IKEA KROKHOLMEN 803.364.66 Coffee table instructions manual

The IKEA KROKHOLMEN 803.364.66 is a modern coffee table featuring a sleek design with a tempered glass top and a sturdy metal frame. This manual provides essential information for safe assembly, proper use, care, and maintenance of your coffee table. Below are key sections covering safety warnings, parts list, assembly steps, care instructions, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Product Specifications 5. Care & Maintenance 6. Weight & Load Capacity 7. Troubleshooting 8. Warranty Information 9. Contact & Support

Parts & Hardware

Before assembly, check that you have all parts listed below. The hardware pack is included in the packaging.

Part DescriptionQuantityImage Reference
Tempered Glass Table Top1A
Metal Frame Side Panel (Left)1B
Metal Frame Side Panel (Right)1C
Metal Frame Connector Bar (Front)1D
Metal Frame Connector Bar (Rear)1E
Plastic Protective Caps (for feet)4F
Hex Key (Allen Wrench) 4mm1G
Assembly Screws (M6 x 20mm)8H
Frame Connector Bolts4I

Safety Instructions

Read all instructions before assembly. Keep for future reference.

  1. Assembly Surface: Assemble on a soft, clean surface (e.g., carpet or blanket) to prevent scratches.
  2. Glass Handling: The glass top is heavy and fragile. Handle with care. Use two people to lift and position it.
  3. Tool Use: Use only the provided hex key. Do not overtighten screws.
  4. Child Safety: Do not allow children to climb or play on the table. The glass top can break under impact.
  5. Placement: Place the table on a level, stable floor. Do not place on uneven surfaces.

WARNING! The glass top can shatter if struck with force. Avoid placing heavy, sharp, or extremely hot objects directly on the glass without protection.

Assembly Steps

Estimated assembly time: 20-30 minutes. Recommended: 2 people.

  1. Step 1: Unpack all parts and lay them out. Identify each part using the included diagram.
  2. Step 2: Attach the left (B) and right (C) side panels to the front connector bar (D). Use 2 screws (H) per side. Do not fully tighten yet.
  3. Step 3: Attach the rear connector bar (E) to the side panels using the remaining screws. Ensure the frame is square, then tighten all screws firmly with the hex key.
  4. Step 4: Turn the assembled frame upright. Attach the 4 plastic protective caps (F) to the bottom of each leg.
  5. Step 5: Carefully lift the glass top (A) with another person. Align it with the frame. Lower it gently onto the frame. Ensure it is centered and sits securely.
  6. Step 6: Check all connections are tight. Wipe the glass clean with a soft, dry cloth.

CAUTION! Do not drag the table across the floor after assembly. Lift it to move.

Product Specifications

Care & Maintenance

Proper care will extend the life and appearance of your table.

Glass Top:

  1. Clean with a soft, lint-free cloth dampened with a mild glass cleaner or a solution of vinegar and water.
  2. Wipe dry immediately with a separate dry cloth to prevent streaks.
  3. Avoid abrasive cleaners, scouring pads, or harsh chemicals.

Metal Frame:

  1. Dust regularly with a soft, dry cloth.
  2. For marks, use a damp cloth with mild soapy water. Dry thoroughly.
  3. Do not use wax, polish, or silicone-based products on the frame.

General: Protect the surface from extreme heat (e.g., hot pans, curling irons) and sharp objects.

Weight & Load Capacity

The table is designed for typical living room use.

Tip: Use coasters for drinks and placemats for decorative items to protect the glass surface.

Troubleshooting

IssuePossible CauseSolution
Table wobblesUneven floor; screws not tight; frame not squareCheck floor level. Tighten all frame screws. Ensure frame was assembled squarely on a flat surface.
Glass top slides or feels unstableNot centered on frame; frame not levelLift glass and reposition it centered on the frame. Check that all four legs touch the floor evenly.
Scratches on glassAbrasive cleaning or dragging objectsMinor surface scratches may be reduced with a specialized glass polishing compound. Prevent future scratches by using coasters and lifting objects.
Missing hardwarePackaging errorContact IKEA customer service for a replacement hardware pack. Quote article number 803.364.66.
Rust on metal frameExposure to moistureLight surface rust can be cleaned with a mild abrasive pad and soapy water. Dry thoroughly. Keep table in a dry environment.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the "IKEA Guarantee" booklet or available at www.ikea.com.

Contact & Support

For assembly help, missing parts, or other product inquiries:

Recycling: At end of life, disassemble and recycle materials according to your local regulations. Glass, metal, and plastic can often be recycled separately.

IKEA KROKHOLMEN 803.364.66 Coffee table instructions manual © - All Rights Reserved 2025