IKEA KRYSSMAST 504.963.38 Floor Lamp instructions manual

The IKEA KRYSSMAST 504.963.38 is a modern floor lamp featuring a cross-shaped base for stability, an adjustable height mechanism, an integrated dimmer switch for customizable lighting, and an energy-efficient LED light source. It is designed for indoor residential use and requires assembly. Below are key sections for safety, features, assembly, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Safety Instructions 4. Assembly Instructions 5. Installation & Placement 6. Operation & Controls 7. Specifications 8. Care & Cleaning 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Cross-shaped metal base, adjustable height pole, fabric or metal shade, integrated dimmer switch, LED bulb (included), power cord with plug.

Feature	Description
Cross-shaped base	Provides enhanced stability and prevents tipping
Adjustable height	Allows customization of lamp height for different lighting needs
Integrated dimmer	Rotary or touch dimmer for adjusting light intensity
LED light source	Energy-efficient, long-lasting bulb included (non-replaceable or specific type)
Shade material	Fabric or metal, designed to diffuse light evenly
Power cord	Standard length with safety plug
On/Off switch	Located on cord or base

Parts Included

Unpack and verify all parts before assembly. Contact IKEA if any parts are missing.

Cross-shaped base (1 piece)
Adjustable pole sections (2-3 pieces)
Lamp shade
LED light unit (pre-installed or separate)
Hardware pack (screws, bolts, washers)
Power cord with plug
Instruction manual

WARNING! Keep small parts away from children to avoid choking hazard.

Safety Instructions

Read all instructions before assembly and use.

Use only with specified voltage (120V AC).
Do not use outdoors or in damp locations.
Ensure lamp is placed on a stable, level surface.
Do not cover the lamp shade or place near flammable materials.
Disconnect from power before cleaning or maintenance.
Do not attempt to replace LED bulb if non-replaceable; contact IKEA for service.

CAUTION! Risk of electric shock if used improperly. Do not modify cord or plug.

Assembly Instructions

Follow steps in order. Use included tools if provided.

Attach cross-shaped base to the bottom pole section using provided screws.
Connect additional pole sections by twisting or screwing together.
Route the power cord through the center of the pole sections.
Attach the lamp shade to the top pole section, ensuring it is secure.
Connect the LED light unit to the top pole if not pre-installed.
Secure all connections and tighten screws firmly.
Plug the power cord into a wall outlet.

Tip: Assemble on a soft surface to avoid scratching parts.

Installation & Placement

Location: Place in living room, bedroom, or office. Ensure at least 3 feet from heat sources.
Stability: Ensure all feet of the cross base are in contact with the floor.
Height Adjustment: Loosen locking mechanism, adjust pole to desired height, and retighten.
Cord Management: Keep cord away from walkways to prevent tripping.

Operation & Controls

Access controls via integrated switch or dimmer.

On/Off: Use switch on cord or base. Dimmer: Rotate or touch to adjust brightness from low to high.

Adjust height: Loosen pole lock, slide to desired position, tighten lock.

Note: Allow lamp to cool before adjusting height or moving.

Specifications

Model: KRYSSMAST 504.963.38
Dimensions (assembled): Height: Adjustable from 40" to 60", Base width: 20"
Light Source: Integrated LED, 800 lumens, 3000K warm white
Power Consumption: 10W
Voltage: 120V AC, 60Hz
Materials: Steel base and pole, fabric/metal shade
Weight: 8.8 lbs (4 kg)
Certifications: UL Listed, ETL certified

Care & Cleaning

Unplug lamp before cleaning. Use dry, soft cloth for shade and base. For stubborn stains, use mild soap and damp cloth; dry immediately.

CAUTION! Do not immerse in water or use abrasive cleaners. Do not spray liquids directly on lamp.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power outlet issue / loose connection	Check outlet with another device; ensure plug is fully inserted; check cord for damage.
Light flickers	Loose bulb / dimmer compatibility	Ensure LED unit is secure; if dimmer is used, ensure it is compatible with LED.
Lamp unstable	Base not fully assembled / uneven floor	Tighten all base screws; place on level surface.
Dimmer not working	Faulty dimmer / incorrect operation	Rotate dimmer fully to click on; if unresponsive, contact IKEA.
Overheating	Ventilation blocked / excessive use	Ensure shade is not covered; allow lamp to cool; do not use for extended periods at max brightness.

Reset: Unplug for 30 seconds, then plug back in.

Warranty & Support

IKEA limited warranty: Covers defects in materials and workmanship for a specified period from date of purchase. Keep receipt for warranty claims. For support, visit www.ikea.com or contact IKEA customer service at 1-888-888-4532.

Recycling: Dispose of according to local electronic waste regulations. LED light source contains materials that require special handling.