IKEA KYRRE 004.915.31 Stool instructions manual

The IKEA KYRRE stool is a versatile and sturdy stool made from solid birch, designed for everyday use in various rooms. It features a simple, modern design, a smooth surface, and a weight capacity of up to 110 kg. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Tools Included 2. Safety Instructions 3. Step-by-Step Assembly 4. Care & Maintenance 5. Weight & Dimensions 6. Troubleshooting 7. Warranty & Support

Parts & Tools Included

Before assembly, check that all parts are present and undamaged.

Part Description	Quantity	Image Reference
Stool seat (solid birch)	1	A
Stool leg	3	B
Metal screw with washer	3	C
Allen key (4 mm)	1	D
Instruction manual	1	-

Note: All screws and tools needed are included.

Safety Instructions

Read all instructions before assembly and use.

Assembly Surface: Assemble on a soft, clean surface to avoid scratches.
Tool Use: Use only the provided Allen key. Do not overtighten screws.
Weight Limit: Maximum load 110 kg. Do not stand or jump on the stool.
Stability: Ensure all legs are firmly attached and the stool sits level before use.
Children: Supervise children to prevent tipping or misuse.

WARNING! Incorrect assembly may cause instability and risk of injury.

Step-by-Step Assembly

Estimated assembly time: 10-15 minutes.

Step 1: Place the stool seat (A) upside down on a protected surface.
Step 2: Take one leg (B) and align it with the pre-drilled hole on the underside of the seat. The wider part of the leg should face outward.
Step 3: Insert a metal screw with washer (C) through the leg and into the seat. Hand-tighten initially.
Step 4: Repeat Step 2 and 3 for the remaining two legs, spacing them evenly.
Step 5: Using the Allen key (D), firmly tighten all three screws. Do not overtighten to avoid stripping the wood.
Step 6: Turn the stool right-side up. Check stability by gently rocking it. All legs should touch the floor evenly.

Tip: If the stool wobbles, slightly loosen the screws, reposition the legs for balance, and retighten.

Care & Maintenance

Proper care will extend the life of your stool.

Cleaning: Wipe with a damp cloth and mild soap. Dry immediately. Do not soak or use abrasive cleaners.
Wood Care: The birch surface may be treated with IKEA wood oil or beeswax for protection (optional).
Inspection: Periodically check screw tightness. Retighten if necessary.
Storage: Store in a dry place. Avoid prolonged exposure to direct sunlight or high humidity.

CAUTION! Never use steel wool or harsh chemicals on the wood surface.

Weight & Dimensions

Product Name: KYRRE Stool
Article Number: 004.915.31
Overall Height: 45 cm
Seat Diameter: 30 cm
Seat Thickness: 3 cm
Weight Capacity: 110 kg
Product Weight: 2.1 kg
Material: Solid birch, Birch veneer, Steel screw
Color: Birch natural

Troubleshooting

Issue	Possible Cause	Solution
Stool wobbles	Uneven floor; legs not tightened evenly	Loosen screws slightly, ensure all legs touch floor, retighten evenly. Place on a level surface.
Screw won't tighten	Threads cross-threaded or stripped	Do not force. Remove screw, realign leg, and start again. If stripped, contact IKEA for a replacement part.
Leg doesn't align	Incorrect orientation	Ensure the wider part of the leg faces outward from the seat center.
Wood crack or split	Overtightening; manufacturing defect	Stop assembly. Contact IKEA customer service for a replacement.

Warranty & Support

IKEA products come with a warranty against manufacturing defects. The specific warranty period may vary by region.

Warranty: Refer to your IKEA guarantee for terms. Keep your receipt.
Missing Parts: Visit your local IKEA store or contact customer service with the article number (004.915.31).
Online Support: Assembly videos and guides available at www.ikea.com.
Contact: IKEA Customer Support: 1-800-434-4532 (US) or your local IKEA store.

Recycling: At end of life, disassemble and recycle materials according to local regulations.