IKEA LÄRBRO 705.072.08 Mirror instructions manual

The IKEA LÄRBRO 705.072.08 is a wall-mounted mirror designed for bathroom or hallway use, featuring a sturdy frame, safety backing, and included mounting hardware. Below are key sections for safety, features, installation, setup, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Included Parts 4. Tools Required 5. Installation Steps 6. Mounting & Leveling 7. Care & Cleaning 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Tempered glass mirror, solid frame, wall mounting brackets, safety backing film, and mounting hardware kit.

FeatureDescription
Frame MaterialSturdy, moisture-resistant finish
Mirror TypeTempered safety glass with protective backing
Mounting TypeWall-mounted (fixed position)
Included HardwareWall anchors, screws, brackets, template
Safety FeatureProtective film to prevent shattering
Weight CapacityDesigned for mirror weight only

Safety Information

Read all instructions before assembly and installation.

  1. Use only supplied hardware; do not substitute.
  2. Mount only to solid wall (studs or masonry).
  3. Ensure wall can support mirror weight.
  4. Keep away from direct heat sources and high humidity areas unless rated for bathroom use.
  5. Do not hang items on mirror frame.

WARNING! Mirror is heavy; use two people for handling. Ensure secure mounting to prevent falling.

Included Parts

Check: Verify all parts are included before starting.

Tools Required

Tip: Gather tools before beginning installation.

Installation Steps

  1. Locate Studs: Use stud finder to locate solid mounting points.
  2. Position Template: Tape template to wall at desired height; use level to ensure straight.
  3. Mark Holes: Mark drilling points through template holes.
  4. Drill Holes: Drill holes at marked points; insert wall anchors if not drilling into studs.
  5. Attach Brackets: Secure brackets to wall using screws and anchors.
  6. Hang Mirror: With help, lift mirror and hook onto brackets.
  7. Secure Mirror: Ensure mirror is firmly seated on brackets; check stability.

CAUTION! Do not overtighten screws; avoid damaging frame.

Mounting & Leveling

Use level during template placement and after hanging mirror.

  1. Adjust brackets before final tightening if needed.
  2. Check mirror is level after hanging; slight adjustments can be made by shifting on brackets.
  3. Ensure no gaps between mirror back and wall.

Tip: For plaster or drywall, use appropriate anchors for weight.

Care & Cleaning

Use soft, lint-free cloth; avoid abrasive cleaners.

  1. Dust with dry cloth regularly.
  2. For smudges, use glass cleaner sprayed onto cloth, not directly on mirror.
  3. Wipe gently; avoid excessive moisture on frame.
  4. Do not use harsh chemicals or scrapers.

CAUTION! Do not spray liquids directly on mirror edges or frame.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Mirror not levelUneven brackets or wallLoosen brackets, adjust with level, re-tighten.
Brackets looseInsufficient wall supportEnsure anchored in stud or use heavier-duty anchors.
Frame damageShipping or handlingContact IKEA for replacement parts.
Mirror cloudyMoisture behind mirrorEnsure proper ventilation; check for sealing issues.
Hardware missingPackage incompleteContact IKEA customer service.

Note: For persistent issues, consult professional installer.

Warranty & Support

Limited warranty covers defects in materials and workmanship. Proof of purchase required.

For support, visit www.ikea.com or contact IKEA customer service at 1-888-888-4532.

Recycling: Dispose of packaging and mirror responsibly according to local regulations.

IKEA LÄRBRO 705.072.08 Mirror instructions manual © - All Rights Reserved 2025