The IKEA KONSTRUERA 094.859.84 is a modular drawer unit designed for flexible storage solutions. It features a sturdy construction, smooth-gliding drawer runners, and a clean Scandinavian design. This manual provides essential information for safe assembly, installation, use, maintenance, and troubleshooting of your drawer unit. Below are key sections covering safety, parts identification, step-by-step assembly, installation, care, and support.
Key components included in the package: Drawer front panels, drawer boxes, drawer runners, side panels, back panel, mounting brackets, screws, cam locks, dowels, and assembly instructions.
| Component | Description |
|---|---|
| Drawer Front Panels | Finished front faces of the drawers |
| Drawer Boxes | Constructed from particleboard, form the drawer body |
| Drawer Runners | Side-mounted runners for smooth opening/closing |
| Side Panels | Left and right side panels of the drawer unit |
| Back Panel | Provides structural stability |
| Mounting Brackets | For securing the unit to a wall (if required) |
| Screws & Cam Locks | Hardware for connecting panels and components |
| Dowels | Wooden pegs for alignment during assembly |
Read all instructions before assembly. Ensure a clean, spacious work area.
WARNING! Serious or fatal crushing injuries can occur from furniture tipping over. Always secure this furniture to the wall using the provided anti-tip device.
You will need the following tools (not included):
Tip: Keep all packaging until assembly is complete to ensure no parts are missing.
Follow the numbered steps in the included pictorial guide. This is a summary of key assembly phases.
CAUTION! Do not overtighten screws or cam locks, as this may strip the particleboard.
For safety, the unit must be anchored to the wall.
Tip: If mounting into drywall without a stud, use appropriate hollow-wall anchors rated for the unit's weight.
Drawer Alignment: If a drawer is uneven or sticks, adjust the runner mounting screws slightly up or down.
Weight Capacity: Do not exceed the maximum load per drawer as specified in the Specifications section.
Soft-Close Feature: If equipped, the runners have a soft-close mechanism. Do not force drawers shut.
Locking (if applicable): Some models may include a locking function. Use the provided key to engage/disengage.
Unplug any adjacent electronics before cleaning.
CAUTION! Never use steam cleaners, as moisture can cause particleboard to swell and damage the unit.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Drawer sticks or is difficult to open | Misaligned runners; overloaded drawer | Adjust runner screws; remove excess weight; ensure nothing is obstructing the drawer path. |
| Drawer front is uneven | Front panel screws loose or misaligned | Loosen screws, align panel evenly with adjacent drawers/cabinet, then retighten. |
| Unit wobbles | Uneven floor; not secured to wall | Use shims under the unit to level; ensure wall anchor is properly installed and tight. |
| Cam lock won't tighten | Cam or dowel not fully engaged | Disassemble the joint, ensure dowel is fully inserted into the hole, and re-engage the cam lock. |
| Missing part or hardware | Packaging error | Contact IKEA customer service with your product number (094.859.84) for replacement parts. |
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores for full terms and conditions.
For Assembly Help: Visit the IKEA website and search for your product to view assembly videos and guides.
For Missing Parts or Support:
Recycling: At end of life, disassemble and recycle materials according to local regulations.