IKEA KURA 205.061.50 Bed Curtain instructions manual
The IKEA KURA 205.061.50 Bed Curtain is designed to fit the IKEA KURA reversible bed, creating a cozy, private space for children. Made from durable, washable polyester fabric with a playful pattern, it includes a curtain rod, mounting brackets, and all necessary hardware for easy assembly. Below are key sections for safety, features, installation, setup, care, and troubleshooting.
Features at a Glance
Key components: Polyester curtain panel, adjustable curtain rod, mounting brackets, screws, and assembly tool.
| Feature | Description |
|---|
| Curtain Fabric | 100% polyester, machine washable, playful pattern |
| Curtain Rod | Adjustable metal rod, fits KURA bed frame |
| Mounting Brackets | 2 brackets for secure attachment to bed posts |
| Hardware | Screws and assembly tool included |
| Design | Creates enclosed, private sleeping/play area |
| Compatibility | Designed specifically for IKEA KURA reversible bed |
Parts Included
Unpack and verify all parts before starting assembly.
- Curtain panel (1 piece)
- Adjustable curtain rod (1 piece)
- Mounting brackets (2 pieces)
- Screws (4 pieces)
- Assembly tool (Allen key)
- Instruction manual
WARNING! Keep small parts away from children during assembly to prevent choking hazard.
Safety Information
Ensure safe installation and use.
- Assemble on a clean, flat surface with adequate space.
- Use two people for assembly to prevent injury or damage.
- Ensure bed is stable and on level ground before mounting curtain.
- Do not allow children to climb or hang on the curtain rod.
- Regularly check that all screws and brackets are tight and secure.
CAUTION! The curtain is not a safety barrier and does not prevent falls from the bed.
Assembly Instructions
Follow these steps for proper assembly. Estimated time: 15-20 minutes.
- Prepare Area: Clear space around the KURA bed.
- Identify Parts: Lay out all components as listed in section 3.
- Assemble Rod: Extend the adjustable curtain rod to match the width of your bed frame. Do not over-extend.
- Attach Brackets: Slide one mounting bracket onto each end of the rod. Ensure the bracket opening faces downward.
- Position: Hold the rod with brackets at the desired height on the bed posts.
Tip: Refer to the included pictorial guide for visual reference during assembly.
Mounting the Curtain Rod
Secure the rod to the KURA bed posts.
- Align a bracket with a bed post. The bracket should wrap around the post.
- Insert a screw through the bracket hole and into the pre-drilled hole on the bed post (if available).
- Using the Allen key, tighten the screw firmly but do not overtighten.
- Repeat for the second bracket on the opposite bed post.
- Gently tug on the rod to ensure it is securely mounted and does not wobble.
WARNING! Ensure the bed is in its final position before mounting, as moving it afterward may loosen the brackets.
Hanging the Curtain
Attach the curtain panel to the rod.
- Unfold the curtain panel completely.
- Locate the header tape (top edge) with built-in loops or channels.
- Slide the curtain onto the rod by threading the rod through the loops/channels.
- Evenly distribute the fabric along the length of the rod.
- Ensure the curtain hangs freely and can be opened and closed smoothly.
Tip: For easier threading, slightly collapse the adjustable rod, thread the curtain, then re-extend it.
Adjustments & Fitting
Fine-tune the curtain for optimal fit and function.
- Rod Height: Loosen bracket screws to adjust rod height, then retighten.
- Rod Width: The rod can be extended or collapsed within its safe range to fit the bed snugly.
- Curtain Fullness: Fabric can be gathered or spread evenly along the rod.
- Opening/Closing: Practice opening and closing the curtain to ensure it moves without catching on the bed frame.
Note: The curtain is designed for the KURA bed; modifications for other beds are not recommended.
Care & Cleaning
Maintain your curtain for long-lasting use.
- Regular Dusting: Use a soft brush or vacuum with a soft brush attachment.
- Machine Washing: Remove curtain from rod. Wash separately in cold water on gentle cycle. Use mild detergent.
- Drying: Tumble dry on low heat or air dry. Do not iron.
- Rod & Brackets: Wipe with a dry cloth. Do not use abrasive cleaners.
CAUTION! Do not bleach. Fabric may shrink slightly if washed in hot water or dried on high heat.
Specifications
- Product Name: KURA Bed Curtain
- Article Number: 205.061.50
- Material (Curtain): 100% polyester
- Material (Rod/Brackets): Steel, powder-coated
- Color/Pattern: As per specific variant (e.g., white with stars)
- Weight: Approximately 1.5 kg (total package)
- Compatibility: IKEA KURA reversible bed frame
- Wash Care: Machine washable at 40°C (104°F)
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Rod is loose or wobbly | Brackets not tight enough | Tighten all screws with the Allen key. Ensure brackets are correctly positioned on bed posts. |
| Curtain does not slide smoothly | Fabric caught or rod misaligned | Redistribute fabric evenly. Check that rod is level and parallel to the floor. |
| Curtain is too short/long | Rod height incorrect | Adjust rod height via bracket screws. The curtain should just clear the floor. |
| Brackets won't attach to bed post | Bed post too thick or no pre-drilled hole | Ensure you have the KURA bed. Do not force brackets. Contact IKEA support if parts seem incompatible. |
| Fabric fading or shrinking | Incorrect washing/drying | Follow care instructions: cold wash, gentle cycle, low heat dry or air dry. |
Missing Parts? Contact IKEA customer service with your article number (205.061.50).
Support: Visit www.ikea.com or contact your local IKEA store.
IKEA KURA 205.061.50 Bed Curtain instructions manual © - All Rights Reserved 2025