IKEA KURA 405.284.53 Bed Tent instructions manual

The IKEA KURA 405.284.53 Bed Tent is a fabric canopy designed to transform the IKEA KURA reversible bed into a cozy, enclosed play or sleep space. It features a lightweight, breathable polyester fabric, a simple attachment system with straps and hooks, and a roll-up door with ties. Below are key sections for safety, features, assembly, setup, use, care, and troubleshooting.

Features at a Glance

Key components: Polyester fabric canopy, attachment straps with hooks, roll-up door with ties, ventilation panels.

Parts & Tools Included

Unpack and verify all parts are present before starting.

1. Fabric Canopy (1): Main tent structure with pre-attached straps.
2. Hook Straps (4): Adjustable straps with plastic hooks.
3. Instruction Manual (1): This document.

WARNING! Keep plastic packaging away from children to avoid suffocation hazard.

Safety Instructions

Read all instructions before assembly and use.

1. For use only with the IKEA KURA reversible bed. Do not modify.
2. Ensure the KURA bed is fully assembled and stable before attaching the tent.
3. Designed for domestic indoor use only. Not a safety device.
4. Do not allow children to climb on or hang from the tent fabric or straps.
5. Keep away from open flames, heaters, and other heat sources.
6. Regularly check that all hooks and straps are securely fastened.

CAUTION! Choking hazard - small parts. Not for children under 3 years.

Assembly Instructions

Assemble the IKEA KURA bed according to its manual first. The tent requires no tools.

1. Unfold the fabric canopy completely on a clean, flat surface.
2. Identify the four corner straps. Each has a plastic hook.
3. Locate the four upper corners of the KURA bed frame.
4. Proceed to the attachment steps in the next section.

Tip: Two people make assembly easier.

Attaching to KURA Bed

Follow these steps to securely attach the canopy to the bed frame.

1. Position the canopy over the bed so the door aligns with your desired opening side.
2. Take one hook strap and attach the plastic hook to the metal bed frame at one of the four top corners. Ensure it clicks securely onto the frame.
3. Repeat step 2 for the remaining three corners.
4. Once all hooks are attached, gently pull down on each strap to tension the canopy evenly. The fabric should be taut but not stretched excessively.
5. Adjust strap lengths if necessary for a snug, wrinkle-free fit.

WARNING! Ensure hooks are fully engaged on the frame to prevent detachment.

Setup & Adjustment

• Door Operation: Roll up the door fabric and secure it with the provided fabric ties.
• Ventilation: Ensure mesh panels are not blocked by bedding.
• Fit Adjustment: Loosen or tighten straps to remove fabric sag or wrinkles.
• Bed Position: The tent is designed for the KURA bed in the low position. For the high loft position, ensure the tent is clear of the ceiling.

Using the Bed Tent

Create a fun and private space for play, reading, or sleeping.

1. Access: Enter and exit through the roll-up door.
2. Ventilation: Keep the door rolled up or use mesh panels for air flow during extended use.
3. Play: Suitable for light play. Do not attach heavy items to the fabric.
4. Sleeping: Use with standard KURA bed mattress and bedding. Ensure the tent does not restrict breathing.
5. Lighting: Use battery-operated lights only. Do not use mains-powered lights or candles inside the tent.

WARNING! Never use heating devices, candles, or open flames inside or near the tent.

Care & Cleaning

Remove the tent from the bed before cleaning.

1. Surface cleaning: Use a soft brush or vacuum cleaner with a soft brush attachment to remove dust.
2. Spot cleaning: Dampen a clean cloth with mild soapy water. Gently wipe the soiled area. Use a clean, damp cloth to remove soap residue. Air dry completely.
3. Do not machine wash, machine dry, iron, bleach, or dry clean.
4. Do not use abrasive cleaners or solvents.

CAUTION! Fabric must be completely dry before reattaching to the bed to prevent mold.

Storage & Disassembly

To remove the tent for storage or bed cleaning:

1. Unhook all four plastic hooks from the bed frame.
2. Fold the fabric canopy neatly. Avoid sharp creases.
3. Store in a cool, dry place away from direct sunlight.
4. Do not store in a compressed state for long periods.

Tip: Store in the original packaging if available.

Specifications

• Article Number: 405.284.53
• Designer: IKEA of Sweden
• Material: 100% polyester (fabric), Polypropylene (hooks)
• Color: As per product line (e.g., white, gray, patterned)
• Max Load: Fabric not designed for load-bearing. Do not hang from or climb on.
• Compatibility: IKEA KURA reversible bed (all versions)
• Packaging: Flat-pack in polybag

Troubleshooting

Warranty: Refer to the IKEA warranty terms for your country.

Customer Service: Contact IKEA customer support or visit www.IKEA.com for spare parts or further assistance.