IKEA KRILLE 094.162.12 Leg instructions manual

The IKEA KRILLE 094.162.12 is a set of furniture legs designed for compatibility with various IKEA tabletops and storage units. These legs provide adjustable height, sturdy construction, and a modern finish. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Installation Steps 5. Height Adjustment 6. Weight Capacity & Compatibility 7. Care & Maintenance 8. Safety Information 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Adjustable legs, mounting plates, screws, and protective foot pads.

Feature	Description
Adjustable Height	Legs can be adjusted to different lengths for leveling on uneven floors
Mounting Plate	Pre-drilled metal plate for secure attachment to furniture
Protective Foot Pads	Prevents scratching on floors and provides stability
Material	Steel construction with powder-coated finish
Threaded Inserts	Allows for easy height adjustment via rotating leg section
Compatibility	Designed for IKEA tabletops (e.g., LINNMON, LAGKAPTEN) and storage units

Package Contents

Unpack and verify all parts are present before starting assembly.

4x Adjustable Legs (KRILLE 094.162.12)
4x Mounting Plates
16x Screws (for attaching plates to furniture)
4x Protective Foot Pads
1x Hex Key (Allen wrench)
1x Instruction Manual

WARNING! Do not discard packaging until assembly is complete and all parts are verified.

Tools Required

Tools needed for installation (not included):

Phillips screwdriver (optional, screws can be hand-tightened)
Measuring tape (for even placement)
Pencil (for marking drill points if necessary)

CAUTION! Use appropriate tools to avoid damaging screws or furniture surface.

Installation Steps

Step 1: Place furniture top upside down on a soft, protected surface.
Step 2: Position mounting plates at each corner, aligning with pre-drilled holes (if present) or marking positions.
Step 3: Secure each mounting plate using 4 screws per plate. Do not overtighten.
Step 4: Screw leg into the threaded insert on the mounting plate by hand until snug.
Step 5: Attach protective foot pad to the bottom of each leg.
Step 6: Carefully turn the assembled piece upright.
Step 7: Adjust leg height as needed (see Height Adjustment section).

Height Adjustment

Each leg can be independently adjusted to compensate for uneven floors.

Loosen the leg by rotating it counterclockwise (left) to lower.
Rotate the leg clockwise (right) to raise it.
Use a level on the tabletop surface to ensure all legs are adjusted evenly.
Once level, ensure all legs are tightened securely to prevent wobbling.

Tip: Make small adjustments and check stability frequently.

Weight Capacity & Compatibility

Maximum Load: 50 kg (110 lbs) per leg, distributed evenly.

Compatible IKEA Products:

Tabletops: LINNMON, LAGKAPTEN, GERTON
Cabinets: KALLAX, EKET (with adapter plates)
Desks: MICKE, ALEX (when used as tabletop support)

Note: Not recommended for use with glass tops or on uneven surfaces without adjustment.

Care & Maintenance

Clean with a dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.

CAUTION! Do not expose to excessive moisture or extreme temperatures. Check tightness of screws and leg adjustments periodically.

Safety Information

Ensure the furniture is placed on a stable, level surface. Do not exceed maximum weight capacity. Keep away from heat sources and direct sunlight for prolonged periods. Secure furniture to wall if used in areas with risk of tipping (e.g., children's rooms).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Leg wobbles	Not fully tightened or uneven floor	Adjust height of individual leg; tighten securely.
Scratching floor	Protective foot pad missing or worn	Replace foot pad; ensure it is properly attached.
Difficulty screwing in leg	Threads misaligned or cross-threaded	Unscrew completely and restart, aligning threads carefully.
Mounting plate loose	Screws not tightened enough	Tighten screws evenly; do not overtighten.
Furniture uneven	Legs adjusted to different heights	Use level to readjust all legs to same height.

Note: If problems persist, contact IKEA customer support.

Warranty & Support

IKEA limited warranty applies. For product support, assembly help, or spare parts, visit www.ikea.com or contact your local IKEA store. Keep your receipt as proof of purchase.