IKEA KOMPLEMENT 099.054.66 Hinge instructions manual

The IKEA KOMPLEMENT 099.054.66 is a concealed hinge designed for use with KOMPLEMENT wardrobe and storage systems. This hinge allows for smooth door operation with adjustable height, depth, and side pressure. It features a soft-closing mechanism, 110-degree opening angle, and is compatible with doors of specific thicknesses. Below are key sections for safety, features, installation, adjustment, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Installation Steps 5. Hinge Adjustment 6. Specifications 7. Compatibility 8. Care & Maintenance 9. Safety Information 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Hinge arm, mounting plate, cup, adjustment screws, cover cap.

FeatureDescription
Soft-closing mechanismPrevents door slamming for quiet operation
3-way adjustmentHeight, depth, and side pressure adjustments
Opening angle110 degrees for full access
Concealed designHides inside cabinet when door is closed
Quick-release featureAllows easy door removal without tools
MaterialSteel construction with nickel plating
Weight capacitySupports doors up to 15 kg (33 lbs)
Mounting system35mm cup diameter, standard European hinge
Cover cap includedMatches IKEA white finish
CompatibilityKOMPLEMENT wardrobe frames and doors

Package Contents

Unpack and verify all components before installation.

  1. Hinge arm with adjustment screws (2 pieces)
  2. Mounting plate with quick-release mechanism (2 pieces)
  3. 35mm hinge cups (2 pieces)
  4. Screws for cup mounting (8 pieces)
  5. Screws for plate mounting (8 pieces)
  6. White plastic cover caps (2 pieces)
  7. Installation template (1 piece)

WARNING! Do not discard packaging until all parts are verified. Missing parts may affect installation.

Tools Required

Gather necessary tools before beginning installation.

  1. #2 Phillips screwdriver or cordless drill with Phillips bit
  2. 35mm Forstner drill bit or hinge boring bit
  3. 5mm drill bit for pilot holes
  4. Tape measure
  5. Carpenter's square
  6. Pencil for marking
  7. Hammer (if using dowels)

CAUTION! Use appropriate safety equipment including safety glasses when drilling.

Installation Steps

Follow these steps for proper hinge installation.

  1. Mark hinge positions: Use template to mark cup positions on door. Standard position is 22mm from door edge.
  2. Drill hinge cups: Using 35mm bit, drill 12-13mm deep holes at marked positions.
  3. Install hinge cups: Insert cups into holes and secure with provided screws.
  4. Mark plate positions: On cabinet frame, mark positions 37mm from front edge.
  5. Install mounting plates: Secure plates to cabinet frame using provided screws.
  6. Attach hinge arms: Click hinge arms into mounting plates until they lock.
  7. Install door: Align hinge arms with cups and press until they click into place.
  8. Attach cover caps: Snap white caps onto hinge arms for finished look.

Tip: Install hinges with door supported on stable surface to prevent damage.

Hinge Adjustment

Three adjustment screws allow fine-tuning of door position.

Height adjustment (vertical): Turn screw A to raise or lower door position.

Depth adjustment (in/out): Turn screw B to move door closer to or further from frame.

Side pressure adjustment (left/right): Turn screw C to adjust door alignment and closing pressure.

Adjustment sequence: 1. Height, 2. Depth, 3. Side pressure. Make small adjustments (1/4 turns) and test door operation between adjustments.

Specifications

Compatibility

Designed for IKEA KOMPLEMENT wardrobe system components.

  1. Doors: KOMPLEMENT wardrobe doors 16-22mm thickness
  2. Frames: KOMPLEMENT wardrobe frames with side panels
  3. Overlay: Full overlay doors (covers entire frame front)
  4. Not compatible with: Partial overlay doors, inset doors, or non-KOMPLEMENT systems without modification

Note: Verify door and frame compatibility before purchase. Consult IKEA website or store for specific compatibility information.

Care & Maintenance

Regular maintenance ensures smooth operation and longevity.

  1. Cleaning: Wipe with dry cloth only. Do not use abrasive cleaners or chemicals.
  2. Lubrication: Apply small amount of silicone spray to moving parts if hinge becomes stiff.
  3. Tightening: Check screw tightness every 6 months. Do not overtighten.
  4. Inspection: Regularly check for wear, damage, or loose components.

CAUTION! Do not use oil-based lubricants as they attract dust and dirt.

Safety Information

Important safety precautions for installation and use.

  1. Always secure cabinet to wall according to IKEA instructions before installing doors.
  2. Ensure cabinet is on stable, level surface during installation.
  3. Use appropriate personal protective equipment when drilling.
  4. Do not exceed weight capacity of 15kg per hinge.
  5. Keep children away during installation.
  6. Check that doors are properly secured before regular use.

WARNING! Falling furniture can cause serious injury or death. Always secure to wall.

Warranty Information

IKEA limited warranty applies to this product. The IKEA warranty covers manufacturing defects for the specified period from date of purchase. Proof of purchase required. Warranty does not cover damage from improper installation, misuse, or normal wear and tear. For warranty claims, contact IKEA customer service with product number and receipt.

Troubleshooting

SymptomPossible CauseCorrective Action
Door doesn't close properlyMisaligned hingeAdjust height, depth, and side pressure screws
Door sagsLoose screws or weight overloadTighten all screws; verify weight limit
No soft-close functionDamaged mechanism or improper installationCheck hinge installation; replace if damaged
Door sticks or bindsFrame not square or hinge misalignedCheck frame squareness; realign hinge
Hinge feels stiffDirt in mechanism or needs lubricationClean with dry cloth; apply silicone spray
Quick-release not workingMechanism not engaged properlyRemove and reinstall hinge arm; ensure click sound
Door won't stay closedInsufficient side pressureAdjust side pressure screw clockwise
Visible gap at hinge sideDepth adjustment neededAdjust depth screw to move door closer to frame

Reset: Remove door and reinstall if adjustments don't solve issues.

Service: For missing parts or defects, contact IKEA customer service with product number 099.054.66.

IKEA KOMPLEMENT 099.054.66 Hinge instructions manual © - All Rights Reserved 2025