IKEA LÖNSET 092.596.36 Bed Base instructions manual

The IKEA LÖNSET 092.596.36 is a bed base designed for stability and comfort, featuring a slatted bed base with adjustable firmness zones, center support beam, and compatibility with various IKEA bed frames. Below are key sections for safety, assembly, features, setup, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Parts and Components 6. Adjusting Firmness 7. Mattress Compatibility 8. Care & Maintenance 9. Safety Information 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable slats, center support beam, firmness zones, side rails, and assembly hardware.

Feature	Description
Adjustable slats	Individual slats for customized support
Center support beam	Provides extra stability and weight distribution
Firmness zones	Three zones (head, torso, feet) for optimal comfort
Side rails	Sturdy wooden rails for frame attachment
Assembly hardware	Included screws, bolts, and tools for setup
Compatible bed frames	Designed for IKEA bed frames (e.g., MALM, HEMNES)
Weight capacity	Supports up to 220 lbs per side
Material	Birch wood and steel reinforcements
Ventilation	Spaced slats for mattress airflow
Warranty	10-year limited warranty

Assembly Instructions

Unpack and verify all parts. Assemble on a clean, flat surface.

Lay out side rails parallel to each other.
Attach center support beam using provided bolts and wrench.
Insert adjustable slats into side rail grooves, spacing evenly.
Secure slats with plastic holders or clips (if included).
Place assembled bed base into bed frame and secure with screws.

WARNING! Bed base is heavy; use two people for assembly. Ensure all bolts are tightened securely.

First-Time Setup

After assembly, follow these steps for optimal use.

Place bed base into compatible IKEA bed frame.
Adjust slat firmness: Use zone adjusters for head, torso, and feet areas.
Test stability: Apply pressure to center and edges to ensure no movement.
Add mattress: Place mattress evenly on slats, ensuring no overhang.

CAUTION! Do not jump on bed base. Ensure weight is distributed evenly.

Specifications

Model: LÖNSET 092.596.36
Size: Compatible with Queen (60" x 80") bed frames
Material: Birch wood slats, steel beam, plastic holders
Weight Capacity: 440 lbs total (220 lbs per side)
Slat Count: 28 adjustable slats
Firmness Zones: 3 (head, torso, feet)
Ventilation: 2-inch gaps between slats
Warranty: 10-year limited warranty
Color: Natural birch finish

Parts and Components

Included in package: Side rails (2), center support beam (1), adjustable slats (28), plastic holders (56), screws and bolts (20), Allen wrench (1), instruction manual.

Tools needed: Phillips screwdriver (optional), rubber mallet (for tapping slats).

Assembly tips: Match part numbers from manual to components. Lay parts in order before assembly. Keep hardware organized.

Adjusting Firmness

Customize support by adjusting slat tension in three zones.

Identify zones: Head (top 1/3), torso (middle 1/3), feet (bottom 1/3).
Adjust tension: Use zone adjusters on side rails to increase/decrease firmness.
Test comfort: Lie on mattress to feel changes; readjust as needed.
Lock settings: Tighten adjusters to secure preferred firmness.

Tip: Firmer setting for back support; softer for pressure relief.

Mattress Compatibility

Compatible with most mattresses: Innerspring, memory foam, latex, hybrid.

Ensure mattress size matches bed base (Queen: 60" x 80").
Place mattress centered on slats; avoid overhang beyond rails.
Use non-slip pad between mattress and slats if needed.
Rotate mattress every 3-6 months for even wear.

Note: Not compatible with box springs. Use only with slatted bed frames.

Care & Maintenance

Regular care ensures longevity and performance.

Clean slats with dry cloth; avoid water or cleaning chemicals.
Check bolts every 6 months; tighten if loose.
Inspect slats for cracks or warping; replace if damaged.
Ensure ventilation gaps are clear of debris.

CAUTION! Do not use wet cleaners; wood may warp. Avoid excessive moisture.

Safety Information

Follow safety guidelines to prevent injury or damage.

Max weight: 440 lbs total. Do not exceed limit.
Assemble on flat surface; ensure all parts are secure.
Keep away from heat sources or direct sunlight.
Use only with compatible IKEA bed frames.
Children should not play on or under bed base.

WARNING! Failure to follow instructions may void warranty.

Warranty Information

10-year limited warranty. Covers defects in materials or workmanship. Not covered: Damage from misuse, improper assembly, accidents, or normal wear. For claims, contact IKEA customer service with proof of purchase. Warranty valid only for original purchaser.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Squeaking noises	Loose bolts or friction	Tighten all bolts; apply wax or lubricant to contact points.
Slats slipping out	Plastic holders not secure	Reinsert slats; ensure holders are snapped into place.
Uneven support	Slats not adjusted evenly	Adjust firmness zones; redistribute slat tension.
Bed base wobbles	Frame not level or bolts loose	Check floor level; tighten frame and base connections.
Weight capacity exceeded	Too much weight on one side	Reduce weight; ensure even distribution.

Support: IKEA customer service: 1-888-888-4532; www.ikea.com