IKEA KORNSNÖ 004.337.20 Night Light instructions manual

The IKEA KORNSNÖ 004.337.20 is a decorative, low-intensity night light designed for safe, ambient lighting. It features a corn-shaped design, uses a low-wattage bulb (included), operates on standard household voltage, and includes a simple on/off switch or plug-in sensor for automatic operation. Below are key sections for safety, features, installation, setup, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Parts Included 4. Installation & Setup 5. Operation 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Corn-shaped decorative housing, low-wattage bulb, power cord with plug, on/off switch or light sensor.

Feature	Description
Design	Decorative corn-shaped night light
Light Source	Integrated low-wattage bulb (included)
Power	Plug-in to standard wall outlet
Operation	Manual on/off switch or automatic light sensor
Light Output	Soft, ambient glow for night-time use
Safety	Cool-touch design, low heat emission

Safety Information

Read all instructions before use. Keep for future reference.

Intended for indoor use only. Do not use outdoors or in damp locations.
Use only with the provided bulb or an identical replacement.
Do not cover the night light or place near flammable materials.
Ensure the power outlet is easily accessible.
Unplug before cleaning or replacing the bulb.

WARNING! Risk of electric shock. Do not disassemble the unit. Keep away from children and pets.

Parts Included

1 x KORNSNÖ Night Light housing
1 x Low-wattage bulb (pre-installed)
1 x Power cord with plug
1 x Instruction manual (this document)

Note: Check that all parts are present before installation. Contact IKEA if anything is missing.

Installation & Setup

Simple plug-and-use installation.

Choose a location: Select a standard wall outlet in a dry, indoor area.
Plug in: Insert the power plug firmly into the wall outlet.
Operation mode: If equipped with a sensor, ensure it faces an open area. If manual, use the switch.
Test: The light should turn on (automatically in dark conditions if sensor-equipped, or manually via switch).

CAUTION! Do not force the plug. Ensure the outlet is not overloaded.

Operation

For models with sensor: Automatically turns on in low light and off in bright light. For manual models: Use the switch.

Automatic (if equipped): No user action needed. The sensor detects ambient light.
Manual: Flip the switch to ON for constant light, OFF to turn off.
To conserve energy, unplug when not in use for extended periods.

Tip: Place in hallways, bedrooms, or bathrooms for safe night-time navigation.

Care & Maintenance

Unplug before any maintenance.

Cleaning: Wipe the exterior with a dry, soft cloth. Do not use liquids or abrasive cleaners.
Bulb replacement: Unplug. Allow to cool. Gently remove old bulb and insert a new identical low-wattage bulb.
Storage: Store in a cool, dry place if not in use.

CAUTION! Never immerse in water. Do not use damaged cords or plugs.

Specifications

Model: KORNSNÖ 004.337.20
Input Voltage: 120V AC, 60Hz (or local standard)
Bulb Type: Integrated LED or low-wattage incandescent (included)
Power Consumption: Low energy usage (exact wattage as per local labeling)
Dimensions: Compact, corn-shaped design
Color: As per product variant (e.g., white, yellow)
Certifications: Complies with applicable safety standards

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power; faulty outlet; bulb failure	Check outlet with another device; ensure plug is secure; replace bulb if applicable.
Light stays on during day (sensor model)	Sensor blocked or faulty; very low light	Clear obstruction from sensor; relocate to area with normal day/night cycle.
Light flickers	Loose bulb; power fluctuation	Ensure bulb is seated properly (if replaceable). Try a different outlet.
Unit is warm to touch	Normal operation for some bulbs; prolonged use	This may be normal. Ensure nothing is covering the light. Unplug if excessively hot.
Sensor not responding	Dirty sensor; environmental factors	Gently clean sensor surface with dry cloth. Avoid direct light sources pointing at sensor.

Note: For persistent issues, discontinue use and contact support.

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty terms for details.

For product support, assembly questions, or spare parts:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your purchase receipt for warranty details.

Recycling: Dispose of according to local electronic waste regulations. Do not dispose of with household trash.