IKEA KOLBJÖRN 092.916.22 Cabinet instructions manual

The IKEA KOLBJÖRN 092.916.22 is a versatile wall-mounted cabinet designed for bathroom or hallway storage. It features a white, moisture-resistant finish, a mirrored door, adjustable shelves, and concealed hinges. Assembly is required. Below are key sections for safety, parts list, assembly instructions, mounting, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Mounting 6. Adjusting Shelves & Door 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Number	Description	Quantity
100001	Cabinet frame (white)	1
100002	Mirrored door with handle	1
100003	Adjustable shelf	2
100004	Back panel	1
200001	Concealed hinge set	2
200002	Wall mounting bracket	1 set
200003	Shelf support pins	8
300001	Screws (for wall mounting)	6
300002	Plugs (for solid walls)	6
300003	Cam locks and dowels	4 sets

Tools Required

You will need the following tools (not included):

Phillips screwdriver
Hammer (for wall plugs if needed)
Drill with appropriate drill bit (for mounting)
Level
Pencil
Tape measure

NOTE: Using the correct tools ensures proper assembly and safety.

Safety Instructions

Read all instructions before beginning assembly.

Work Area: Assemble on a clean, soft surface to avoid scratches.
Lifting: Cabinet is heavy; use two people for handling.
Wall Mounting: MUST be securely attached to wall studs or suitable masonry. Do not rely on drywall alone.
Children: Keep small parts away from children during assembly.
Mirror: Handle mirrored door with care to avoid breakage.

WARNING! Improper wall mounting can cause the cabinet to fall, resulting in serious injury or damage. Ensure mounting surface can support at least 4x the cabinet's weight.

Assembly Steps

Follow steps in order. Do not fully tighten screws until instructed.

Step 1: Attach the back panel to the cabinet frame using the provided cam locks and dowels. Lightly tap dowels into pre-drilled holes on frame edges.
Step 2: Insert cam locks into the corresponding holes on the back panel and turn clockwise to lock.
Step 3: Attach the concealed hinges to the cabinet frame using the screws provided with the hinge set.
Step 4: Attach the mirrored door to the hinges. Adjust door alignment later (see Section 7).
Step 5: Insert shelf support pins into the desired height positions on the inner side panels.
Step 6: Place the adjustable shelves onto the support pins.

Tip: Keep all packaging until assembly is complete in case parts need to be identified or returned.

Wall Mounting

This is a critical step. The cabinet must be securely fixed to a wall.

Locate wall studs using a stud finder. For solid walls (brick/concrete), mark drilling points.
Hold the wall mounting bracket against the wall at the desired height (recommended 150-160 cm from floor for optimal use). Use a level to ensure it is horizontal.
Mark the screw holes with a pencil.
Drill pilot holes at marked points. Insert wall plugs if needed.
Screw the bracket securely to the wall.
With help from another person, lift the assembled cabinet and hook it onto the wall bracket.
Secure the cabinet to the bracket using the safety screws provided to prevent lifting off.

CAUTION! Do not mount above a toilet or bathtub where it may be subject to excessive moisture or impact.

Adjusting Shelves & Door

Shelves: The support pins allow shelves to be positioned at different heights. Remove shelf, reposition pins, and replace shelf.

Door Alignment: If the door is uneven or doesn't close properly:

Open door fully.
Use a Phillips screwdriver to turn the adjustment screws on the hinges.
- Vertical adjustment: Turn the screw at the top/bottom of hinge.
- Horizontal adjustment: Turn the screw on the side of hinge.
- Depth adjustment: Turn the screw at the back of hinge.
Make small adjustments and test the door after each turn.

Care & Maintenance

Cleaning:

Frame & Shelves: Wipe with a damp, soft cloth. Use mild soap if needed. Dry immediately.
Mirrored Door: Use a glass cleaner and soft, lint-free cloth. Do not use abrasive cleaners or scouring pads.

Maintenance: Periodically check that all screws and wall mounts are tight. Do not overload shelves beyond 5 kg per shelf.

CAUTION! Never use harsh chemicals, ammonia-based cleaners, or abrasive materials on the mirror or finish.

Specifications

Article Number: 092.916.22
Dimensions (W x H x D): 60 cm x 80 cm x 18 cm
Material: Particleboard, foil, mirror glass
Finish: White, moisture-resistant
Door: Mirrored, with integrated handle
Hinges: Concealed, adjustable
Shelf Capacity: Max. 5 kg per shelf
Total Weight: 15.2 kg
Recommended Room: Bathroom, hallway, bedroom

Troubleshooting

Issue	Possible Cause	Solution
Cabinet feels unstable	Not mounted to studs; loose screws	Remount securely into wall studs or solid masonry. Tighten all bracket and frame screws.
Door does not close evenly	Hinges need adjustment	Follow door alignment instructions in Section 7.
Shelf sags or wobbles	Overloaded; support pins not fully inserted	Reduce weight on shelf. Ensure support pins are pushed all the way into the holes.
Gaps between frame and back panel	Cam locks not fully turned	Check all cam locks are turned to the locked position (clockwise).
Difficulty attaching door	Hinge screws not started correctly	Remove door. Align hinge plates carefully and start screws by hand before tightening.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty booklet included in the packaging or available at IKEA stores for full terms and conditions.

For missing parts or assembly support: Visit the IKEA website or contact your local IKEA store with the article number (092.916.22).

Online Instructions: Find digital versions of this manual at www.ikea.com by searching the article number.

Safety Notice: IKEA disclaims liability for any damage or injury caused by incorrect assembly, improper wall mounting, or failure to follow instructions.