IKEA KUNGSHULT 294.161.31 Lamp Shade instructions manual

The IKEA KUNGSHULT 294.161.31 is a stylish and functional lamp shade designed for use with compatible IKEA lamp bases. This manual provides essential information for safe unpacking, assembly, installation, use, and maintenance of your lamp shade. Follow all instructions carefully to ensure proper function and longevity.

1. Safety Information 2. Package Contents & Tools Needed 3. Assembly Instructions 4. Installation on Lamp Base 5. Specifications 6. Care & Cleaning 7. Troubleshooting 8. Warranty & Support

Safety Information

Read all safety instructions before assembly and use.

Use only with compatible IKEA lamp bases and recommended light bulbs (max wattage specified).
Ensure the lamp is unplugged and the bulb is cool before assembly, installation, or cleaning.
Do not use the lamp shade if it is damaged.
Keep away from children during assembly.
Do not place the lamp near heat sources, water, or in damp locations unless specifically rated for such use.

WARNING! Risk of electric shock or fire if used with incorrect bulb wattage or incompatible base. Always use the lamp shade as intended.

Package Contents & Tools Needed

Open the package and verify all parts are present.

Part Description	Quantity	Image Reference
KUNGSHULT Lamp Shade (fabric/paper)	1	A
Metal wire frame (pre-assembled)	1	B
Mounting ring/socket holder	1	C
Instruction manual	1	-

Tools Needed: None. Assembly is tool-free.

Note: Lamp base and light bulb are sold separately.

Assembly Instructions

The lamp shade typically comes pre-assembled. If disassembled for packaging, follow these steps:

Unfold the frame: Gently expand the metal wire frame (Part B) to its full shape.
Attach the shade: Slide the fabric/paper shade (Part A) over the frame, aligning the top opening with the frame's top ring.
Secure the shade: Ensure the shade is evenly stretched and sits securely on the frame. There may be a seam; align it at the back.
Attach mounting ring: Clip or screw the mounting ring (Part C) to the top center of the wire frame. This ring will connect to the lamp base.

CAUTION! Handle the shade material gently to avoid tearing. Do not force parts.

Installation on Lamp Base

To install the assembled shade onto a compatible IKEA lamp base:

Ensure the lamp is UNPLUGGED and any existing bulb is COOL and removed.
Locate the bulb socket on the lamp base.
Align the mounting ring (Part C) of the shade over the bulb socket.
Push the shade down gently until it clicks or sits firmly on the base. Some models may require a slight twist to lock.
Insert a recommended light bulb (see Specifications for max wattage) into the socket.
Plug in the lamp and test the light.

Tip: Do not overtighten. The shade should be stable but not under stress.

Specifications

Article Number: 294.161.31
Design Name: KUNGSHULT
Type: Lamp Shade
Material: Fabric/Paper over steel wire frame.
Dimensions (approx.): Height: XX cm, Width/Diameter: XX cm. (Refer to IKEA product page for exact dimensions).
Max Bulb Wattage: [e.g., 60W E26 or 13W LED equivalent]. Check label on shade or mounting ring.
Bulb Base Type: Standard (e.g., E26/E27).
Compatibility: Designed for specific IKEA lamp bases (e.g., HEKTAR, JANSJÖ, etc.).
Weight: XX kg

Care & Cleaning

Proper care will extend the life of your lamp shade.

Always unplug the lamp and let the bulb cool completely.
Dust regularly using a soft, dry cloth or a feather duster.
For fabric shades: Light stains may be spot-cleaned with a slightly damp cloth. Do not soak. Allow to dry fully before use.
For paper shades: Use dry cleaning methods only. Do not use liquids.
Do not use abrasive cleaners, chemicals, or solvents.

CAUTION! Never immerse the shade in water. Moisture can damage the material and the metal frame, and create an electrical hazard.

Troubleshooting

Issue	Possible Cause	Solution
Shade is loose or wobbly	Not properly locked onto base; mounting ring not secure.	Unplug lamp. Remove shade and re-attach, ensuring it clicks into place. Check that mounting ring is firmly attached to shade frame.
Shade is tilted	Frame bent during shipping/assembly; uneven installation.	Gently adjust the wire frame to straighten. Ensure the lamp base is on a level surface.
Light appears too dim or uneven	Bulb wattage too low; shade color is dark; bulb not centered.	Use a brighter bulb within max wattage limit. Ensure bulb is fully screwed in and centered under the shade.
Shade material sagging	Heat from high-wattage bulb; humidity damage.	Use a lower wattage or LED bulb that emits less heat. Keep lamp away from humid areas. The shade may not be recoverable if severely damaged.
Will not fit lamp base	Incompatible base.	Verify compatibility with IKEA product information. This shade is designed for specific IKEA bases.

Warranty & Support

This IKEA product is covered by IKEA's limited warranty. Refer to the IKEA warranty document for full terms and conditions.

For Assembly Help, Missing Parts, or Product Support:

Visit the IKEA website: www.ikea.com
Contact IKEA Customer Support: 1-800-434-IKEA (4532)
Visit your local IKEA store.

Recycling: At end of life, dispose of materials according to local regulations. Separate metal frame from shade material if possible.