection.
Lamp is unstable or falls	Clamp not tight enough / Surface too thick	Tighten the clamp screw firmly. Ensure surface thickness is within 60mm limit.
Gooseneck does not hold position	Arm over-extended / Worn out	Do not bend the arm beyond its natural limit. Over time, the arm may loosen; adjust grip gently.
LED light is very warm	Normal operation / High brightness setting	This is normal for LED operation. If excessively hot, unplug and contact support.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

Recycling: Do not dispose of with household waste. Recycle according to local regulations for electronic products.

For support: Visit the IKEA website at www.ikea.com or contact your local IKEA store.

Spare Parts: Some spare parts may be available for purchase. Please refer to the IKEA website or visit a store.