IKEA LÅGTRYCK 205.132.02 Floor Lamp instructions manual

The IKEA LÅGTRYCK 205.132.02 is a modern floor lamp designed for ambient lighting. It features a minimalist design, adjustable height or angle (if applicable), an energy-efficient bulb socket (type specified in packaging), a stable base, and an integrated on/off switch or cord switch. Assembly is required. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly & Installation 5. Specifications 6. Operation 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Lamp base, stem, shade, bulb socket, power cord with switch, and hardware for assembly.

Feature	Description
Design	Minimalist floor lamp for ambient lighting
Adjustability	Fixed design or adjustable height/angle (check model variant)
Bulb Socket	Compatible with specific bulb type (e.g., E26/E27 max wattage)
Switch	Integrated on/off switch on cord or base
Power Cord	Standard length for placement near outlet
Base	Stable, weighted base to prevent tipping
Materials	Metal, plastic, or fabric as per design

Package Contents

Unpack and verify all parts before assembly. Contact IKEA if any part is missing.

Lamp base (1 piece)
Stem sections (quantity as per model)
Lampshade (1 piece)
Bulb socket assembly (pre-assembled or separate)
Power cord with switch (1 piece)
Hardware pack (screws, bolts, etc.)
Instruction manual (this sheet)

NOTE: Light bulb is not included. Use recommended bulb type and wattage.

Safety Instructions

Read all instructions before assembly and use.

Electrical Safety: Use only with correct voltage (120V AC). Do not modify plug or cord.
Bulb Selection: Use only bulb type and maximum wattage specified on socket label.
Placement: Place on stable, level surface away from heat sources and water.
Cord Management: Do not run cord under carpets or furniture. Avoid pinching.
Supervision: Do not leave children unattended with lamp. Keep away from young children.
Maintenance: Unplug lamp before cleaning or bulb replacement.

WARNING! Risk of electric shock or fire if used improperly. Do not use if cord or plug is damaged.

Assembly & Installation

Estimated assembly time: 15-30 minutes. Tools required: Phillips screwdriver (if not included).

Prepare Area: Clear a spacious, soft surface to avoid scratching parts.
Attach Base: If separate, attach the stem to the weighted base using provided bolts. Tighten securely.
Assemble Stem: Connect stem sections (if multiple) by twisting or screwing together.
Route Cord: Thread the power cord through the center of the stem if required by design.
Attach Socket: Secure the bulb socket assembly to the top of the stem.
Attach Shade: Place the lampshade over the socket and secure with the provided finial or clips.
Final Check: Ensure all connections are tight and the lamp stands upright without wobbling.

Tip: Assemble with a partner for easier handling of taller sections.

Specifications

Model: LÅGTRYCK 205.132.02
Type: Floor Lamp
Height: Approximately [Insert Height] inches/cm (assembled)
Base Diameter: Approximately [Insert Diameter] inches/cm
Bulb: Socket type E26/E27 (or as specified), Max [Insert Wattage] W
Voltage: 120V AC, 60Hz
Cord Length: Approximately [Insert Length] feet/meters
Materials: [e.g., Steel, Plastic, Fabric]
Weight: Approximately [Insert Weight] lbs/kg

Operation

Install Bulb: Ensure lamp is unplugged. Screw in compatible bulb of appropriate wattage. Do not overtighten.
Plug In: Insert plug into a standard wall outlet.
Turn On/Off: Use the switch on the power cord or base.
Positioning: Place lamp in desired location for ambient light. Ensure cord is not a tripping hazard.

Note: The lamp may become warm during use. This is normal. Allow to cool before handling.

Care & Maintenance

Unplug lamp before any maintenance.

Cleaning: Wipe exterior with a soft, dry cloth. For fabric shades, use a vacuum brush attachment.
Bulb Replacement: Unplug, allow old bulb to cool, unscrew, and replace with new compatible bulb.
Storage: Disassemble if possible for compact storage. Keep in a dry place.

CAUTION! Do not use liquid cleaners, abrasives, or chemicals on any part of the lamp. Do not immerse in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off; faulty outlet	Replace bulb; ensure plug is secure; check switch; try another outlet.
Lamp flickers	Loose bulb; faulty bulb; loose connection	Turn off, unplug, and tighten bulb. Try a different bulb.
Lamp wobbles	Uneven surface; base not secure; loose stem	Place on level floor; tighten all assembly bolts and connections.
Overheating	Bulb wattage too high; poor ventilation	Use bulb of correct max wattage. Ensure lamp is not covered.
Switch not working	Faulty switch; internal wiring issue	Unplug and discontinue use. Contact IKEA support.

Electrical Issues: If you suspect an electrical fault (smell, spark, damaged cord), unplug immediately and do not use.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at IKEA stores.

Recycling: Dispose of the lamp and bulb according to local electronic waste regulations. Do not dispose of with household trash.

For Support: Visit the IKEA website at www.ikea.com or contact your local IKEA store. Have the model number (205.132.02) and date of purchase ready.