IKEA KRYSSMAST 304.963.39 Table Lamp instructions manual

The IKEA KRYSSMAST 304.963.39 is a modern table lamp featuring a sleek metal base, adjustable shade, energy-efficient LED bulb (included), touch-sensitive dimmer control, and a compact design suitable for desks, bedside tables, or shelves. It operates on 120V AC, 60Hz. Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Metal base, adjustable fabric shade, integrated LED module, touch-sensitive dimmer, power cord with in-line switch.

Package Contents

Unpack and verify all parts are included.

1. Metal lamp base (1 piece)
2. Fabric lamp shade (1 piece)
3. LED light module (pre-installed)
4. Power cord with plug and switch (1 piece)
5. Instruction manual (this document)
6. Mounting hardware (if applicable)

WARNING! Check for damage before assembly. Do not use if any part is damaged.

Assembly Instructions

Follow these steps to assemble your lamp.

1. Place the metal base on a flat, stable surface.
2. If separate, attach the shade to the base by aligning the brackets and tightening the provided screw (if any).
3. Ensure the LED module is securely seated in the socket.
4. Route the power cord neatly from the base to your outlet.
5. Plug the cord into a standard 120V AC outlet.

CAUTION! Assemble on a soft surface to avoid scratching. Do not overtighten screws.

Specifications

• Model: KRYSSMAST 304.963.39
• Light Source: Integrated LED, non-replaceable (in case of failure, entire module may need replacement)
• Brightness: Adjustable, up to 600 lumens
• Color Temperature: 2700K (Warm White)
• Power Consumption: 7W max
• Input Voltage: 120V AC, 60Hz
• Cord Length: 6 feet (1.8 meters)
• Dimensions (HxW): Approx. 15" x 8" (38 cm x 20 cm)
• Weight: 3.3 lbs (1.5 kg)

Controls and Operation

Touch Control: Tap the metal base or designated touch area to turn the lamp on/off. Hold your finger on the touch area to dim or brighten the light.

In-line Switch: The switch on the power cord provides a secondary on/off control. For best dimming performance, use the touch control.

Tip: The lamp may have a memory function, returning to the last brightness setting when turned on.

Bulb Replacement

This lamp uses an integrated, non-user-replaceable LED module.

1. Unplug the lamp from the electrical outlet and allow it to cool completely.
2. If the LED fails and the lamp is under warranty, contact IKEA for a replacement module or instructions.
3. Do not attempt to open the light module or replace it with a standard bulb, as this will damage the lamp and void the warranty.

WARNING! Risk of electric shock. Always unplug before attempting any inspection.

Safety Information

Read all instructions before use.

• Use only with 120V AC, 60Hz power supply.
• Do not use outdoors or in damp/wet locations.
• Keep away from children. This is not a toy.
• Do not cover the lamp or place flammable materials near it.
• Do not look directly at the LED light source.
• If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent.

Care & Cleaning

Unplug the lamp and allow it to cool before cleaning.

1. Wipe the metal base and shade with a soft, dry cloth.
2. For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners or chemicals.
3. Ensure no moisture enters any openings or the electrical parts.

CAUTION! Never immerse the lamp in water or other liquids.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in the packaging or available at www.ikea.com for specific terms, duration, and conditions of coverage for your country/region.

For service or warranty claims, contact IKEA customer service with your proof of purchase (receipt).

Troubleshooting

Disposal: Dispose of according to local regulations for electronic waste. Do not dispose of with household trash.

Contact: IKEA Customer Service: 1-888-888-4532 (IKEA) or visit www.ikea.com.